-Wiseco 85mm pistons. Around 12.0:1 in a b20/vtec setup. Brand new, in the box, w/ wrist pins/ rings/ etc. $375375

 

FS: LS/B20 eagle rods with arp bolts with 100miles if that, switched to bme rods asking 200+PayPal/shipping fees

 

FS: Motec 4g single axis accelerometer. Brand new never used. Paid $280 asking $250 shipped.



FS: (two) Bosch 044 pumps and MB racing pump hanger bracket and J-racing check valves. Paid $700+ asking for $500 shipped. (Kinsler filters not included) -8AN inlet and outlet pump fittings are included.


FS: Custom 2000hp A2W setup. I used 2 Garrett 1000hp cores for this build and it's made with 3/16" aluminum and braced for war. Comes with water resivoir that holds about 1.5 gallons of water/ice. I can include Meziere pump and -16AN lines if requested. Paid damn near $1800 in just parts alone not including fab time. $1300 with everything or $900 for just the IC and resivoir (no lines or pump). IC is coated to control sweat. This thing stays bone dry on the outside.



Any questions feel free to PM me.
Thanks,
Chris

 

Email -- James@IPGParts.com -- Tom@IPGParts.com
Phone -- 407-324-4684

We have an enormous amount of awesome used Drag Racing Parts available

way too much to post here -- http://www.ipgparts.com/store/Used-Parts/

and here are some of the great highlight parts

-- RSX One Piece Fiberglass Front End (have 2 available, a nice one and a not so nice one) -- $399/each or $675 for them both

-- 2002-2004 RSX Fiberglass Doors -- $400/pair

-- 92-95 Civic One Piece Fiberglass Front End -- $350

-- Seibon Carbon Trunk / Hatch for RSX -- $450

-- Weld Anglia Spindle Mount 15x3.5 Skinnies with Tires --$750

-- Avid Traction Bar without Radius Arms (just front cross bar) -- $65

-- Inline Pro 106mm K Series Stroker Crank -- $1700

-- MSD Ignition 7224 7AL-2 Race Ignition -- $399

-- Garrett GT3582R Ball Bearing Turbo T3 .82AR -- $950

-- Modified Kens Kustom Chassis Straight Axle Setup -- $800

-- Ingalls Camber Adjusting Control Arm Mounts -- $89

-- (2) water to air intercooler, different sizes, contact us for pics and specs -- $200/each

-- motec M4 ems, advanced tuning, lambda and logging unlocke (EMS only, no wiring) -- $1200

-- B18a LS Head with ferrea valve springs, retainers, seats (stock valves) and Brian Crower stage 2 camshafts -- $900

 

Here are all of my parts for sale. Please contact me for any additional information or questions. Please contact me via pm or text my number is 516-477-0597. Also if you would like a price on an individual part contact me and i will be happy to provide one. Shipping will be extra. ALL items are negotiable!
P.S. sorry to crazes for the size of the pictures, honestly i do not know how to edit the size

H22a 90mm x 97mm shortblock for sale. $3000 obo. Willing to part out!
All parts have 6 passes on them unless stated otherwise.
Block sleeved, 90mm bore. Main caps align bored to 55mm.
Brand new 97mm F23 crank from Honda (55mm mains)
F23 Crower maxilight connecting rods.
Custom JE pistons, 15:1 cr, Valve pockets for max lift .560", Intake relieved for +1mm intake valves
Brand new oil pump, oil pickup and water pump.
Comes with oil pan, rear main seal, water pipe and t-stat housing, etc.







Brand New in box Cometic head gasket H22 90mm STD thickness. $80


Ferrea Roller cams for H series. Lift, intake:.536" exhaust:.525". I have all paperwork and specs for cams. $700 obo.

Ferrea Roller Rockers for H series. will come with Brand new oem honda valve adjuster screws and lock nuts. Also will come with QSD Vtec solenoid block-off plate. $700 obo.

Custom fuel setup for sale. $700 obo.
Oem Sumped gas tank with 2 -10an outlets.
Aeromotive a1000 fuel pump with relay.
2 Aeromotive inline SS fuel filters(pre and post pump)
-10an steel braided feed line
Aem Fuel rail with fittings, matte black.
Just needs return line made, and FPR to be functional.

Full MSD kit: $50
Full MSD H series vtec distributor
Digital 6al box
External coil
MSD spark plug wires and external coil wire

Other MSD parts:
MSD B series distributor cap
MSD external coil
MSD 2step module


H22a Valvecover Powdercoated "shimmer candy purple" by Billy Hoang. With 4 -10an fittings for catch can setup. $150


QSD Coolant hose water neck plate for head, with hose fitting. This plate will allow an AN fitting for steel braided coolant hoses/fittings. $40


Bseries Ebay Clutch, Stage 4 pressure plate, 4 puck sprung disc, oem flywheel. $120


Brand new Vibrant 3.5 inch race muffler $40

 

Time to get rid of parts that have been sitting around.

SOLD SLICKS!!!


PR3 intake manifold. I spent a ton of money modifying this thing. Comes with Q45 throttle body and TPS pigtail.
$280 Picked up in NY 12550. (or you pay for shipping and PP fees)

 

AEM v2 700 firm


BRAND NEW IN BOX:
dss 5.9 axles hubs and studs
b series

1300firm

903-746-4920(perfer text) or pm here.

both SOLD.

 

Forsale Fresh Sleeved Golden Eagle 75mm O-ring D16z6

$1150 Shipped

 

Competition Clutch Twin disc for D2B setup, Less than 10 passes on it. Almost like new, Looking to get $900 shipped for it.



Real Hondata s300 with boost by gear. Used on my 500whp d16. Will show proof of real and not fake to buyer. $525 shipped

 

FS IS A LS BLOCK OUT OF A 94 INTEGRA LS, I PULLED THIS MOTOR FORM A SCRAP YARD AND DISASSEMBLED IT FOR THE CRANK AND RODS. EVERYTHING INTERNALLY LOOKED FINE, THE CYLYNDERS WILL NEED TO GET THE SURFACE RUST CLEANED UP , BUT NO CRACKS OR SCORING ON THE WALLS OR BEARINGS. I HAVE THE OIL PUMP, OIL PAN, OIL PU, WATER PUMP PISTONS, WINDAGE TRAY, MAIN CAPS WITH BOLTS, THRUST WASHER, THIS BLOCK IS PERFECT FOR SOMEONE LOOKING TO DO A LS VTEC BUILD. PLEASE LET ME KNOW IF YOU HAVE ANY QUESTIONS OR CONCERNS TEXT OR CALL FOR MORE PICS. WILL SHIP AT BUYERS EXPENSE PLUS PAYPAL FEES. ASKING $150.00 OR BETTER OFFER

JON 760-936-2053

 

cleaning up a bit...
all parts were utilized during the 2012 race season and were just recently removed from the cars.

Text with question for quickest response: 253-376-9083

Blox 70mm Throttle body $140
Bogart Pro 4's rear skinnies (rears, wheels only) $400
Golden Eagle fuel rail (black) $75
K-series BME Aluminum rods (brand new) $595.00
B-series BME Aluminum rods, LS length 827 wrist pin (10 hits) $500.00
MSD small shift light - $50
Custom SF EK B Series engine harness - $200
SI rear spoiler $120
B16 port flow cylinder head, heads been completely gone through, valve job, valve seats have been cut, combustion chambers have been opened to 84mm. Like new $1,000 (can sell with brand new oem sized valves that have been lapped to the cylinder head at the machine shop.)

Rear skinnies

Golden Eagle Fuel Rail

Rear Si spoiler

Engine harness... best illustration i have of the harness

BME K rods


BME B rods

 

For sale precision 6765 dual ball bearing turbo you have the option of 3 different turbo housings. t4 1.00 ar twin scroll, t3 .84 ar vband, or t3 4 bolt .63 ar housing turbo has had idle time on it for about 1 hr total and that is all looking for 1000$



id2000 injectors for h22 750$



h22 twin scroll dual wastegate 44mm exhaust manifold made by sheepey 750$ brand new not used at all.



go autoworks 3 sfwd charge piping kit w/ or without the big f.m.i.c. with 400$ without 250$



Chasebays milspec h22 harness with hondata cpr integrated into the harness will include milspec plate, hondata cpr and coils 1200$



h22 Golden eagle intake manifold can buy it complete with fuel rail, 70mm billet throttle body, fuel pressure regulator. Bare manifold 525$, fuel rail 80$, throttle body 250$, aeromotive fuel pressure regulator 6 an 13109 prt num 120$



Prices don't include paypal if you are interested in any other high performance h22 parts let me know and best way to get ahold of me is by text message at 8129297990.

 

SOLD

 

Got a set of used precision 1000cc injectors comes with obd1 plugs and resistor box $320obo shipped + paypal fees *Contact me at 469 471 2344 thanks

Pictures
http://hondamarketplace.com/showthre...9#post48577709

 

****NEW MOTOR PRICE****

I have lots of b series goodies I'm getting rid of, maybe even my motor. All are brand new, never been used. Except the seats.

Full rsx type s leathers, front and rear (no rips or tears). SOLD

BNIB B16/Itr golden eagle mfg. intake mani. $600

BNIB B16/Itr thermal intake gasket
$20

BNIB JE 84mm 8.5:1 Pistons
$400

T3/T4 cast manifold w/ eBay wastegate
$70

T4 front mount manifold, undivided, 44mm wastegate mount
SOLD

The motor..(WILL NOT PART OUT)
Ls block
KMS high flow oil pump
Acl race bearings
Eagle crank
Full arp studs
Bc 625+ rods
85mm JE 10.5:1 pistons
Darton sleeves
Time certs
Ls/vtec conversion
Ported b16 head
Ferrea oversized valves
Ferrea dual valve springs
Bc stage 2 turbo cams
Adjustable cam gears
Gates Kevlar timing belt
Type r water pump
Morosso 5qt tapped oil pan
I'm sure I'm missing some, well over $8000 in parts and labor. The motor was built to hold over 1300hp, everything is top of the line, and professionally built and installed. Asking $5000 firm for long block. $4000 firm for short block, $1500 firm for head. Those prices are bottom dollar no budge. If you add up the price in just parts, no taxes/shipping, there's $5700 in parts. So I'm eating $700 in parts, and $3500-$4000 in labor. You pay for shipping.

Most parts are obo, will ship at your expense, and will trade for k-series parts, 99-00 3 piece ek front, or bys style front bumper, carbon hood, etc.

903-486-7114 call/text for more info/pics.

 

Sold sold sold sold

 

ATI DAMPER(B seires, steel hub)

$275obo SOLD!
front


back


Price drop! $800firm with shippng
Full-Race T4 ProAM(b series)


Price drop. Sold throttle body 225shipped!
Edlebrock VictorX Intake Manifold with BDL 70mm throttle body, includes all sensors(hondata 4 bar)


prices do not include shipping. contact me at 903-746-4920(text) or pms.

 

Sold

 

Hello Folks, It has come to that day that I am actually parting out my racecar. I thought this day would never come but unfortunately it has. Here is a chance for you to pick up some quality parts for great pricing. Everything has low miles on it (between 20-30 total miles) and was kept in exceptional condition. Take a look and feel free to inquire.

p.s. I will keep this thread up to date whenever I sell something, so far stuff has been moving. Feel free to make an offer and if it works, I will get the stuff ready to ship. Thanks in advance.

**::Attention, Email is key, joone.nijjar@gmail.com:**

* ITR Shift Linkage with a BNIB Energy Suspension bushing kit included

* MFactory B16 LSD with bearings

* 4.9 Gear-X Final Drive kit for B16 trans

* Momo Monte Carlo Steering Wheel with Mugen Horn Button and NRG Quick Release as a set.


* Seat Rails & Sliders for Driver and Passenger Side, EG/DC. Used with Side Mount Seats.


* Autometer Oil Pressure Gauge with Sender Unit, Autometer Water Temp Gauge with Sender Unit, and carbon Fiber bezel with slot for one more gauge. Fits into Radio din or Climate Control Slot on EG.


* Skunk2 Oil Cap


* H22 Timing Tension Conversion Complete


* JDM h22 Distributor wired for MSD external Coil. Includes MSD spark plug wires.


* H22 ARP head stud Kit with Lube, used


* ::Low Miles:: H22 oil pump bought brand new, Pro-Drive high pressure Oil Pump Gear installed, Kiazenspeed Balance Shaft Eliminator Kit installed.


* 1996 JDM H22a closed deck block Sleeved with Darton replacement sleeves, 89mm bore.


* ID725 injectors for a Honda K series engine with low miles as well.


* Skunk2 K series 74mm TB with sensors and IAC Block off plate.



* Golden Eagle Oil Sandwich Plate




****SOLD to a Fellow H-T'er**** Thanks "DrCRX"
* H22 Carrillo Rods
* 89mm 13.5:1 CP pistons with relocated wrist pin for use with H22 rods and H23 crank. (20-30 miles tops!!!)

****SOLD to a Fellow H-T'er**** Thanks "92frostwhtdb2"
* PLX Wideband with Gauge.

****SOLD to a Fellow H-T'er****
* Hydro B series Clutchmasters twin disc fx700 Clutch
* DSS level 2.9 B-series axles.

****SOLD to a Fellow H-T'er**** Thanks "92siracer"
* H22 Valve Cover properly baffled and vented. Only releases pressure, not a bunch of oil...
* Custom h2b Scattershield powdercoated Silver

****SOLD to a Fellow H-T'er**** Thanks "Souler"
* Billet Aluminum coolant overflow catch can.
* MSD SS blaster coil
* MSD Digital 6 Ignition System

****SOLD to a Fellow H-T'er**** Thanks "richboy84"
* B&R Catch Can with lines

****SOLD to a Fellow H-T'er**** Thanks "H2BJON"
* Skunk2 k20 Fuel Rail with -6 fitting for fuel in

****SOLD to a Fellow H-T'er**** Thanks "MyLilCivic"
* SSR stainless steel 4-1 race header with bottom exit megaphone for an h2b with an h22 head.

****SOLD to a Fellow H-T'er**** Thanks "weedstnr"
* KStuned h2b Oilpan with pick up and dipstick, no dings/dents/damage.

****SOLD to a Fellow H-T'er**** Thanks "fliplude95"
* Blox Racing EG/DC Traction Bar
* XS FPR with -6 fittings in black.
* H to D series alternator relocator bracket with Alternator and belt
* h22 Euro-R Single Row Crank Pulley

****SOLD to a Fellow H-T'er**** Thanks "lovitalracer"
* Bogart Pro-4 wheels and tires. (car always rested on Jackstands) 4x100
Fr: 24.5x8.5x13 M&H slicks on 13x8 wheels (Back spacing clears brakes as large as Integra GSR/LS/RS/GS
Rr: 24.5x3.6x13 M&H skinnies

****SOLD****
* STR70mm B/H/D TB with sensors-

****SOLD****
* Skunk2 H22 Pro series stage 3 Camshafts**
* Skunk2 H22 Pro Series Cam Gears**
* DNR Ported h22 Cylinder head, includes SKunk2 Valve Train and Supertech Flat Valves.**

Email is the key: joone.nijjar@gmail.com

 

Complete H22 swap ready to run
$4,000
New CP pistons 9.5-1
New Carillo rods
GE block
GE manifold
Pro 1 Cams
Ferrera valves with Ti retainers
Dual valve springs
Head has been worked, makes power to 9700rpm
1680inj
Moroso oil pan
Ramhorn manifold
S400 72mm
Tial 60mm wastegate
New oil pump, water pump, all new bearings, etc.
To much to list. If you have any questions PM me
I had the engine freshened up, then decided to just play with my Z06 and do half mile drag racing.
The valve cover needs to be re sprayed, that's the only Thing wrong with it
Will part out, but I would rather sell the motor complete. I have a dyno video and a video of it running if you need to see it.
The motor has 3 dyno pulls on wastegate since rebuild. It's 100% ready to run work nothing wrong with it.







Forgive the bad picture

 

Selling my set of Fuel Injector Clinic 2150cc NEVER USED
Bought the same set for my K series build. No longer need them for the B series

Please txt
763-772-7592

$700 SHIPPED OBO

 

Tilton B series twin. Used for 5-6 passes. Still like new. $1100 shipped Obo.
Text 240-217-0647 for fastest response.



Inline Pro t4 /t3 manifold with 44mm gate elbow. $350 shipped Obo

Up for sale is a Borg Warner s400sx s372 with race cover. Ex housing is 1.25. Has around 2000 miles on it. Swapped out for a smaller street Turbo. $750 shipped Obo. Text 240-217-0647 for more info.

 

I have a few thing I am putting up for sale.

PM me if you would like details.

All prices OBO and do not include shipping or paypal fees.

ITR exhaust cam (used, good condition) just want what I paid for it - $200

GSR cams w/ stock cam gears (pair, used, good condition) - $75

Neptune Demon board version 1.2 with USB cable - $400

Pics

ITR cam





GSR cams





Neptune Demon board

 

We are cleaning house a little bit here before the move, have some left over used parts. All will ship from Rowlett, TX and can ship today.

Motec mounting brackets $50:



Password JDM battery try $50:



T1 Vacuum block $25.



Xenocron OBD2a to OBD1 conversion harness $35





Assortment of fans, two Torqflo and one Permacool



$50 each

 

Strange Rear Suspension with Strange 750lbs springs for civic/integras
just installed never raced on 700shipped