Well i am kinda curious what everyone seems to be launching at with slicks. above 300whp.

My set up is over 420whp and i have some 23x8 MH slicks i am going to be using tomorrow. I understand track condition has some to do with lauch rpm but im curious is to what or where the cushon is from 6800rpm +

also if possible would you tell the 60' times buy lauching at your rpm and what HP your car is.

Thank yea..

This is gong to help future people not just me. so please remember this when giving information.

 

400+hp, 5800rpms, 24.5x8.5 slicks, 1.7 60ft. As soon as the clutch comes up it goes straight to the rev limiter.

 

digging the pic! i herd Edgewater was nice track! was thinkin about going the 17th.

 

last year i used to launch 330whp on radials at 5k with no anti lag.

this year i did 415whp on 24.5x8.5x13s, launched at 7k with anti lag and it caught traction pretty much right away. i think i had 9 psi in the tires

 

i launch at 6800 rpms with anti-lag and 8psi in the 24.5" MT slicks. and also preloading and cutting 1.6 sixty foots every time.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike93eh2 &raquo;</TD></TR><TR><TD CLASS="quote">i launch at 6800 rpms with anti-lag and 8psi in the 24.5" MT slicks. and also preloading and cutting 1.6 sixty foots every time.

</TD></TR></TABLE>

your anti-lag setup is this through your EMS (hondata..etc) or do you have a separate controll

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hondaruss &raquo;</TD></TR><TR><TD CLASS="quote">

your anti-lag setup is this through your EMS (hondata..etc) or do you have a separate controll</TD></TR></TABLE>

well yea, hondata s300..

 

First time on slicks i launched at 7800 and had a 1.9 60ft. 409whp no anti lag with 24.5x9 mt in a 4dr civic. at mir budds creek.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turboed4dr &raquo;</TD></TR><TR><TD CLASS="quote">First time on slicks i launched at 7800 and had a 1.9 60ft. 409whp no anti lag with 24.5x9 mt in a 4dr civic. at mir budds creek.</TD></TR></TABLE>


what was your time?

 

hondata s300, 7600 rpm two step no antilag(car makes 15psi with no anti lag)

496whp consistant mid 1.6 sixty foots on 24.5x8.5x15, tire pressure was 7.5-8psi, m&h slicks. you might want a little lower with the smaller slicks.

 

cromepro, 6600rpm, 8psi on 2step (no antilag) 23x8.5x15 m&h's 7-8psi, 1.72-1.77 60', 400+whp, full weight (2700lbs) civic sedan.

never had the chance to make a clean run in the integra sedan on the same slicks...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hondaruss &raquo;</TD></TR><TR><TD CLASS="quote">


what was your time?
</TD></TR></TABLE>

12.5 @ 115, spun a little 1st and 2nd and baby'd 4th.

 

Now how many of your guys are on a LSD?

 

Every set up is different. Just take it to the track and try different launch RPM's and see what works out better for you. I used to launch at 7900RPM and changed to a much bigger intercooler and had to change it to 8350RPM so the car wouldnt bog of the line. I run M&H 25x8.7x13 and cut 1.61 60's

 

yea like ^ said. just go out and test to see how your car does best, its not gonna be perfect your first pass.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turboed4dr &raquo;</TD></TR><TR><TD CLASS="quote">First time on slicks i launched at 7800 and had a 1.9 60ft. 409whp no anti lag with 24.5x9 mt in a 4dr civic. at mir budds creek.</TD></TR></TABLE>


what was your time?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hondaruss &raquo;</TD></TR><TR><TD CLASS="quote">Now how many of your guys are on a LSD?</TD></TR></TABLE>

obx lsd

 

OBX LSD's seems they can take a beating. They are becoming more popular. haven't been hearing about them blowing up at all lately. im running one my self.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike93eh2 &raquo;</TD></TR><TR><TD CLASS="quote">

obx lsd</TD></TR></TABLE>