Jan FS Thread
Thread Starter
Moderator
Joined: Feb 2008
Posts: 3,264
Likes: 2
From: queens, ny
Jan FS Thread
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
EVERYTHING HAS TO HAVE PICS NO exceptions
Honda-Tech Member
Joined: Sep 2006
Posts: 351
Likes: 0
From: Albuquerque, NM
Re: Jan FS Thread
I bought this turbo to put on my integra and have decided to leave it with the turbo the integra has and decided to sell this one.
its a Precision 6765 ball bearing billet wheel turbo t3 .82 ar v band rear with 1 (one) hour of dyno time on an integra that made 600 hp then was taken off and sold to me. NO SHAFT PLAY OR END PLAY AT ALL perfect almost brand new turbo
part number PTB505-6765
505-814-4574 text is preferred but will answer calls
price $1,350 OBO plus shipping or paypal fees MIGHT TRADE FOR A 6262 BALL BEARING BILLET PLUS SOME CASH
its a Precision 6765 ball bearing billet wheel turbo t3 .82 ar v band rear with 1 (one) hour of dyno time on an integra that made 600 hp then was taken off and sold to me. NO SHAFT PLAY OR END PLAY AT ALL perfect almost brand new turbo
part number PTB505-6765
505-814-4574 text is preferred but will answer calls
price $1,350 OBO plus shipping or paypal fees MIGHT TRADE FOR A 6262 BALL BEARING BILLET PLUS SOME CASH
Last edited by phantom_bcw84; Jan 17, 2013 at 05:33 PM.
Honda-Tech Member
Joined: Aug 2005
Posts: 682
Likes: 0
From: 45 mins south of Pittsburgh, PA, USA
Re: Jan FS Thread
-Blox tuners stage 3s $300 shipped
-blox traction bars $200 shipped
-aeromotive fpr $100 shipped
-crane coil and ignition $125 shipped
-Chipped p28 $125 shipped
-Kyb agx struts and skunk 2 coil overs $300 shipped
Feel free to msg me any time 724-984-7382
Thanks Floyd
-blox traction bars $200 shipped
-aeromotive fpr $100 shipped
-crane coil and ignition $125 shipped
-Chipped p28 $125 shipped
-Kyb agx struts and skunk 2 coil overs $300 shipped
Feel free to msg me any time 724-984-7382
Thanks Floyd
Last edited by hondacivic946; Jan 6, 2013 at 11:26 AM.
Honda-Tech Member
Joined: Jan 2006
Posts: 2,449
Likes: 1
From: miami, fl, usa
Re: Jan FS Thread
Item: 92 587whp fully built civic part out
Price: $$$$
Location: Miami
Contact: Pm or text (305)409-5776. Don't text me after 10pm
Item Description:[B] Text me for prices i have a ton of parts that aren't listed that ill add
Vehicle Description: I'm parting out my pride and joy. I've owned the car 9 years. I think it's time for me to move on. It's a 1992 civic cx. Everything on the car is for sale. Everything
CHASIS FOR SALE $1300 with GSR suspension, full interior and full wiring. Needs fuel lines
Parts left for sale
Custom Top mount manifold dual 38mm t3 coated $700
$150 for each waste gate with dump tubes tial 38mm 2bolt
$400 for aluminum 2.5" intercooler piping with intercooler and clamps and couplings
Short block $2500
Cylinder head parts
OEM obd1 vtec Dohc distributed with NGK blue wires $120
OEM Valve cover with catch can bungs and cut for cam gears $120
Skunk2 old style Intake Manifold for b16 head $150
Blox spec B Camshafts (bigger then CTR) with skunk2 pro series can gears $450
Arp head studs torqued once $60
B16 head with REV SS valves,REV dual springs, REV titanium retainers and Ferrea bronze valve guides $1100
bdl fuel rail with fittings $80
B series shift linkage $75
Original oem Integra Type R shift *** with nut $40
Momo steering wheel $50
Rear strut bar $40
Front strut bar $40
4 port electronic boost controller purchased from Turbogixxer tuning $45
Catch can $100
No name racing seats $100
Slim radiator fan $40
Oem radiator fan $25
Oem size autozone radiator $40
NGK Blue spark plug wires $40
GSR suspension with 4 wheel disc brakes has h&r lowering springs with stock ITR shocks $250 plus stock suspension
Specs on engine
Engine:
ERL sleeved 84mm b18
Je 84mm pistons
Eagle 89mm rods with upgraded rod bolts
Acl race bearings
REV stainless Steel Valves
REV dual springs
REV titanium retainers
Blox spec B camshafts
Skunk2 pro series cam gears
Skunk2 intake manifold
BDL fuel rail
Arp studs
Cometic 84.5mm head gasket
New oem water pump
New oem oil pump
New oil timing belt
Probably more things I'm forgetting
Chassis
1992 civic cx painted viper red
Cut fenders to fit 24.5x9x13 slicks
I painted the car 5 years ago
GSR suspension 4 wheel disk brakes
H&r lowering springs
No ac
No ps
Has a radio
Has full interior with no carpet
Momo steering wheel
No name brand racing seats(one is ripped comes with rails)
2003 civic SI wheels and tires
Car is basically a true street class race car.
Ran a best 6.8 at 110mph with 587whp and 411trq
Since then I fixed boost leaks and upgraded map sensor to a 4 bar and upgraded the boost controller to a 4 port. Goal was to make 800whp. I didn't have the time to take it to the dyno and have Turbogixxer finish tuning it. He can vouch for the car as well as Damian at td autowerkes.
Here's a few vids from YouTube on the car
[url=http://youtu.be/kdb_JnmdPac]587whp 411wtrq at 27psi 6765 billet t3 - YouTube[/
Photos: Photos:
Coated top mount manifold for t3 and dual tial 38mm wastegate
Rear strut bar $obo
Stock radiator $obo
Distributor with NGK blue wires $obo
Skunk 2 pro series cam gears
bdl fuel rail
Catch can
3 pillar gauge pod $20
Momo Steering wheel $obo
Spare parts OBo
How it looked. 9 years ago when I bought it in high school
Price: $$$$
Location: Miami
Contact: Pm or text (305)409-5776. Don't text me after 10pm
Item Description:[B] Text me for prices i have a ton of parts that aren't listed that ill add
Vehicle Description: I'm parting out my pride and joy. I've owned the car 9 years. I think it's time for me to move on. It's a 1992 civic cx. Everything on the car is for sale. Everything
CHASIS FOR SALE $1300 with GSR suspension, full interior and full wiring. Needs fuel lines
Parts left for sale
Custom Top mount manifold dual 38mm t3 coated $700
$150 for each waste gate with dump tubes tial 38mm 2bolt
$400 for aluminum 2.5" intercooler piping with intercooler and clamps and couplings
Short block $2500
Cylinder head parts
OEM obd1 vtec Dohc distributed with NGK blue wires $120
OEM Valve cover with catch can bungs and cut for cam gears $120
Skunk2 old style Intake Manifold for b16 head $150
Blox spec B Camshafts (bigger then CTR) with skunk2 pro series can gears $450
Arp head studs torqued once $60
B16 head with REV SS valves,REV dual springs, REV titanium retainers and Ferrea bronze valve guides $1100
bdl fuel rail with fittings $80
B series shift linkage $75
Original oem Integra Type R shift *** with nut $40
Momo steering wheel $50
Rear strut bar $40
Front strut bar $40
4 port electronic boost controller purchased from Turbogixxer tuning $45
Catch can $100
No name racing seats $100
Slim radiator fan $40
Oem radiator fan $25
Oem size autozone radiator $40
NGK Blue spark plug wires $40
GSR suspension with 4 wheel disc brakes has h&r lowering springs with stock ITR shocks $250 plus stock suspension
Specs on engine
Engine:
ERL sleeved 84mm b18
Je 84mm pistons
Eagle 89mm rods with upgraded rod bolts
Acl race bearings
REV stainless Steel Valves
REV dual springs
REV titanium retainers
Blox spec B camshafts
Skunk2 pro series cam gears
Skunk2 intake manifold
BDL fuel rail
Arp studs
Cometic 84.5mm head gasket
New oem water pump
New oem oil pump
New oil timing belt
Probably more things I'm forgetting
Chassis
1992 civic cx painted viper red
Cut fenders to fit 24.5x9x13 slicks
I painted the car 5 years ago
GSR suspension 4 wheel disk brakes
H&r lowering springs
No ac
No ps
Has a radio
Has full interior with no carpet
Momo steering wheel
No name brand racing seats(one is ripped comes with rails)
2003 civic SI wheels and tires
Car is basically a true street class race car.
Ran a best 6.8 at 110mph with 587whp and 411trq
Since then I fixed boost leaks and upgraded map sensor to a 4 bar and upgraded the boost controller to a 4 port. Goal was to make 800whp. I didn't have the time to take it to the dyno and have Turbogixxer finish tuning it. He can vouch for the car as well as Damian at td autowerkes.
Here's a few vids from YouTube on the car
Photos: Photos:
Coated top mount manifold for t3 and dual tial 38mm wastegate
Rear strut bar $obo
Stock radiator $obo
Distributor with NGK blue wires $obo
Skunk 2 pro series cam gears
bdl fuel rail
Catch can
3 pillar gauge pod $20
Momo Steering wheel $obo
Spare parts OBo
How it looked. 9 years ago when I bought it in high school
Last edited by 92redhatch; Feb 2, 2013 at 03:27 PM.
Honda-Tech Member
Joined: Dec 2006
Posts: 128
Likes: 0
From: UK
Re: Jan FS Thread
G-FORCE DOG GEARSET FOR B-SERIES
Heres your chance to own a good dog gear set, for a steal of a price. Has had under 15passes at 800whp. Ive had the set inspected by a few people and everyone says the same thing. There like new and unused. There are no signs of stress at all, there ready to be installed.
Price is $3400, located in Tampa.
Gear ratios:
1st- 2.92
2nd- 1.88
3rd- 1.35
4th- 1.00
You get two final drives, ones for 24.5 tyre and the other 26". They are 4.0 and 4.7.
Heres your chance to own a good dog gear set, for a steal of a price. Has had under 15passes at 800whp. Ive had the set inspected by a few people and everyone says the same thing. There like new and unused. There are no signs of stress at all, there ready to be installed.
Price is $3400, located in Tampa.
Gear ratios:
1st- 2.92
2nd- 1.88
3rd- 1.35
4th- 1.00
You get two final drives, ones for 24.5 tyre and the other 26". They are 4.0 and 4.7.
Trending Topics
Honda-Tech Member
Joined: Aug 2004
Posts: 772
Likes: 0
From: 253, WA, USA
Re: Jan FS Thread
Set of Drag Cartel/Saenz Titanium Connecting rods. These rods are extremely lightweight. Lighter than any set of aluminum rods out there. The rods are 6" long, use a .708" pin and weigh in at 292 grams, setup to run an LS bearing. The rods were only ever run on the dyno. Our steel rod motor was so reliable we never had reason to take it out.
$1000
ID 1000cc
sold
$1000
ID 1000cc
sold
Last edited by jdmintegraxsi; Jan 10, 2013 at 12:44 AM.
Re: Jan FS Thread
Srp Ls Rods Arp2000 Big Bolts $250 Shipped
Skunk2 Pro Series Valves only Springs and retainers are Sold $200 Shipped
B16 Victor X Intake Manifold $250 Shipped
Fidanza 8lb Flywheel Brand New $150 Shipped
Skunk2 Pro Series Valves only Springs and retainers are Sold $200 Shipped
B16 Victor X Intake Manifold $250 Shipped
Fidanza 8lb Flywheel Brand New $150 Shipped
Last edited by Twinhype; Jan 10, 2013 at 05:15 AM.
Honda-Tech Member
Joined: Sep 2004
Posts: 144
Likes: 0
From: NEW YORK
Re: Jan FS Thread
Go-Pwr big tube race header has an extra o2 bung for tuning and a v band flange on it already if you want to use it on a street car $850. I am located in New York give me a call if interested 917-847-7476.
Honda-Tech Member
Joined: Feb 2010
Posts: 369
Likes: 0
Re: Jan FS Thread
Parts Forsale or Trade!!!! Text me at 7065877278 for more pics and any questions
EVERYTHING IS OBO!!!
H22 Kinsler 62mm itbs with throttle cable bracket, tps, tps mount, vacuum canister, and map $1800 shipped and paypaled
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
Drop zone engineering b-series mounts "driver side closest side to firewall on the bottom is a little messed up on appearance but does not effect the function of it" $sold
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
c's racing shifter $100 shipped and paypaled
[IMG]
[/IMG]
H22 Crower cam gears $75 shipped and paypaled
[IMG]
[/IMG]
k series pipe with 50mm tial flange and sensor $25
[IMG]
[/IMG]
Fluidampner H22 harmonic balancer $sold
[IMG]
[/IMG]
B-series flywheel $50
[IMG]
[/IMG]
Wildwood pull slave cylinder $40
[IMG]
[/IMG]
K20 86mm 10.8:1 piston $300
[IMG]
[/IMG]
H22 bensen sleeved 90mm block $600
[IMG]
[/IMG]
[IMG]
[/IMG]
B16 trans $600 with stock open diff, $800 with spool "tab is broke where passenger mount bolts up but still bolts up fine and hold"
[IMG]
[/IMG]
bseries half shaft $40, b series rear mount $25, shift linkage $sold
[IMG]
[/IMG]
EG civic hotrod chassis $2500
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG][/IMG]
Also have tons of stock eg parts, h22 parts, gauges, etc...
other parts not pictures
EG carbon roof $300
Skunk 2 pro s front suspension $200
H22 bme aluminum rods $300
RLZ pro head with tond of extra work, ferrea 6000 valves, springs, ad titanium retainers $2000 ready to bold on
LOVE TO TRADE!!!! ALWAYS LOOKING FOR CAR STUFF, ATVS "ESPECIALLY RACING", DIRT BIKES, SUPERMOTO BIKES, SHORT COURSE RACING RC CARS AND MORE
Things i need or would trade for... 72 or 76mm turbo, sleeved block for turbo so smaller than 90mm bore, h series turbo parts for 800+
,
EVERYTHING IS OBO!!!
H22 Kinsler 62mm itbs with throttle cable bracket, tps, tps mount, vacuum canister, and map $1800 shipped and paypaled
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]Drop zone engineering b-series mounts "driver side closest side to firewall on the bottom is a little messed up on appearance but does not effect the function of it" $sold
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]c's racing shifter $100 shipped and paypaled
[IMG]
[/IMG]H22 Crower cam gears $75 shipped and paypaled
[IMG]
[/IMG]k series pipe with 50mm tial flange and sensor $25
[IMG]
[/IMG]Fluidampner H22 harmonic balancer $sold
[IMG]
[/IMG]B-series flywheel $50
[IMG]
[/IMG]Wildwood pull slave cylinder $40
[IMG]
[/IMG]K20 86mm 10.8:1 piston $300
[IMG]
[/IMG]H22 bensen sleeved 90mm block $600
[IMG]
[/IMG][IMG]
[/IMG]B16 trans $600 with stock open diff, $800 with spool "tab is broke where passenger mount bolts up but still bolts up fine and hold"
[IMG]
[/IMG]bseries half shaft $40, b series rear mount $25, shift linkage $sold
[IMG]
[/IMG]EG civic hotrod chassis $2500
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG][/IMG]
Also have tons of stock eg parts, h22 parts, gauges, etc...
other parts not pictures
EG carbon roof $300
Skunk 2 pro s front suspension $200
H22 bme aluminum rods $300
RLZ pro head with tond of extra work, ferrea 6000 valves, springs, ad titanium retainers $2000 ready to bold on
LOVE TO TRADE!!!! ALWAYS LOOKING FOR CAR STUFF, ATVS "ESPECIALLY RACING", DIRT BIKES, SUPERMOTO BIKES, SHORT COURSE RACING RC CARS AND MORE
Things i need or would trade for... 72 or 76mm turbo, sleeved block for turbo so smaller than 90mm bore, h series turbo parts for 800+
,
Last edited by justnprsh07; Jan 2, 2013 at 06:16 PM.
Re: Jan FS Thread
pm for any info or more pics
front mount manifold ceramic coated.t4 non divided 850 obo
one driver side b series solid motor mount $150
gforce window net and mounting kit 50
arias pistons has scoring on the side.150
s372 turbo.-800 1.1 a/r t4 divided 800
str cam gears -80
front mount manifold ceramic coated.t4 non divided 850 obo
one driver side b series solid motor mount $150
gforce window net and mounting kit 50
arias pistons has scoring on the side.150
s372 turbo.-800 1.1 a/r t4 divided 800
str cam gears -80
Re: Jan FS Thread
For Sale:>
1) JDM hid headlight cut out for intake. Hid ballast is dead. Kseries or turbo. $60
2) spark racing b series T4 ram turbo manifold with 3" down pipe made over 600whp on this setup in 2004 $200
3) motorized schwinn bike. 80cc, upgraded carb, k&n filter, boost bootle, springer forks, white wall tires, new rims, beach cruiser bars and more...asking $400
1) JDM hid headlight cut out for intake. Hid ballast is dead. Kseries or turbo. $60
2) spark racing b series T4 ram turbo manifold with 3" down pipe made over 600whp on this setup in 2004 $200
3) motorized schwinn bike. 80cc, upgraded carb, k&n filter, boost bootle, springer forks, white wall tires, new rims, beach cruiser bars and more...asking $400
Honda-Tech Member
Joined: Jul 2008
Posts: 426
Likes: 0
From: kc, mo, us
Re: Jan FS Thread
I have a set of brand new 9:1 CP pistons for d series for sale. These are new/unused only opened box to inspect. Need to sell asap $550 shipped.
Used AEM silver d series cam gear $50 shipped
Used springs and Ti retainers that cam from Z6 head. I believe them to be supertech. But not 100%. $150 shipped
Text or pm 816-898-8951 Matthew
Used AEM silver d series cam gear $50 shipped
Used springs and Ti retainers that cam from Z6 head. I believe them to be supertech. But not 100%. $150 shipped
Text or pm 816-898-8951 Matthew
Honda-Tech Member
Joined: Nov 2006
Posts: 1,305
Likes: 0
From: Midwest Coast CHITown
Re: Jan FS Thread
I bought this T4 top mount i was going to use on my ef and it did not clear...it was made for a eg/dc or will also work with an ek...i just got it back from getting JETHOT coated and so now im stuck with a ramhorn manifold...im asking $575obo for the top mount and the Turbosmart 48mm waste gate and dump...
Honda-Tech Member
iTrader: (2)
Joined: Aug 2008
Posts: 113
Likes: 0
From: Concord, NH, united states
Re: Jan FS Thread
I parted out my street/strip car. PM me with any questions or more pictures.
1991 Acura Integra LS shell, Skunk2 drag coil-overs, ETD traction bar, Lighter-Faster carbon fiber sunroof plug, VIS carbon fiber hood, S&W 10 point cage. $1600
1991 Acura Integra LS shell, Skunk2 drag coil-overs, ETD traction bar, Lighter-Faster carbon fiber sunroof plug, VIS carbon fiber hood, S&W 10 point cage. $1600
Last edited by TegraGSXR; Jan 10, 2013 at 04:14 PM.
Honda-Tech Member
Joined: Dec 2008
Posts: 116
Likes: 0
From: dirty dallas
Re: Jan FS Thread
Pauter xbeam rods *mint (gsr) complete set $450 shipped
kseries rsx type s stock gear set 1-6 $300
includes complete gear set with good syncros
Gsr transmission mint $500 stock
transmission is stock sealed will ship prefer local pickup
k20a2 Arias 12;1 pistons brand new in box $350
stock bore
b16 bare head with internals stock $300
All parts are in perfect working order no bs please....text me for questions
214-576-6367 pics will be up in a few hours
kseries rsx type s stock gear set 1-6 $300
includes complete gear set with good syncros
Gsr transmission mint $500 stock
transmission is stock sealed will ship prefer local pickup
k20a2 Arias 12;1 pistons brand new in box $350
stock bore
b16 bare head with internals stock $300
All parts are in perfect working order no bs please....text me for questions
214-576-6367 pics will be up in a few hours
Re: Jan FS Thread
Manley Performance PRO SERIES TURBO TUFF "I" BEAM STEEL RODS out of my ls vtec had 25 passes at 600hp pulled motor apart to
Refresh and upgraded to alum rods asking 500obo
Refresh and upgraded to alum rods asking 500obo
Re: Jan FS Thread
Got a few parts for sale everything is in good shape i can ship for extra and i take paypal any questions 2402161030 or jokerman1416@yahoo.com thanks
I can text or email you pictures
b18c5 block, sleeved with wiseco pistons/eagle rods. b16 head with supertech valvetrain and blox cams. motor made 750hp on the dyno and has less than 200 miles on it. 3500 obo
Mfactory gsr lsd diff with bearing 450
B series vtec supertech dual valve springs and blox retainers used for three dyno pulls 200
Two 70mm throttle bodies one is a blox other is bdl 175 each or both for 300
Tial black bov used under 100 mile 175
Brand new b series t3 mini ram turbo manifold flanged for a tial mvs gate ceramic coated black 400
Custom intercooler its a garrett 750 hp core fitted for a s200 but can work on other cars
34 wide 11 tall 4 1/2 thick 750
Golden eagle oil sandwich plate with fitting 50
skunk2 dual bend short shifter 50
I can text or email you pictures
b18c5 block, sleeved with wiseco pistons/eagle rods. b16 head with supertech valvetrain and blox cams. motor made 750hp on the dyno and has less than 200 miles on it. 3500 obo
Mfactory gsr lsd diff with bearing 450
B series vtec supertech dual valve springs and blox retainers used for three dyno pulls 200
Two 70mm throttle bodies one is a blox other is bdl 175 each or both for 300
Tial black bov used under 100 mile 175
Brand new b series t3 mini ram turbo manifold flanged for a tial mvs gate ceramic coated black 400
Custom intercooler its a garrett 750 hp core fitted for a s200 but can work on other cars
34 wide 11 tall 4 1/2 thick 750
Golden eagle oil sandwich plate with fitting 50
skunk2 dual bend short shifter 50
Last edited by johnls; Jan 2, 2013 at 06:56 PM.
Re: Jan FS Thread
I can also email or text pictures to searious buyers. ALL PARTS ARE NEW UNLESS ITS NOTED THEY ARE USED.
I want out of the game and want to pay off a few bills to free up some cash.
BLOCK: $3500 (this setup cost double my asking price)
FRESHLY BUILT 0 MILES. 1000hp capible setup!!!!
DART 1.8L HONDA BLOCK
84.5MM o-ringed
Pauter rods
Je 9.5:1 pistons
ARP hardware
Gsr crank
ACL bearings
Moroso 5qt aluminum pan with pickup
HEAD: SOLD!!!
TURBO KIT ITEMS:
SOLD!!!!!!
GSR TRANS: SOLD!!!!!
Exedy Twin SOLD!!!!!!!!!
FUEL AND IGNITION:
AEM EMS 1060 $650
AEM (black) fuel rail $80
AEM 3.5 bar map sensor $100
BOSCH 044 pump with billet mounting bracket $200.00
MISC:
Skunk2 shifter $70
Skunk2 PRO Front camber kit (SOLD!!!)
Skunk2 Rear camber kit (SOLD!!!)
Skunk2 mega power RR 3" exhaust (SOLD!!!!)
Fluidyne Radiator (used) $225
I want out of the game and want to pay off a few bills to free up some cash.
BLOCK: $3500 (this setup cost double my asking price)
FRESHLY BUILT 0 MILES. 1000hp capible setup!!!!
DART 1.8L HONDA BLOCK
84.5MM o-ringed
Pauter rods
Je 9.5:1 pistons
ARP hardware
Gsr crank
ACL bearings
Moroso 5qt aluminum pan with pickup
HEAD: SOLD!!!
TURBO KIT ITEMS:
SOLD!!!!!!
GSR TRANS: SOLD!!!!!
Exedy Twin SOLD!!!!!!!!!
FUEL AND IGNITION:
AEM EMS 1060 $650
AEM (black) fuel rail $80
AEM 3.5 bar map sensor $100
BOSCH 044 pump with billet mounting bracket $200.00
MISC:
Skunk2 shifter $70
Skunk2 PRO Front camber kit (SOLD!!!)
Skunk2 Rear camber kit (SOLD!!!)
Skunk2 mega power RR 3" exhaust (SOLD!!!!)
Fluidyne Radiator (used) $225
Re: Jan FS Thread
Bunch of H22 stuff lying around. All in good shape. Buyer pays ship.
H22 Competition Clutch twin disk setup. with everything (FW/Disks/Floater/Hardware) including the proprietary T/O bearing. Just freshened up with new disks with he upgraded hubs 1500 miles ago. ALso new pilot bushing. Assembly has been balanced, step cleaned up and its good to go. No issues. 10 dyno passes and 1500ish street miles. Holding 750 WHP without breaking a sweat... Disks measure out at .245 and .246. New theyre .250. They are in VERY good shape. Slines are mint. You can see the date I wrote down when I put them in and when they came out.
Let me know if you have any questions
Priced on the deals for quick sale. Going triple. 730 bucks.
Three Eagle Rods and CP pistons (Shelf Turbo pistons @ 89 mm) Broke the fourth rod. These are all mint and have only one Assembly TQ on the ARP 2000 (3/8 shank 7/16 head 2000 bolts) No spun bearings, no issues. All pistons and rods are mint Piston skirts are mint and rings and bearings are still on them. No scratcjes on skirts no det pitting. You can still See the CNC marks on the crowns... I got some Pauters now and went back to 88mm on a new block or Id run them again.
150 bux
50 MM H22A/A1 crank
Came out of running JDM crate motor 100 bux
Garrett T04ZR dual ball bearing turbo Ive had on my car for the past couple summers. It is MINT, No shaft play, no chips. No bullshit. I made 750 WHP and 575 TQ at 35 PSI on my built H22 with this turbo on stock cams. Its ALWAYS had a K&N filter on it, comews with oil restrictor.... Never run anything but Royal Purple, and doesnt smoke or anything it shouldnt do. It hits HARD as hell and makes GREAT power. Still have the original box that it came in.
Specs:
To4ZR
Ball Bearing.
Watercooled.
Turbine Wheel Exducer Size: 64.56mm<
Turbine Trim: 76
Turbine A/R: .81 (T4 hotside, ceramic coated)
Compressor Housing: 0.70a/r.
Compressor Wheel Inducer Size: 66.65mm
Compressor Trim: 64
Also have more H stuff I need to get rid of :
1 Bare H22 head (With cam caps, valves, valvesprings and retainers... No keepers or Spring seats)
2 H22 VCs (1 MINT oem black and one wrinkle coated shaved one)
Brand new ARP H22 head studs (WIth washers and nuts)
H22 VTEC solenoid
1 Set JDM cams and OEM cam gears
Crankshaft timing belt gear
OBD2 Crank position sensors
Complete B series head
H22 Competition Clutch twin disk setup. with everything (FW/Disks/Floater/Hardware) including the proprietary T/O bearing. Just freshened up with new disks with he upgraded hubs 1500 miles ago. ALso new pilot bushing. Assembly has been balanced, step cleaned up and its good to go. No issues. 10 dyno passes and 1500ish street miles. Holding 750 WHP without breaking a sweat... Disks measure out at .245 and .246. New theyre .250. They are in VERY good shape. Slines are mint. You can see the date I wrote down when I put them in and when they came out.
Let me know if you have any questions
Priced on the deals for quick sale. Going triple. 730 bucks.
Three Eagle Rods and CP pistons (Shelf Turbo pistons @ 89 mm) Broke the fourth rod. These are all mint and have only one Assembly TQ on the ARP 2000 (3/8 shank 7/16 head 2000 bolts) No spun bearings, no issues. All pistons and rods are mint Piston skirts are mint and rings and bearings are still on them. No scratcjes on skirts no det pitting. You can still See the CNC marks on the crowns... I got some Pauters now and went back to 88mm on a new block or Id run them again.
150 bux
50 MM H22A/A1 crank
Came out of running JDM crate motor 100 bux
Garrett T04ZR dual ball bearing turbo Ive had on my car for the past couple summers. It is MINT, No shaft play, no chips. No bullshit. I made 750 WHP and 575 TQ at 35 PSI on my built H22 with this turbo on stock cams. Its ALWAYS had a K&N filter on it, comews with oil restrictor.... Never run anything but Royal Purple, and doesnt smoke or anything it shouldnt do. It hits HARD as hell and makes GREAT power. Still have the original box that it came in.
Specs:
To4ZR
Ball Bearing.
Watercooled.
Turbine Wheel Exducer Size: 64.56mm<
Turbine Trim: 76
Turbine A/R: .81 (T4 hotside, ceramic coated)
Compressor Housing: 0.70a/r.
Compressor Wheel Inducer Size: 66.65mm
Compressor Trim: 64
Also have more H stuff I need to get rid of :
1 Bare H22 head (With cam caps, valves, valvesprings and retainers... No keepers or Spring seats)
2 H22 VCs (1 MINT oem black and one wrinkle coated shaved one)
Brand new ARP H22 head studs (WIth washers and nuts)
H22 VTEC solenoid
1 Set JDM cams and OEM cam gears
Crankshaft timing belt gear
OBD2 Crank position sensors
Complete B series head
Last edited by extralargenog; Jan 11, 2013 at 10:01 PM.
Honda-Tech Member
Joined: Jan 2005
Posts: 2,350
Likes: 0
From: bellevue, wa
Re: Jan FS Thread
Thinking about maybe selling my SFWD ready hatch. Car is ready to race no problems or issues.
Car has been down the track less then 15 passes and 6 of which were for me to get my NHRA license.
I have been a best of 9.29@164 on only 35psi. Runs 47-50psi when cranked all the way out, making 983whp 598tq
Car is completely legal and up to date to go 8.50 and slower
Should be a solid 8.8-8.9 car @170+ turned up all the way.
Asking price is 28k with Albins box 20k with stock EP3 tranny
Weighs in at 2240 with me in it. I'm 200lbs
Engine:
Golden Eagle sleeved & O-ringed K20a2 block
86mm Custom Arias Pistons w/upgraded wrist pins, Manley Turbo tuff rods
ACL Race bearings
Stock port K20a2 head, Ferrea Comp Plus valves
Prayoonto racing Stg 2 all motor cams, Supertech valvetrain
Golden Eagle IM, SpeedFactory Thermal IM gasket
70mm Shunk2 TB
ATI race damper
Drivetrain/Chassis:
Drag Cartel Scattershield
Albins K series 1-4 Dogbox
MFactory LSD
Competition Clutch Twin Disc
Hasport Racing solid billet mounts
Blox drag coilovers
Turbo setup:
Precision Turbo Billet PT6766 open .96a/r T4 journal bearing
SpeedFactory Sidewinder
Single Presicion 66mm WG Tial Q BOV
Treadstone 1000hp intercooler
Fueling, EMS, etc:
Hondata KPRO w/ PWM boost control
SpeedFactory 4 bar MAP
Golden Eagle fuel rail, Aeromotive FPR
Injector Dynamics ID2000cc injectors
Dual Bosch 044 pumps with 40amp Boost-a-pump
ASP custom Fuel Cell
ignite red 114 fuel
Car is located in Washington State
Car has been down the track less then 15 passes and 6 of which were for me to get my NHRA license.
I have been a best of 9.29@164 on only 35psi. Runs 47-50psi when cranked all the way out, making 983whp 598tq
Car is completely legal and up to date to go 8.50 and slower
Should be a solid 8.8-8.9 car @170+ turned up all the way.
Asking price is 28k with Albins box 20k with stock EP3 tranny
Weighs in at 2240 with me in it. I'm 200lbs
Engine:
Golden Eagle sleeved & O-ringed K20a2 block
86mm Custom Arias Pistons w/upgraded wrist pins, Manley Turbo tuff rods
ACL Race bearings
Stock port K20a2 head, Ferrea Comp Plus valves
Prayoonto racing Stg 2 all motor cams, Supertech valvetrain
Golden Eagle IM, SpeedFactory Thermal IM gasket
70mm Shunk2 TB
ATI race damper
Drivetrain/Chassis:
Drag Cartel Scattershield
Albins K series 1-4 Dogbox
MFactory LSD
Competition Clutch Twin Disc
Hasport Racing solid billet mounts
Blox drag coilovers
Turbo setup:
Precision Turbo Billet PT6766 open .96a/r T4 journal bearing
SpeedFactory Sidewinder
Single Presicion 66mm WG Tial Q BOV
Treadstone 1000hp intercooler
Fueling, EMS, etc:
Hondata KPRO w/ PWM boost control
SpeedFactory 4 bar MAP
Golden Eagle fuel rail, Aeromotive FPR
Injector Dynamics ID2000cc injectors
Dual Bosch 044 pumps with 40amp Boost-a-pump
ASP custom Fuel Cell
ignite red 114 fuel
Car is located in Washington State