when you guys flow heads, at how many inches of mecury or water is it done
at? And what is the biggest number for b-series any body heard of.

 

Brad from RLZ has flowed over 380cfm at 28" of water!!

 

holy schnikeys.... what lift is that?

 

i think everyone in the industry uses 28" as the standard, even if they don't flow it at that you will most likely hear a converted 28"number.

 

that was with valves in it right?

 

lol, figured that would get some attn. I was kidding about the 380. While I know for a fact that Brad does excellent work, and his stuff makes big power, I don't know what flow numbers he's made.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">lol, figured that would get some attn. I was kidding about the 380. While I know for a fact that Brad does excellent work, and his stuff makes big power, I don't know what flow numbers he's made. </TD></TR></TABLE>

Dayum you Tony I was thinking how the **** he get that hahaha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cptengineer &raquo;</TD></TR><TR><TD CLASS="quote">that was with valves in it right? </TD></TR></TABLE>


I good head will flow more with the valves In then No valves @ all .....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote"> I don't know what flow numbers he's made. </TD></TR></TABLE>

Not that you can discuss ..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">lol, figured that would get some attn. I was kidding about the 380. While I know for a fact that Brad does excellent work, and his stuff makes big power, I don't know what flow numbers he's made. </TD></TR></TABLE>

I saw that and I knew something was fishy!!! I know Brad well and knows he does an AWESOME JOB but 380cfm

 

I figured if other people can claim 380, then Brad can too!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">I figured if other people can claim 380, then Brad can too! </TD></TR></TABLE>

Who claims 380cfm?

 

Lets just say i've heard numbers like that thrown around...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

Who claims 380cfm?</TD></TR></TABLE>

Erick was a few shy of 300 on the intake when he ran 9.92 couple years back ... 80 more than that on a b-series means the flowing with alot more than 28" LOL
unless they mean a S2000 head ...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">I figured if other people can claim 380, then Brad can too! </TD></TR></TABLE>

haha I dont have 380 But this is the highest 4 valve B series i have done ...

haha well it was up long uneff hope the other head porters got it


Modified by MAX_CFM at 5:47 PM 9/9/2005

 

Where's that BS flag when you need it?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">Where's that BS flag when you need it?</TD></TR></TABLE>

thats 318 @ 500

tbones was 306 with a smaller valve

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 &raquo;</TD></TR><TR><TD CLASS="quote">Where's that BS flag when you need it?</TD></TR></TABLE>

Yeah I agree, I call BS!!!

 

This is one that I did, turbo or course. Brad, you's was n/a i take it? Must be with such low #'s.

 

HeHe! get the hip boots out......getting deep in here now

 

i win

 

Is that vtak kicking in at .200" lift?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sloanrad &raquo;</TD></TR><TR><TD CLASS="quote"> HeHe! get the hip boots out......getting deep in here now </TD></TR></TABLE>

hah were just all having fun ...

Tony has Dynoed my heads before ...

He knows whats up I think he flowed some also

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GSC Motorsports &raquo;</TD></TR><TR><TD CLASS="quote">i win

</TD></TR></TABLE>

EXCUUUUUUSE ME James!!!!!! My flow sheet is PROPRIETARY!!! Could you please remove it?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MAX_CFM &raquo;</TD></TR><TR><TD CLASS="quote">

hah were just all having fun ...

Tony has Dynoed my heads before ...

He knows whats up I think he flowed some also </TD></TR></TABLE>

I can tell you on my set up I went from low boost of 18psi and 450whp to 540whp with just an RLZ Head swapped on, then high boost 28 psi went from 616whp to 676whp , we think the turbo was getting outflowed