SOLD

 

*All turbo kit parts, clutch, ignition and injectors have no more than 300 miles and were all bought Brand New*

Full Race T3 Top Mount
4" Down Pipe (dented on bottom)
Precision 6265 BB Turbo .82 A/R T3 Housing
T1 GT4 Dual Back Door I/C
Tial 44mm Wastegate with Dumptube
Tial 50mm Blowoff Valve
AEM Boost and A/F Ratio Gauge (with Wideband Sensor)
Hondata BBG solenoid
Vibrant Vanjen Clamps (plus 1 extra one BNIB)
Vibrant Push Lock fittings with lines
Sandwich plate block adapter with oil line for turbo
Comes with all Piping setup for a DC2. Basically EVERYTHING is included to make this a Bolt-on and go kit. - $4200 obo -

* Will Part Out *


































ID2000 Injectors with AEM Fuel Rail - $750




Spec Twin Disc Clutch - $900








GsR Trans with Quaife Differential - $800






Hondata S300 with BBG Setup - $500




Driveshaft Shop Level 3.9's (with ABS or NON-ABS Hubs of your choice) - $750


ACT B-Series Extreme Duty 4-puck Clutch/PP Kit with OEM GsR Flywheel....200-250 miles MAX. $275











Innovate Wideband with Gauge, Sensor and control Module...$200 obo

 

Bullseye S375 for sale - New!

$900 OBO

 

Franks front end in EG flavor. Has tree riveted in, not yet glassed. I have a reliable truck in my life again so I can meet up if someone is interested.

It's had a little fitment done, but would still need a little TLC to fit your car specifically.

If you're interested PM me, I'm thinking around 600 for it




Autopower roll bar camera mount - 100 shipped



LED Shift light - 40 shipped



Overflow - 50 shipped



AEM Temp Gauge - 120 shipped (Oil/water/trans)

 

AFI forward facing turbo manifold for B series t4/ twin scroll and dual 44mm wg $900.00 you pay for paypal and shipping.


Silly Sohc D16 ramhorn manifold $450.00


Richmond B16/LS spool with VSS gear $250.00


Precision Water/Air 1000hp core with 3 inch inlet and 3.5 outlet $450.00

 

strange sold.

 

H22a T1 cam trigger SOLD

H22a GE cam gears 125 shipped/paypal'd



H23a Crower rods and JE 87mm 9.2:1 pistons, both used but in good condition 530 shipped/paypal'd

 

i have two 90mm q45 throttle bodys both with tps and wiring both in great shape $125 each shipped or will sell both for $200 shipped

 

Location: San Diego,Ca.
Name : Daniel
Contact:dcsprophoto@yahoo.com or 619-994-6875
Not looking for trades.
Willing to ship but at buyers cost


B16 Head Fully Ported and Polished by TB Motorworx
Custom Schneider Valve Springs
Schneider Ti. Retainers
Stock Size valves
Price:$900 OR BEST OFFER




Brand New in Box Scat H beam rods for LS
Price:$300



Custom CP Pistons
85MM
14.1
Valve Reliefs
Paid over $700 New
Used for 1.5 Seasons
Comes with upgraded wrist pins and Spiral locks
Price:$500




NOS Annular Foggers
Cost me 53 each new from summit
Highest Flowing Nozzles on the Market
used for 1.5 seasons
comes with bungs to weld onto manifold
Price:$150 obo


BDL B series Fuel Rail
$60


Battery Terminals
Brand New
Price:$30

 

AEM v2 only used for dyno.
$930.00 Paypal and shipped.
please call or text anytime at 407-766-9123.

 

92 vx clean title Almost Ready for Action.














*

*************************************
shell is sold....

mb on piece front end with mounting kit $500


26x8x14 mh slicks with inner tubes on 14x8 bogarts $550

auto meter boost, oil press, water temp, oil temp egt, and tach $200

accel dfi old version $$$ make offer

98 type r trans with a pro drive spool. $1000

 

I have decided I do not have time to race this year, dispite just finishing this car. This build was good for over 800whp. The majority of the parts have only seen the dyno, 0 passes were made down the track. I am in the process of taking pictures of everything, and some parts are still on the car. Everything should be done within a week. Contact yzracer323@aol.com or PM me on here if you have any questions. Thanks

ID2000s $750


Shortblock: 1997 B18C1 (Less than 100 miles on EVERYTHING)
* Golden Eagle sleeved
* O-Ringed
* 84mm JE 11:1 pistons
* Upgraded Tool Steel wrist pins
* Crower 4340 Steel Billet rods
* ARP 2000 3/8th’s rod bolts
* ACL Bearings
* Moroso Oil pan
*ATI race dampner
$2600 ***SALE PENDING



GSR head, supertech springs, exhaust and intake mani studs, complete minus cams $850



AEM Cam gears, siver $75

GSR Trans w/ OBX $650 picked up


Competition Clutch twin disc $795

Stock axles, B-series $70/set
Half shaft, B series $60/ea


Precision 6765 w/ 1.32 hotside, T4 divided housing $850 *sale pending


Stainless steel clutch line kit for Civics/Integras, Brand New, Includes fittings for Master/Slave cylinders $59 shipped


Powder coated/shaved Valve cover and T1 Catch can w/ Aeroquip hose/fittings $475


Brake tuck kit, Aeroquip fittings, in blue(includes same stuff shown), $129 shipped/ea


2x, b series starters $40/ea

Autometer boost gauge, sport comp silver $25
NRG EK hub $60
NRG EG hub $60

Spinwerks 15” wheels w/24.5 slicks, 4x100 pattern, 2 passes(like new) $495 picked up

XXR 002 15x8 front wheels, black w/ silver lip, +0 offset, New M/H 235s(dyno use) $350 picked up


B-series 4-1 header, not sure of the brand, $75


All prices are best reasonable offer. Prices do not reflect shipping/paypal costs. I would prefer the larger items be picked up if possible. I will try to update the pics asap, thanks

 

Up for sale is a set of LS1 coils with custom wires and mounting bracket for B series.
This setup was built two years ago before everyone was doing coil on plug ignition.
The car made 550whp on pump gas and was stolen before it could go back for the race gas tune. This was one of the few parts recovered. Less than 400 miles on these coils.
250.00 obo you will need a hondata CPR or aem twinfire to run these unless you have an aem ems system.
Email- Jonnyvtecsi@aol.com
Call/txt 484-576-0167

 

outlaw/sfwd racecar part out. PM with any questions. All prices are before shipping and paypal fee.

Car made 918@35psi.

-Long block $6,000
2.0 liter O-ringed race block
Golden Eagle sleeved B18C
CP pistons with upgraded pins
Manley turbo tuff rods
Clevite coated H bearings
CNC Port cylinder head
Skunk valves
Supertech springs and Ti retainers
Skunk Pro 1 camshafts
STR adjustable cam gears
Edelbrock Intake manifold with dual fuel rails
74mm blox throttle body


-Fuel system $1100
2 bosch 044 fuel pumps
8 Bosch 1000cc injectors
Aeromotive Fuel pressure regulator

-Turbo setup
Full-Race twin scroll manifold.......... $1000
Precision 4272 Billet turbocharger....$2600
Tial 44mm MV-S wastegates............$180
Tial Blow off valve...........................$150
Precision air/air intercooler W/Intercooler piping..$400
4 inch downpipe (free with turbo)

-Drivetrain
Liberty Billet housing.....................
Liberty Dogbox Gearset&handcuff.. Trans And housing SOLD
Drive Shaft Shop 5.9 axles w/hubs $1100
Tilton C/C Clutch..........$2700

-Tuning
Hondata S300..........................$450
MSD 7531 ignition (digital7)....................$500
PLX wideband..........................$150
Hondata PWM boost contoller.........$80


-Race car shell SOLD
’95 Honda Civin hatchback VX
Omni Power 18k rear shocks
PIC 12k Front shocks
Full-Race Traction bar w/40lbs lead
solid engine mounts
Corbeau Baja SS race seats
Parachute
10point roll cage

or $20k for everything. Car is still in 1 piece.

 

Posting for a friend

Weldon B2035-A $510 shipped(add 3% paypal). Paypal verified, & great ebay (scoop_gotti) feedbacks.

Pump was repaired by Weldon & been sitting on the shelf ever since, test flow chart is included.

PayPal is ohover@yahoo.com
P.M. Scoop for any questions...

 

lightly used set of Drag Cartel 4.5 in 3 lobe config.
$850

 

1997 Acura Integra
Title in hand
$11,000
Contact - PM or 757-619-0690

Car has current inspection, tags and insurance.

I bought this car with the intentions to race again but thats not gonna happen so up for sale she goes.

Engine/Drivetrain:

K20A Engine
Eagle Rods
Wisco Pistons
ACL Race Bearings
ARP Head Studs
Ferrea valves, valve springs & retainers
Edelbrock 75mm TB
Edelbrock FPR
1600cc injectors
Full-Race Exhaust Manifold
Precision Intercooler
Garrett 4088R Turbo
(2) Tial 44mm WG
4" to 3" Down Pipe
3" Thermal Exhaust w/ Vibrant Muffler
Type S 6-speed trans. w/ Quaife LSD
DSS Stage 3 axles
Carbonetics Twin Disc clutch - carbon/carbon
Scattershield
Koyo RSX Alum. Radiator


Suspension:

KYB Adjustable shocks
Skunk 2 drag race springs
Full-Race traction bar
Energy suspension bushings

Interior:

Apex Guages - oil, boost, water temp
Del Sol seats
Momo wheel
RCI belts
AEM engine mangt.
AEM wide band
10pt cage (expired) NHRA cert
Turbo smart boost controller


Exterior:

CARBON FIBER - Hood, Side Skirts, Trunk and Front Lip
JDM 1 piece headlights, sidemarkers
Painted s2000 Silverstone metallic

Wheels:

15X7 Rays Gram Lights
Cross drilled rotors
(2) new front tires


I'm sure im forgetting some stuff but any questions give me a call.
Attached Images

__________________

 

Selling this for a friend:

Have never had this turbo on my truck, I came across a deal on a GT4276 and plan on selling my Turbo so that I can buy the 4276.

$1200 shipped I literally picked it up on Febuary 16th at the front door. Feel free to ask questions, or text me. I can text pictures 501-860-8683

Its a Precision 76GTSH with a .96 T4 hotside. I take Paypal, or Money order.

 

Exospeed VPD Wheels

Bright Gold
4x100, 13x7.5
+25 offset, Centerbore: 56

Brand new in the box.

$320/pair, have 4

Can ship UPS anywhere

 

Gsr trans with type r differential/liberty hand cuff.... Needs 4th gear.. Everything else is mint.... 750 obo
203 455 7420

 

Brand New

T4 Precision 6765 Journal Bearing Turbo (cast compressor wheel)
- Turbine.96 A/R V-band

$850 shipped anywhere in the USA

I will throw in a free oil feed kit also.

 

Precision 4272r. Has 3 dyno pulls and almost a full pass at the track. $2200+paypal and shipping OBO. Will post pictures tomorrow (Or text @ 626-945-4079) SOLD !!!!

 

SOLD

 

BNIB Edelbrock 75mm Mustang ThrottleBody with Edelbrock Honda Adapter SOLD

 

Skunk2 Pro C suspension for EG/DC/EK
They have the Drag rear springs on them.
10k in front, 18k rear.
$850