Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

Precision 750hp intercooler (PIN053-1015) with 3" aluminum piping and Tial BOV flange (BOV NOT INCLUDED) has 3" Adel Wiggins clamshell clamps on both ends of the intercooler also comes with brackets to hold intercooler so you can bolt onto the frame for perfect fit. Came off my GSR with topmount turbo kit - $600 shipped OBO

willing to trade for parts below + cash on top or i add cash:
Hondata CPR coil pack module
SKUNK2 90mm Throttle body for B series
13" Weld drag rims 4x100

 

Juice2435@aol.com
Location: NJ

For Sale: Injector Dynamics ID2000 injectors. Set of 8. Just Cleaned.
Choice of 14mm or 11mm tops. Plugs included.
Will Split into 2 sets if needed.
$650 for 4 or $1250 for all 8
PM or Email with questions or offers.

GRP Aluminum rods. GSR stroke. .866 wrist pin
3\8 ARP2000 Bolts. Used about 35 passes.
$300\BO

Not pictured: MT 24.5x9x13 slicks used with 10 passes- $150 picked up in nj or $200(roughly) shipped in USA

 

Sold

 

-FS Used Tuner View 2 Large comes with brand new hondata interface, works with S300 V3 and Kpr0 4 $150 Shipped

-FS Brand New in box B Series Denso AC Compressor with clutch, and Brand New Belt. Paid $200 from rock auto. $150 Shipped obo

Can email me at Jdelcorte@gmail.com or text me 203-589-7790

https://www.facebook.com/photo.php?f...e=1&permPage=1

https://www.facebook.com/photo.php?f...type=1&theater

 

M&W Pro 10 Complete Ignition Setup

550$ (Shipping Included paypal fees extra)

Hi all,

Selling a 200-1200hp ignition setup for your Honda. This kit is practically plug and play. All you would need to do is tap two wires (Which I have labelled for you in green) into the ECU and you are good to go. This kit is almost brand new. I used it for 1 dyno sessions and 2 outings at the track.

The kit includes:

- M&W Pro 10 CDI Box
- Crane PS92 Coil
- T1 Mil-Spec harness
- MSD CAP and Wire for external coil
- OEM Distributor setup for this ignition system with new at the time of install OEM Rotor.

Selling for 550$ shipped plus paypal fees. Package deal will not separate.

 

T1 Race Development billet coil cover
SOLD

T1 Race Development billet coil cover. Perfect for use with AEM or CBR coils, has rubber stoppers attached to the backside to hold the coils down. Like new condition

http://i4.photobucket.com/albums/y10...psqc1gatyt.jpg
http://i4.photobucket.com/albums/y10...pswi9qo4nq.jpg
http://i4.photobucket.com/albums/y10...ps0ynxeozq.jpg

5th gear Cuff (have 2 available) used for only a handful of passes.
$150 shipped each

 

SOLD

 

Aeromotive Pro Pump PN: 11102
$400 Shipped OBO
706-346-6024

This pump will support A LOT of power.

 

gone

 

Hello honda tech here to try and sell some stuff.
All prices are with out shipping or paypal fees.

I live in Blythe,CA so shipping to east coast can be spendy.
I use UPS also.

Shoot me offers and for questions.
contact me either here or via text message (760-984-4210)



GO-Autoworks A/C compatible 2.5 in down pipe with 3in exit has 2 o2 sensor bungs, Go-Autoworks cast manifold, and Turbonetics T3/T04 brand new turbo. i would like to sell these altogether. All these parts are brand new and have only been mocked up.-$750




Fuel injector clinic 775CC injectors with pigtails. Brand new never been used
-$250




AEM adjustable fuel pressure regulator for honda fuel rail. Brand new never been used.-$100




Turbo XS dual stage boost controller brand new never been used.-$100




Older used Tial 38mm wastegate with 7psi spring in it.-$100





Older used HKS adjustable BOV-$75



Used Blox racing 0-100 psi liquid filled fuel pressure gauge-$25




38mm mvs to 38mm flange adapter new-$25



38mm mvs stainless dump tube.-$50




Random CX-Racing turbo manifold-$75

 

**SOLD**

Up for sale is my 1993 Civic Hatchback. Shaved engine bay and complete interior. No engine or transmission (engine and transmission pictured are used for mockup. Head, block, and transmission are empty) Not interested in parting it out. 99% of all parts are brand new and never used. The car has been stored on jackstands in my garage and has never seen any weather sense it was painted. Check out my build thread for more pictures and see the hole process. Feel free to ask any questions. I'm motivated to sell No trades

Electronics:
T1 Crank Trigger
AEM EMS V2
M&W Pro 14 Ignition
Zetronix E85 Content Analyzer
(AEM GUAGES AND S2K CLUSTER NOT INCLUDED)

Engine:
Vented valve cover
Catch can
Coolant overflow
Skunk2 Ultra Race 5.5ltr Intake Manifold
Skunk2 90mm Throttle Body
Vibrant Timing Belt Tensioner
ATI Race Damper
Sheepey Top Mount
Tial MV-R Wastegate 44mm (x2)
Tial Blow Off Valve 50mm
Innovative Solid Mounts
Precision Turbo 72mm Billet Wheel Ball Bearing
TSP Intercooler*
3.5” Intercooler Piping
4” Up Pipe (Hood Exit)
Koyo Radiator
Spal Fan

Fuel System:
Full Blown Fuel Rail -10
Aeromotive Fuel Pressure Regulator -10
Bosch 044 Fuel Pump (x2)
Sumped Stock Tank -10 Feed
Billet Twin Fuel Pump Holder

Transmission/Suspension/Misc:
Drive Shaft Shop 5.9 Axles/Hub
D2 Coilovers
Function7 Lower Control Arm
Function7 Subframe Brace
Xenocron Brake Booster Delete
Wilwood Brake Master Cylinder
S2000 Clutch Master Cylinder
Full Race Traction Bar
8 point steel roll cage with parachute mount
Blox adjustable toe arms
Blox adjustable rear camber kit
All Energy suspension bushings*
Adjustable front upper control arms.
ARP wheel studs

 

Im selling a T1 Race intercooler 24 x 12 x 3" with vibrant vanjen clamps for $450 obo for any questions PM

 

Weldon C-2015 Fuel Pump, Used but in good working condition. Good for high pressures (100+psi). 1000hp on gas and 750hp on E85, 500hp on Methanol.

350 shipped.

 

FS: Brand New Speed Factory Race Radiator
$520 shipped
SOLD SOLD SOLD to Desir
9" Spal Fan
14x10x3 overall dimensions
-16an bungs

I ordered a radiator elsewhere specifically made to my requests for fitment in my car. What was suppose to take one week, took 2+ months. Fed up, I bought a Speedfactory Radiator. My original radiator ended up shipping, so I no longer need the SF radiator.

Just received it last weekend. Only taken out of the box for pictures. Looking for $520 (paid $550)

 

New Spinwerks 13x10 wheels with M/T 24.5x9x13 slicks and wheel screws, 15x3.5 skinnies with tires.
$1600 willing to part for the right price. Buyer pays shipping and fees.
Location- Spokane, WA
<a href="http://s31.photobucket.com/user/1979pre/media/Mobile%20Uploads/20150729_205936_zpsoerngssf.jpg.html" target="_blank"><img src="http://i31.photobucket.com/albums/c353/1979pre/Mobile%20Uploads/20150729_205936_zpsoerngssf.jpg" border="0" alt=" photo 20150729_205936_zpsoerngssf.jpg"/></a><a href="http://s31.photobucket.com/user/1979pre/media/Mobile%20Uploads/FB_IMG_1431840628385_zpsucq5bjlm.jpg.html" target="_blank"><img src="http://i31.photobucket.com/albums/c353/1979pre/Mobile%20Uploads/FB_IMG_1431840628385_zpsucq5bjlm.jpg" border="0" alt=" photo FB_IMG_1431840628385_zpsucq5bjlm.jpg"/></a><a href="http://s31.photobucket.com/user/1979pre/media/Mobile%20Uploads/20150729_210040_zpsyv3dkxod.jpg.html" target="_blank"><img src="http://i31.photobucket.com/albums/c353/1979pre/Mobile%20Uploads/20150729_210040_zpsyv3dkxod.jpg" border="0" alt=" photo 20150729_210040_zpsyv3dkxod.jpg"/></a>

 

BEGI FMU. New never used. Bought this years ago and like many of us, new parts end up on the shelf and forgotten.

110.00 shipped.

PayPal only

Email me at turnbuckle1960@aol.com


GARRETT Water to Air IC - SOLD.....SOLD....SOLD....SOLD....SOLD..

Another leftover unused part. Brand new, just sitting around, Old Garret air to water Intercooler. Iit's good to about 600-700 hp.

130.00 shipped. OBO

Brand new

PayPal only.

 

i have p72 ecu on crome and a p28 100 obo
have a 04 good running 120mi k24a4
i have a unichip for a 98 v6 accord u can down load any map off line 200 obo
856 332 4478 text me

 

Whats up Honda tech? A few parts for sale

*Race Spec Mil Spec B-series harness $2k obo

*B-series BMC 8 injector intake manifold $500

*Used K-series fluidamper pulley $250

*Used Tilton Carbon Carbon clutch $3k obo

*Brand New PPG with OEM FD $5k

*Brand New Ferrea K-series Valvetrain (110/lb) with standard size ferrea valves $900

 

FS.
DSS level 2.9 axles $400




Innovative Billet mounts EG, 85A $200 SOLD

Borg Warner S300sx turbo $600




Dual Bosch 044 pumps with T1 holder $380


MSD pro billet distributor with coil, driver, and wires. $350


CX racing intercooler new $160


System 1 fuel filter length 11", -10an, 40 micron stainless steel element $70


all prices are negotiable
paypal: lindsay_leroy@yahoo.com

 

Victor x b16 manifold w/oem t-body & all sensors $225 sold
Aem fuel rail/pressure regulator $125 SOLD
Crane oo12 b-series v-tec cams /factory cam gears $300
B16 head w/valve cover/v-tec solenoid super tech flat valves/springs/retainers/locks fresh valve job $650
Oem obd2 gsr distributor $150
Arp head studs v-tec torqued once $75 SOLD

Shortblock

Price...$2500 obo
Darton sleeved b18c1 84.5mm
Arias pistons 9.5.1
Eagle ls rods Arp 2000 bolts
Ls crank
Acl race bearings mains/rods
Oem timing belt
Oem oil/water pump
Oem gsr oil pan w/10an drain bung

Eg aluminum radiator w/fan $100 obo

4 to 1 Dc sports header $100

Tilton b-series twin disc clutch that was purchased from ipg awhile back came out of 1 of there cars it was rebuilt and has same amount of run time as motor since rebuild $900 obo

Neptune rtp demon w/bbg/clear cover In a p28 ecu $300 pending until Friday
Ziggybuilt 4bar map sensor for b&d series $50

The motor or clutch has no driving time just run time in front of the shop & that was on stock injectors & DC sport header assembled by sharps machine shop

Ek mvr b-series solid mounts $100 shipped

T1 900 hp intercooler w/charge pipe/clamps/couplings 3inch in 3inch out single back door $700
BMC b-series t4 twin scroll top mount w/dumptubes 500
2 tial 44mm wgs $275 apeice
4inch v-band down pipe $150

 

I know its just about the end of the month but I need this sold.
I have a Skunk2 Pro Series intake manifold for a gsr head. Used in good condition. Manifold only. $180 shipped in US only.
I will have more stuff for sale for September.
PM or text @ 580-382-1661
Serious inquiries only.

 

sfwd part out
text me at 316 308 four three six nine for fastest response
all price includes shipping
b series pro 1 cams 550 shipped new
rods bnew 700 shipped
intercooler 24x12x3.5 700
sheepey manifold new 850
60 mm wg 550
id 2k 1500 for all 8
weldon reg 200
fuel rail 100 only mounted