Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

Weld magnum 13" 4x100 centers Freshly powder coated black

250.00 OBO!!!!!

Packaged ready to ship

 

sls down pipe 350 shipped.

log manifold b series 150 obo.

3" and 2.5 " aluminum flange has o ring with clamp $30 ea.

 

BNIB OEM Honda K20 Coils, $150 Shipped

BNIB Edelbrock 75mm Mustang TB With Honda Adapter, $285 Shipped


Virgin P75 Ecu, $100 Shipped


BNIB Aeromotive B-Series Fuel Rail, $120 Shipped

Meziere 19T EWP Idler, $60 Shipped


BNIB SuperTech B18A/B 77lb Spring and Ti Retainer Kit, $300 Shipped




BNIB Ferrea Competition Plus Valve Set Intake and Exhaust, $375 Shipped

BNIB Omni GM Style 4 Bar MAP Sensor, $60 Shipped

 

BW S372 previous owner did about 10 track runs and about 15 dyno pulls - $775

 

Fresh 4 speed GSR Trans with Quaife Diff Liberty Handcuff Yes it come with a top case just not pictured $1400 Shipped Pm me for more info

 

Like new, T1 M&W pro10 with Crane PS92 coil, and harness.

$650 (+shipping/paypal)



Custom dual backdoor intercooler. Supposedly a Garrett core, and is used but in good working condition. Has a few dents and dings, but was told it is in perfect working order. Overall dimensions are 35"x13"x3.5" (core is 24"). 3" inlets/outlets

$400 (+shipping/paypal)





Weld Magnum, essentially brand new. Alot of money in these wheels, centers are BRAND NEW from Weld, and the barrels were professionally polished by CCW. They are assembled with ARP bolts (~$150 worth of hardware on these). Never used since restoring them.

15x10" 6" backspace
15x3.5" 1.13" backspace

$1600 (+shipping/paypal) not 100% set on selling these, but will for the right price.. NOT SEPARATING THE SET
(wheels are now all assembled correctly according to weld. 25ft/lbs, with red loctite)





Brand new skunk2 70mm throttle body

$250 (+shipping/paypal)

 

94 civic cx.... Custom 3 piece front/omni drag suspension/NRG fuel cell/Stroud chute/Kirkley race seat/Impact 5 way harness Stroud window net/Grant quick release stering wheel/Moroso switch panel with chassis wiring harness Oddessy PC1200 battery/GSR brakes front and back/Kens customs brake master with custom braided brake lines Kens custons stage brake/ Chromoly tigged 10pt tru dash cage/GSR shift linkage/New paint 4500 $ OBO

GSR head... supertech valvetrain 85lb springs..skunk tuner 2 cams...AEM cam gears 900$ OBO

DSS 5.9 prolevel upgrade axles...half shaft...GSR pro level spool 2000$
Aluminum half raidatior 60$
Avid solid mounts...B series in an EG 300$
AEM intake temp sensor BNIB 35$
Bone stock 99 GSR Block with caps and girdle MINT CONDITION !!!!! 275$
Bullsye 72mm turbo 1.10 EX housing 700$
24.5X9 MT slicks 200$ 4 1/8 mile hits only !!!!!
AEM wideband 150$ (for logging only no gauge)
Aeromotive 1-1 ruel regulator 130$
T1 style catch can...all lines and fittings and valve cover !! (block fittings also) 275$
B series L19 ARP headstuds TQd 1 time...375
Alterstart 185 amp alternator !

TEXT ME for pics and info 239-438-5267

ALL PARTS ARE IN MINT CONDITION...

 

BNIB b16 flanged Magnus intake manifold 550 shipped...

b-series hot rod front mount t4 divided manifold. with tial 44mm flange for 500 shipped

k-series act 12lbs flywheel BNIB...............200shipped

aebs b16 intake manifold...........120 shipped

custom toyota itbs on b16 flange..........250 shipped..

 

GT4094R housings
2 are 1.19
1 is 1.06
T4 flanged twin scroll
$80 each or trade for a .86

 

MSD Digital 6 with Blaster Coil $250


Shift I Progressive Shift Light BNIB $180
[/QUOTE]

Tial 60mm Waste Gate BNIB SOLD

 

IF INTERESTED CALL 973)390-2982

i have 2 B-series shift linkages 1 with a B16 shifter and another with a GSR shifter $100 each

GSR - victor x edelbrock intake manifold $250 or best offer

Professional Products 68mm throttle body $150

Precision injectors 1200cc - $320 shipped in the U.S




4" aluminum exhuast $700 or best offer (prefer local pick up from north jersey area) fits a eg perfectly but u can modify to fit wat ever u want comes w/ 1 vband clamp



custom catch can sits next to the battery $275
the bracket is welded onto the battery tray*

comes with
battery tray w/ bracket welded to it
all 4 lines and fittings minus the 2 fittins on the actual block




aem ecu obd1 1040 box - $850 or best offer



wrinkle blue valve cover $100

 

(Real) RMF drag headers 4-1 true merge collector w/megaphone 3'' outlet -$600

/// PLz PM ME ON SALE///

 

84mm GSR AEBs Sleeved block - $550 shipped Has helicoils where tranny mounts to block. Has fresh align hone. "Sold"

95cx Hatch shell - $600obo Has new quarters welded and rear discs

GSR crank has been micropolished - $125 + shipping "PENDING"

Need this stuff gone ASAP PM for quickest response. Make offers or trades

 

I have 4 Brand new 2200cc injectors Brand NEW ONLY 4 LEFT

$132.00 each injector clips included extenders are extra. They sell for 180 each.



Grant 1075 - Grant Racing Performance Series Aluminum GT Steering Wheel
100.00 Brand New



Grant 633 - Grant Racing Performance Series Aluminum GT Steering Wheel
90.00 Brand New



15631 - Aeromotive Fuel Sample Check Valve 55.00


GM boost solenoid Brand new 50.00


EARLS -10 to -10 mini filter 35.00


50.00



blemoine02@aol.com

 

FOR SALE:

CIRCUIT WORX SPOOL DIFFERENTIAL(FOR K-SERIES) COMES WITH BEARINGS AND SPEED GEAR AS PICTURED. $300

 

LIBERTY DOG BOX TRANNY/HANDCUFF/ BILLET BELL HOUSING GEARED FOR
26' INCH SLICKS $5000.00 ( DEPOSIT RECIEVED. ) SALE PENDING!

DSS PRO LEVEL AXLES WITH SPOOL $1800.00

or buy as a package for 6500.00!!!


PLEASE PM ME.

 

im selling a set of gsr scatt rods and wiseco pistons and acl race rod bearings....
scatt rods are brand new
acl race rod bearings new
9:1 wiseco pistons have about 300 miles on them...pistons and rings looks flawless

im asking 500 obo u can reach me at 305 281 6495

 

aem ems 1000 for sale asking $700.00pm for more info

 

Wiseco 8:5:1 89mm HD piston brand new in the box $500 ship


H-Ben rods use 8 dyno pass on them like new $200 ship

H22 tranny cable $25 ship

 

Kings Performance Honda S2000 800+whp Street S2King - PARTING OUT SALE!!!

We have decided to move on to the next project, so we are parting out the entire set up. Now is the time for you to take advantage of the perfect set up. Amazing spool up, powerband & wheel horsepower.

This is set up has A LOT of R&D and not to mention is the shop and my personal car.


PARTING OUT SALE:

KP AP1 Stage 3 short block: GE Sleeves w/ O-ring, CP Custom pistons w/ upgraded wrist pins, Pauter HP Rods, New ACL bearings, New tensioner, ARP Head studs, New GE head gasket, OEM oil pump, Balance & blue print $4,500 OBO

KP AP1 Stage 2 head: SuperTech Dual springs, Ti-retainers, Seals, Bronze guides, Ferrea Comp Valve set, KP Port & Polish, Stock cams, Cam gears $1,600 OBO

KP S2000 Dog Box transmission: KP 1st-4th straight cut dog box gear w/ 5th & 6th stock, completly assemble $5,500

Competition Clutch Twin disc clutch kit w/ hydraulic bearing set (Just refreshed) $1,000

KP 1000hp Fuel system: KP Surge tank, KP Dual pump bracket, Bosch 044 fuel pump x 2, All black braided lines, All Black AN Fittings, -8 Fuel filter, Aeromotive Fuel pressure regulator, FBM Fuel rail $1,100 OBO

ID2000 Hi-Imp injectors set w/ plug & play clips - $650 shipped

KP Oil & Water tank kit $275

AEM Boost Solenoid $60

AEM Serial gauge $120

Autometer 45psi boost gauge, Autometer Oil pressure gauge & Autometer Dual gauge pod $100

KP Wire tuck harness & shave engine bay $650


The car was Dyno on a Dyno Jet & the car made :

-550whp @ 15psi on 93 octane gas
-627whp @ 19 psi
-684whp @ 23psi
-813whp @ 32-33psi

Best 1/4 mile pass on Drag Radials : 9.9 @ 142mph

We ran all this passes hitting the rev limiter before the finish line.

http://www.youtube.com/watch?v=JGn-r...el_video_title

Here are some videos of the passes courtesy of GRS-Motorsports:

1st pass: http://www.grs-motorsports.net/video.../22mayo/62.wmv

2nd pass: http://www.grs-motorsports.net/video.../22mayo/92.wmv

3rd pass: http://www.grs-motorsports.net/video.../22mayo/94.wmv


With this set up should see some 9.8-9.7's @ 150mph...


For more info about this car, please email bebo@kingsperformance.com or call (321) 235-2699


WORLDWIDE SHIPPING AVAILABLE!!!


Thanks,

Fernando @ Kings Performance

 

Full Race K-Series divided housing manifold. Brand new, never run or installed - 1350 + shipping


BEP S372 1.25 AR Fully polished comp housing, coated turbine housing. Just received back from BEP for a fresh and complete rebuild. As new and never installed. 990 + shipping.


1994 K-Series EG Shell. Champ White, Long Beach Blue Pearl cage. Perfectly clean, no dents dings etc. CF hood painted, cut for ITB's. 3300 obo








Jojo Callos EG 3 Piece front. Brand new, never painted, sanded/etc... 600

located in CO. Thanks!

 

Selling project build, will sell complete or part out.
Penske 8100 front shocks $800 obo
TWM 52mm ITBS for H22 w/rail, gauge, and regulator $1100 obo
Lenzo 13" wheels with 24.5" slicks $400 obo
Strange single piston front brake kit with strange gt struthttp://www.strangeengineering.net/catalog/100.html $bo
Kens Kustom chasis stage brake and master cylinder $150 for both...SOLD
Autometer tach $100
volt $30
oil press (mech) $40
oil press (electric) $40
coolant $40
Innovate LM1 $175..SOLD

 

FS/FT:

I NEED : S300 / TIAL BOV / TIAL MVS OR MVR

new garrett gt3782r chra center cartridge $800


LS VENOM INTAKE MANIFOLD NEW $500



TURBONETICS GRAND NATIONAL $900 NEW


4G63/T .050 COMETIC HEAD GASKET NEW PN:H1536

 

Z10 Traction Bar EK\EG\DC- $200

BNIB revhard turbokit with sc6152-$1800

Full-race T3 ramhorn turbokit with a 35r -$2500

JG Edlebrock intake manifold B16 -sold

CTR pulley -$50

Apexi vafc- $50

Drag intercooler 22x6.5x2.25-$100

H22a4 aebs sleeved eagle rods, Je pistons Fully balanced
and assmbled. Brand new, never ran-$2000

PPG b-series dogbox tranny with quaife diff- $7000
$6000 gearset only

AEM truboost- $200

turbo xs dual stage-$100

Z10 aluminum oilpan with pickup-$200

4" stainless exhaust for eg hatch- $650