Brian Crower 102mm billet crank
Manley Turbo Tuff rods with B16a journals for BC 102 crank
ARP head studs
ACL B16a rod bearings

$2000 OBO or will trade for K series turbo manifold, turbos, wastegates etc, let me know what you have.

 

S372R with race cover and 1.25 back housing. has a dyno session and a few track passes on it...turbo went 9.01@170mph on Brian Fishers sfwd car $1050 obo

Divided topmount manifold with dual mvs flanges...brand new...made to fit with 372/42r sized turbos $800 obo

Tial mvs wastegate.. never seen boost, only idled for a few minutes... $200 obo SOLD

text for quickest response 954-336-6952

 

Sold

 

FS: 3" Mandrel Bent Exhaust w/ 3" Vibrant Muffler (Polished)
Location: South Florida
Price: $350
Notes: *Has 3" flex-pipe section integrated to front of exhaust. Comes with all hangers and grommets. Very nice and quiet at idle, sounds amazing at WOT!



**Exhaust is all one piece and not really looking to ship, unless buyer pays all expenses and wants me to cut exhaust.


Custom NOS/ZEX Direct Port Kit - $600
**Buyers pays shipping / Paypal add 3%**

*Currently jetted for 125shot. This is essentially two full nitrous kits in one! Comes with 4 Custom Pre-Bent SS Lines, 4 ZEX Single Fogger Nozzles, 4 ZEX 0.030 Jets, 1 Evenflow distribution block, 1 ZEX 3' Purple Steel braided Line, 2 10lb NOS bottles, two NOS Sniper Nitrous Solenoids, two NOS Sniper Fuel Solenoids, 2 sets of 15' -4 AN Steel braided line, 2 sets of bottle brackets, 1 Edelbrock 10-15lb Bottle Warmer, 2 NOS "Shark" Nozzles, 2 NOS Fuel Taps (for Wet setups), 1 NOS Bottle Pressure Gauge w/fitting, ZEX Blowdown tube w/internal threaded fitting.

 

B18C1 Mfactory Pro Series Gear Set-2.786 1st gear, 1.900 2nd, 1.430 3rd, 1.10 4th, stock 5th, and 4.05 final drive. All new carbon Synchros, new bearings and seals. All HPC coated. Has a quaife diff. The trans has about 100 miles on it. Asking $3000.00 shipped but I am open to all offers.

Skunk2 Racing ProS Coil Over setup. Around 100 miles on them-$600.00 plus shipping/paypal

SlowMotion Built Twinscroll T4 top mount turbo- $600.00 plus shipping/paypal.

Everything is OBO and if you want a faster response, email me at gregkolek@yahoo.com. Thanks

 

Parting out the parts I was gathering for my build. Best way to contact is PM. Quicker response email me at charles(at)topendusa.com

-custom wiseco heavy duty 1400hp pistons with upgraded pins bnib $600obo



-H22 BME aluminum rods with drilled oem bearings bnib $550obo


-AEBS Block and stock bore SOLD

-H22 55mm crank $100 plus shipping cost

-Web H22 Pro series Cams and Rockers with spacers bnib $1750



-RLZ CNC bare head still with RLZ $1500


-1600cc denso injectors, set of 4 for SOLD

-EK Outlaw chassis with water to air intercooler setup and B series custom wiring harness, full underbody aluminum pan, dash screen for hondata, parchute mount, 10 point cage NHRA certified though next year, traction bar kit, jojo front end SOLD

-Fire suppression system SOLD

-h22 moroso oil pan and pickup SOLD

-MSD Digital 7 with RPM rev box $575obo


-ProEFI ECU Kit with all sensors and honda obd1 harness (run the same system on my turbo M3) very nice and controllable bnib $2400obo



-Weld Import wheels with 26 inch slicks SOLD

-Kaizenspeed H22 manual tensioner SOLD

-Tilton clutch flow valve bnib $185obo


-H22 ATI Race Damper SOLD

 

K20/k24

Full race side winder kit
6mths old
Full race manifold side winder
Intercooler
Pipes
Tial 44
And bov
Rc 1000cc injectors
3inch dp v band
Garret gt35r bb turbo
Feed line and stainless return
All lines included
Kit has 3k miles

No problems
3700$
3750 shipped
I can text u pictures
Any time
254 368 4694
Kit is flaw less

Or call any time
I am owner of RtR performance in tx
I'm paypal verified and 100% on eBay

 

kosie k1's(2) MT et streets
Your Location: MA
Item Price: ???.00
Item Condition: Used
Item Location: my house
Shipping Options: Local pick-up , Continental US
Acceptable Means of Payment: Paypal , Money order , Bank Certified Check , Cash
My Name: justin
Contact Information: 774-319-9072


have a pair(2) if kosie k1's painted white, no curbage, great condition...will separate for the right price...MT's have only a few passes on them and zero street use...im willing to keep the tires so if the price is not right i will keep them but the rims i would like to see go

 

FS: Custom k24 header made by Go-power motorsports made for big k24 motors - $850 shipped

 

For sale original Weld Racing magnum skinnies 15x3.5 in gold These are NOT the Magnum 2.0...I bought these off another member 3 year ago brand new and to this day they are still brand new.Never got a chance to run them at the track they were just slapped on the car to roll around in and out of the garage,on and off the trailer.M&H rubber is brand new.Price is set at $1100 if i have to ship buyer covers shipping.

 

kareem contac 646 739 9291 or reemb18c1@gmail.com

m factory pro series gears 1st - 4th $2200
m factory pro final 4.05 SOLDDD
84.5mm arais pistons 9.1 new in box SOLDDD
wrist pin locks fell out of box

m&w pr 10 ignition with crane coil $550
and t1 spec harness

 

Strange Struts:



Used for 22 passes and during that time, the car spent the majority of its life sitting on jack stands in the garage. Comes with aluminum, spindle mount rotors and billet aluminum calipers.

Asking $800

Weld Magnum 15x3.5 spindle mount wheels w/ Hoosier 23x4.5x15 Drag Front Tires:



Wheels are powder coated silver (original finish was gold) and will likely need to be redone. The wheels themselves are in excellent condition. They are, however, missing the center caps which can be purchased directly from Weld Racing. The tires have 22 passes on them, they still have plenty of life left on them.

Asking $650 for the wheels with tires mounted (will not separate).

H22A4 Shortblock:




2001 H22A4 Shortblock. The block was attained from a Honda dealership in 2001. It was a warranty exchange on a new prelude that had a blown head gasket. Coolant leaked into one of the cylinders. The block just needs a simple bore/hone and its good to go. It comes with main caps, main studs and main girdle. I've had it for over a decade and unfortunately, I never got around to using it.

Asking $350 ($450 with the crankshaft)

2001 H22A4 Crankshaft:



This crankshaft came out of the block I am selling. It is in excellent condition, no journal imperfections at all. It has been stored properly for as long as I've had it. It just needs to be micro-polished and it's good to go.

Asking $150 ($450 with the block)

H22 Fluidampr Harmonic Damper:



Used, but in great condition.. It kissed the radius rods once which left surface scrapes on the outer edge, but other than that, its perfect for use on another built H/F.

Asking $200

All prices are + shipping.

PM me if you are interested.

 

Fs: hondata boost solenoid $50

Hmu 609 933 0536

 

Up for grabs I have a submersible aeromotive a1000 fuel pump brand new never used $290 call or text 407-687-2302

[IMG]C:\Users\dave\Pictures\aeromotive1.jpg[/IMG]

[IMG]C:\Users\dave\Pictures\aeromotive2.jpg[/IMG]

 

I haven't touched a Honda in years. Time to get rid of all the parts I have left.

Prices do not include shipping.

Gold Weld Magnum 13" beadlock wheels. Brand new, never used. If I remember correctly, weld made very very limited quanity of these for Honda Applications. $850




Full-Race / Garrett GT3567R. Brand new never used. Been sitting on my shelf for a few years. Capable of 700WHP. $1100 OBO



AEM 1020 box. OBD2A. Barely used, plastic still on the front. $600



AEM ignition box with 8 CBR coils. SOLDD



JG B16 head. Fully built, port and polished, 5 angle valve jobs, Ferrea valves, SuperTech Valve springs. $1000


Greddy Type R Blow Off Valve, with pipe and flange. $225


OBD1 B16 distributor $150


STR 68mm throttle body. $150

AEM Wideband. Brand new. $140

ACT Extreme pressure plate, with Competition 6 puck clutch. Used for 500 miles to break in motor. $350


A Ton of -10 black AN fittings, some straight fittings, some elbows, some aluminum weld bungs. Close to 100 fittings. Enough to do a few valve cover breather setups. Give me a list of what you need and I’ll give you the price.


I'll add more parts as I clean out my garage.

 

Cobalt 6016 0-60psi new gauge in box 50 shipped


Spearco Magnetic drive Centrifigal water pump Air Liquid Intercooler pump NEW $65



D16y8 head $100


Innovative Mounts D series or B series Rear and Tans Mount street urethane $75




Camera Cage mount new $75.00



Fuel Sample valve Aeromotive $50


New GM boost controller $35.00


STR cam seal $10


Autometer pills 20.00 for all



Torco 75w140 $85.00 for all 14quarts

 

Posting for a friend.. Any questions contact "David" @ (340)514-3955

Saenz synchronized straight cut gearset for an h22 with handcuff and a quaife diff..

Looking to get 1900.00 for the gearset, and 650.00 for the quaife..
(Or make an offer for both together)
3.071 1st
2.153 2nd
1.667 3rd
1.300 4th
4.18 final drive

 

N2O Progressive Controller NX Maximizer by FJO PN: 15959

BRAND NEW IN BOX, JUST OPENED TO LOOK AT SELLING OUT OF NITROUS AND MODS..$475 SHIPPED


http://www.jegs.com/i/Nitrous-Expres...oductId=957625
·Dual Stage independent output channels (independent profiles for each channel)
·Time-based ramped delivery of nitrous and fuel (unique programmable delay and ramp times for up to 8 gears)
·RPM-based delivery of nitrous and fuel (unique programmable curve for up to 8 gears)
·Throttle-based modifier of nitrous and fuel (reduce nitrous delivery by up to 35% based on throttle position)
·LEAN threshold automatic “cut-off ” when using FJO Wideband system
·Programmable RPM trigger point and cutoff
·Programmable MAP cutoff (when using nitrous as an "anti-lag" system)
·Nitrous pressure sensor input
·Built-in MAP sensor reads from vacuum to 48 psi of boost
·Gear detection for manual and automatic transmissions
·Inputs for arming switch, bottle heater enable switch, 2 trigger switches, throttle position, tach signal, nitrous pressure, and Air/Fuel Ratio (narrow or wideband)
·2 configurable outputs for either: integrated bottle heater control, integrated bottle opener control, automatic N2O purge function, or status LED
·2 ignition retard outputs
·Digital communication port for PC or digital gauges
·Easy to use graphic set-up menus and datalogging using Windows™-based PC
·High current 2-channel solenoid driver

The baddest Nitrous controller made.

 

94 acura integra

price is 5750.00

i am open to offers for trades, if you have something in mind, do not hesitate to ask

***clean PA title***

what is included

* 10 point chromoly cage, includes window net, parachute release cable/handle, has parachute mount but no parachute
* full interior with gsr leather seats (no back seats or rear carpet)
* carbon fiber hood with aerocatch hood latches& carbon fiber trunk, both pieces are color matched
* jojo fiberglass 3 piece front end (jdm headlights)
* oem gas tank with Full-Race sump
* oem suspension, rear disc was swapped out, in favor of rear drum brakes.
* aluminum catch pan/ underbody diffuser

what is not included
*my wheels and suspension
*my engine/turbo setup/driveline
*my electronics & guages
*my master cyl & staging brake
*my fire system
*my steering wheel (stock wheel/column will be in car)

 

Full Race K-Series divided housing manifold. Brand new, never run or installed - 1250 + shipping


BEP S372 1.25 AR Fully polished comp housing, coated turbine housing. Just received back from BEP for a fresh and complete rebuild. As new and never installed. 990 + shipping.


Jojo Callos EG 3 Piece front. Brand new, never painted, sanded/etc... SOLD!!!








Also a 1994 K-Series EG Shell. Champ White, Long Beach Blue Pearl cage. Perfectly clean, no dents dings etc. CF hood painted, cut for ITB's. 3300 obo








located in CO. Email DynoMikeTuning (a t) Gmail d0t com for quick response. Thanks!

 

Sup! I have my Omni power Rear launch springs from my Street Power civic EG up for sale

comes with coilovers and will not separate them, asking $125 shipped and paypal firm!!

 

Dual back door intercooler custom made by SLS(straight line specialties). Made with a garrett core with laser cut and cnc bent end tanks.

Mounts on the bottom of the crash beam but fills the grill perfect.

Core is 24x7.9x3.5 and end to end 33".

This setup has done amazing for me but changing setups around and can no longer use this. This has less than 1500 miles on it

$500

 

parts forsale

complete aeromotive fuel system. from sump to regulator. 550$
fjo injector driver plug and play with precision 1600cc inj. 450$
i have alot more stuff im trying to upload pics but keeps saying error.
may have to try at work on monday

 

FS: BRMS catch can and block fittings. Brand new, never even mounted. I ended up not having the room for it in my chassis. $210 shipped for can and block fittings. Paypal only.

 

Brand new still in the boxes and never been mounted!

Spinwerks 13x8 fronts and rear skinnies

1000.00 plus shipping and paypal fees