Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

Contact:
Rolando
Somerville, NJ
PM here on HT
Email: DynamicPerformance1llc@yahoo.com
Phone: 908-393-5086


LS/VTEC Turbo Long Block (Ready to be put in a car-everything you need)
Stock Sleeves
Crower Rods
JE 9:1 Pistons / 81.5 Bore
ACL Bearings
Port/Polished GSR Head
Skunk 2 Springs/Retainers
Turbo Crower Cams
MSD Pro Cap/Wires
AEM Fuel Rail w/ 750cc injectors
Over $5k invested in the motor. $2800 Firm





DSS 3.9 B-Series $900


Catch Can w/Lines and Fitting $100


GM 3 Bar Map Sensor with harness $50


P28 w/Crome Hardware $250


Turbo Kit
MB Top Mount, 3" Downpipe, 60-1 Garrett Turbo, Manual Boost Controller
Tial 38mm wastegate
Made 600whp on 30psi - $2200




96-00 Civic Power Mirrors. $120 shipped


96-98 Civic black housing headlights. $60 Shipped


Exedy Stage 3 Htper Single Cerametallic Clutch Kit 1991-2005 Acura NSX. Used for a couple months. $600 OBO


Love Fab Tubular Manifold for a B-Series. Flanged for a T3/T4. Comes with Tial 38mm wastegate with dumb tubes. $600 Shipped

 

we have bullseye S370 turbo with a T3 exhaust flange and it has a 3" downpipe openning. this turbo worked great and is just need to sent back to bullseye for a freshen up.



we are asking $600 +3% paypal and shipping.

if you have any questions feel free to pm me.

 

IF INTERESTED CALL 973)390-2982

Precision injectors 1200 - $320 shipped in the U.S

Complete DOUBLE BOSCH fuel system, comes with all fittings and stainless steel braided lines feed and return, red golden eagle fuel rail, aeromotive red and silver regulator, no gas tank, Everything is all put together all u gotta do is intall it $1200

precision PT70 875HP
T4 top mount
turbosmart 48mm wastegate
3" downpipe with flex and a 3" to 4" reducer

$2000

 

FS: Precision Billet T4/6765 single scroll .81a/r $950.00

 

Aem version 2 obd 2b SOLD
golden eagle intake manifold for gsr head 350 shipped
Set of 1000cc EFI Wizards used only dyno time... 400 or obo shipped

 

Ive got a brand new billett 6262DBB .82 precision turbo

Id like to get 1200.00 shipped for it OBO

please email lpmfg@yahoo.com

will have pictures posted tomorrow

 

Bullseye power S259. Freshened up by bullseye. Coated exhaust housing. Looking to get $600 shipped.

 

FS:

garrett 18x12x4.5 air/air intercooler core.

This thing is brand spanking new, just took it out the box


$350

 

silver pro comp 2.1/16 water temp gauge 100-250 temp=30 bux
silver pro comp 2 1/16 0-100 oil psi gauge 40 bux
aem wide band gauge with new sensor 175 bux
silver sport comp monster tach 10,000 with adjustable rpm setting and external shift light=175 bux
phantom 2 1/16 0-100 psi mechanical fuel gauge 30 bux
phantom 2 1/16 30psi boost gauge 40 bux
96-00 civic 2 gauge cluster bezel 30 bux
autometer low oil psi pencil warning light with 15 psi sensor=40 bux
2 gauge pillar mount for 2 1/16 gauges fits 96- civic/integra =25 bux
00 civic si cluster 175 bux

aem 30-1020 ems for obd2 already setup for coil on plug with a few h22 turbo programs in it $600
ferrea roller rocker setup for h22 with h22 all motor roller cams mint like new $1500 or just sell cams seperate( pm for cam card)
2-24.5x8.5x15 m&h slicks lots of meat left work good 200 bux
2- 15"x7" rota sub zeros flat black look new 5x114.3 very light weels 200bux


5x114.3 bogarts slicks and skinnys plenty meat left sell all for $1000
full msd setup will sell cheap blaster2 coil 6al msd wires etc

fullrace_t3 t67ho turbo 82 back/70 front housing p trim wheel no probs at all make offer___
zex dry nitrous kit mint 250 bux
misc stock h22 stuff pm with needs_
''''' LOOKING FOR A ATV WITH PLOW WILL TRADE FOR PARTS OR BUY OUT RITE''''
__________________

 

SLS intercooler
Garret core 24x10.5x3.5
Come with brackets to mount to and EG, has a tial 50mm bov flange welded to the side, can sell it with or with out your choice. It will be welded shut if you dont want it. The endtanks have 2.5' inlet and outlets. Intercooler is emaculent with no damage or blemishes is practicially brand new and only been run for dyno and 4 passes. I am selling because I am wasting more money on more go fast parts I dont really need.
Here is what they cost new:
http://straightlinespecialties.com/s...roducts_id=123

500 shipped anywhere in the lower 48. Call text or pm me with questions.

425-737-8482
Jordan

 

NEW Exedy twin plate for B-trans part# HMO22SR $1000 shipped. SOLD!!!
NEW G-Force/Long shifter with handle and shift ****. $585 shipped. SOLD!!!
NEW MSD billet distributor with NEW external ignition module. $400 shipped.
NEW STR polished scatter shield for H-series. $200
Tial 44mm w/g blue like new. $250 shipped. SOLD!!!

Text me at 626-945-4079

 

AEM Series 2 (part number 30-6040), new in box, fits Honda/Acura with OBD1 ECU plugs. $940 shipped in the continental US.







Brand new RC 550cc K-series injector set, never used, only opened box to take picture. $265 shipped.




Brand New Spec Twin Disc setup, for K-series, part number SA00MT2. Rated to handle 800 ft lbs of torque, which is more than any Honda I've ever dyno tuned, lol. Includes everything show in pic. $1050 shipped.




joe@locashracing.com for more info.

 

Catch Can $100 w/out lines $200 with lines. sold!

GT35R DBB 61mm, 70A/R compressor housing. 67mm T4 1.06 back housing. $700

 

Still have my chassis thanks to a flaker, slacked on getting it back up here. I am offering a package deal with my electronics/random parts if you're interested in something along those lines as well.

Someone please do this chassis some justice

What you see is what I have, anything else pictured that isn't listed is likely gone.

Thanks!


List of parts:

Chassis: $12,000

• 25.5 spec (not yet cert’d, built by NRG to pass cert) 1992 Honda Civic Si
• Strange Rear shock/hub/brake combo. 90lb springs. Double adjustable.
• JAZ 3 gallon fuel cell
• Charge pipe with 2 downstream injector ports
• Kirkey pro-drag seat (mounted to fit into car)
• Franks fiberglass front end
• Franks fiberglass doors/rear hatch
• Carbon fiber sunroof plug – not installed since fabrication is not complete
• Weld Magnum skinnies w/22” MH tires

Electronics:

• AEM Serial - Custom fuel pressure gauge to read higher pressure (above 200 psi) – 250 (Also reads 5 other channels all in one unit)
• 2- AEM Water/Oil temp gauge – 175
• AEM UEGO sensor (external) (Reads low enough for methanol) – 160
• ARC electronics Switch panel w/firewall mounted panel - 300
• 128 pin cannon plug w/1 backshell and pins - 250

Universal Parts:

• Weld Magnum fronts 15 x 10. 4” backspace, 5 x 4 ¾ bolt pattern. (Chevy) Used 28 x 10.5” tires on them
• XS power 16v battery – 225 (may be surcharge for shipping due to weight)
• Safecraft Fire suppression system
• 2 550lb springs and 2 450lb springs. 2.5x8” – 100 a set shipped
• -8 Earls Black fittings – Lots of misc plus hose
• Kinsler K-140 Fuel Pressure Regulator - 350
• Kinsler monster mesh fuel filter -12 in/out - 125

I also have push lock fittings from Legris and about 20' of 1/4 line as well. Black line, fire jacket, and black/nickel plated fittings. You can sort of see the stuff in the last picture near the WG's and chassis. Not sure on a price but I'll take inventory and post up.


HOSE/FITTING Inventory:

-8:

Straight - 2
45* - 2
60* - 2
90* - 4
120* - 2

Hose - 10 feet (I think I've used 3 feet of this tops)

-10:

Straight - 2
45* - 1
90* - 1

-12:

Straight - 2
45* - 1
90* - 2
120* 1

Reducers 10 --> 8 (Qty. 2)

I think there is a misc -6 90*, straight, and maybe 3 feet of new line as well.

Also should have a few feet of -12 left as well.

 

96-00 civc sumped fuel tank was custom built for 2 bosh 044 x2 outlets $150
ek hasport mounts $200
aem 10 channel driver box $100
precison 880 cc inj $150
all parts do not include shipping or paypal fees

 

All for sale...Shipped from CA. PM me if you are interested in anything. Thanks

Carbon Composite Mirrors 6/10 Rating (for EG Hatch)SOLD
SX Pump Model 18203 1000hp 7/10 $230 shipped
Valve Cover ported and shaved (powder coated black crinkle, has some spots not sure if from cleaning or needs to be painted or re-coated) 5/10 best offer
SX Filter and Fittings 8/10 best offer
Rear Hatch Lights 8/10 best offer
Mugen Oil Cap (blue) 8/10 SOLD
Mugen Shift **** 7/10 SOLD
Starter (working) best offer
Amerex Chrome Chemical Fire extinguisher 8/10 best offer
Throttle Cable B16 EG best offer
Skunk composite rail (like new 1 dyno pass 9/10) $115 shipped
Eg Radiator Shroud 7/10 best offer
MSD ignition wires 9/10 $75 shipped
Greddy Profec Boost Switch 6/10 $100 shipped
Vector 400w inverter like new $35 shipped
Spoon Radiator Cap 5/10 SOLD
Anodized Dipstick 4/10 best offer
Shift Linkage B series in EG best offer
RS exhaust 8/10 best offer
Type R head skunk pro series everything valves/springs/retainers 8.5/10 $700 shipped
B16 Darton Block Closed Deck Full sleeves (original block) 84.5 piston bore, Ross pistons (custom clips for stroker crank) , LS knife edge crank, Crower H beam Rods SOLD

 

FS:
aem ugeo o2 controller single channle
part #:
30-2301-01053

120 +shipping



thanks

 

Fs:brand new never used 1000cc rc injectors 300.00 shipped add 3% paypal..







1020 obd2a aem ecu, with serial to usb cable 650 shipped add 3% paypal...(sold)

pm me or email me @ tlake_69@hotmail.com if interested..

 

CTR cams (same as 00-01 itr cams) w/aem cam gears asking 400 + ship

gsr edelbrock intake manifold asking 300 + ship OBO

 

Apexi Power FC OBD2 $500

Garrett GT42 exhaust housing 101 a/r $150

MSD Pro Power coil $80

autometer 2" Phantom oil pressure gauge $30

autometer egt gauge and probe $100

obd1 to obd2 harness $80

MSD 2 step $40

SX-performance fuel filter -10 inlet/outlet $60

Brand new installed password jdm intake thermal gasket b18a $25

2" 4 point harness $80

Set of 2" 4 point RCI belts brand New $160

love fab sidewinder turbo manifold t3/t4 b series $500

 

Snapon Honda valve spring tool $100

The five point harness black$50

 

FS Precision Billet 6768 Ball Bearing .96 Exhaust Housing with Anti-Surge H Cover (4in\3out) Mint condition only 15 passes on it- $2000 Shipped\paypal

 

honda civic race car chassis 7500.00 pm for pics or search user "davef"

 

He picked this up cause it was a really good deal but its to big for hia setup and what he wants to push

Its a Precision Turbo, .60 a/r intake side .63 a/r exhaust
Rated for 630hp
4 bolt downpipe flange

Mint, no shaft play at all
Comes with the downpipe flange

This new is worth a lot and i know that

NOW 700 SHIPPED