FS: custom style fmax kit
Thread Starter
Honda-Tech Member
Joined: Oct 2002
Posts: 771
Likes: 0
From: A city near you
***Updated take a look FS: custom style fmax kit***
Ludespeed turbo kit modeled after the fmax unit:
Piping is for a b series motor in an eg body. will fit other models with modification to piping.
Charge pipe with (2) 440cc injectos bossed on it with the accompanying wiring and mf2 unit. works perfect
Charge pipe is flanged for a blitz dd bov: blitz DD BOV included
T3T4B standard trim
CAI off of the turbo w/ cone filter
revhard manifold w/ stress cuts to avoid breaking the manifold under intense heat
polished tial 35mm wastegate
manual boost controller
downpipe 2.5 downpipe with flex pipe and o2 housing.
***02 sensor not included***
sport comp: Air/fuel, Boost, Greddy EGT Gauge w/bung
turbo timer Apexi (small unit the size of a tampon) measures o2 sensor reading, air/fuel, and battery voltage
This is a very complete kit.
all engine bay piping is red and the intercooler pipes are silver. The intercooler is included
At this point in time im accepting offers i will have a price up as soon as i get everything down on paper.
Modified by boostedb16a3 at 4:30 PM 7/27/2003
Modified by boostedb16a3 at 12:07 PM 7/30/2003
Modified by boostedb16a3 at 4:23 PM 8/8/2003
Piping is for a b series motor in an eg body. will fit other models with modification to piping.
Charge pipe with (2) 440cc injectos bossed on it with the accompanying wiring and mf2 unit. works perfect
Charge pipe is flanged for a blitz dd bov: blitz DD BOV included
T3T4B standard trim
CAI off of the turbo w/ cone filter
revhard manifold w/ stress cuts to avoid breaking the manifold under intense heat
polished tial 35mm wastegate
manual boost controller
downpipe 2.5 downpipe with flex pipe and o2 housing.
***02 sensor not included***
sport comp: Air/fuel, Boost, Greddy EGT Gauge w/bung
turbo timer Apexi (small unit the size of a tampon) measures o2 sensor reading, air/fuel, and battery voltage
This is a very complete kit.
all engine bay piping is red and the intercooler pipes are silver. The intercooler is included
At this point in time im accepting offers i will have a price up as soon as i get everything down on paper.
Modified by boostedb16a3 at 4:30 PM 7/27/2003
Modified by boostedb16a3 at 12:07 PM 7/30/2003
Modified by boostedb16a3 at 4:23 PM 8/8/2003
Thread Starter
Honda-Tech Member
Joined: Oct 2002
Posts: 771
Likes: 0
From: A city near you
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Oct 2002
Posts: 771
Likes: 0
From: A city near you
Thread Starter
Honda-Tech Member
Joined: Oct 2002
Posts: 771
Likes: 0
From: A city near you
I am willing to part out the revhard manifold, Downpipe, and all piping. As well as the Intercoler. Measurements on the intercooler:
Not including endtanks: left to right 20.5"/ 7.5" top to bottom/ 2" thick
add another 1 1/2" on each side to get the dimensions for the endtanks. The endtanks are polished.
Let me know
Joe
Not including endtanks: left to right 20.5"/ 7.5" top to bottom/ 2" thick
add another 1 1/2" on each side to get the dimensions for the endtanks. The endtanks are polished.
Let me know
Joe
Thread
Thread Starter
Forum
Replies
Last Post
aktuning
Classifieds: Forced Induction
45
Jul 10, 2005 12:20 AM