If you don't know what these are get outta this thread I have THREE in my possession.

Got em for $30 shipped... I always use tracking numbers, for your convenience and mine. MPX4250AP, run more boost on your turbo honda!

Located in Prospect PA, $25 if you pick it up Got ~40 vouches on HMT and done many transactions on eBay... if you want vouches let me know, I'm an honest seller.

bump if you view

paypal = danyaklich@gmail.com

****************************

This was the new thread:
https://honda-tech.com/zerothread/1879475
But it was locked because apparently I'm "running a business" which I am not.


Modified by SinisterCRX at 5:42 PM 2/4/2007


Modified by SinisterCRX at 1:06 AM 2/10/2007

 

what will a 2.5bar read to?? It sounds like a stupid question...(14.7 x 2.5 = 36.75) but i dont think it reads to its full potential does it??

 

Most people say ~22 psi is right about its breaking point, but the owner of the oh-so-famous 400 whp Vitara sedan (drunkinmaster1) runs 25 psi through his engine with no fuss. So I'd say its atleast good to there

 

 

alright sweet....i might pick up one of these

 

Just let me know

 

late "night" bump

 

to the top

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SinisterCRX &raquo;</TD></TR><TR><TD CLASS="quote">to the top</TD></TR></TABLE>

 

up

 

im interested. how far are u from the phildadelphia area? ill pm u when i get home from work.

 

im debating between getting one of these or getting the gm 3 bar, because this one looks a bit fragile. how sturdy are these things in comparison to the gm?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Heylookits shawn &raquo;</TD></TR><TR><TD CLASS="quote">im debating between getting one of these or getting the gm 3 bar, because this one looks a bit fragile. how sturdy are these things in comparison to the gm?</TD></TR></TABLE>

same here

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by projEKt B &raquo;</TD></TR><TR><TD CLASS="quote">im interested. how far are u from the phildadelphia area? ill pm u when i get home from work.</TD></TR></TABLE>

Other side of the state Shipping would be a much better option IMO. Unless you feel like a road trip hahaha.

The GM 3 bar is a good option as well ,but also about 2.5x the price if I remember correectly? I've seen these sensors used on many turbo applications, it's a good piece... just gotta be careful with it

 

ttt

 

hrm, yea the gm peice goes for 50 bucks, and thats without the "pigtail" harness. so basically 75 bucks, in comparison to 30 for this one. can you point me in the direction of a wiring diagram for one of those things? cause it seems to have 6 prong things, and the stock map only has 3 wires. im guessing you just use the 3 for voltage power and ground yea?

i think im going to paypal you later on tonight if i decide to scoop one of these up

 

^ those are the three you use..



You can see the pin with the notch in the top.

Here's also the manufacturer's diagram of the sensor:

http://rocky.digikey.com/WebLi...S.pdf

Basically if you need some wire radio shack is your friend

 

alrighty thanks for the help, payment sent

 

Just waiting for payment to clear and it's going out

******NEW THREAD***********

https://honda-tech.com/zerothread/1879475


Modified by SinisterCRX at 5:46 AM 1/30/2007

 

https://honda-tech.com/zerothread/1879475

Well I guess I'm bringing this thread back up. ???

A mod locked my thread saying I look like I'm "in business"....

I'm selling a few map sensors on the side that I had here. That's not a "business". Please message me asking me the nature of my thread before you lock it, thats just ****-like

 

up.

 

 

 

i might need one of these, not sure yet. on me.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">


i might need one of these, not sure yet. on me. </TD></TR></TABLE>

just let me know