Need installer cash ready
ok ya i probably should post this in the buy sell thread but i dont think anybody looks there and i really want this done fast. i need somebody in or around the valencia area with atleast some car audio know how that i can trust to install an amp for me. im sick of not having bass in my car and the car audio shops around me are asking crazy prices to install this crap so let me know via pm or in this thread.
lol i wish u did, im dying to have it done like asap but cant find anybody in my area, i got pissed today when my friend who said he would install it said he was busy and this is not the first time so i made an appointment at best buy for tuesday. anyways if anybody can do it sooner and for less then 60 bucks id love to get it installed. id like to stay at that 40 price mark
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">ew stay away from bestbuy
take my word on that </TD></TR></TABLE>
Rrrriiiggghhttt.... And you're credible because you had one problem?
take my word on that </TD></TR></TABLE>
Rrrriiiggghhttt.... And you're credible because you had one problem?
Jeez man... Why don't you just attempt it yourself and post up if you hit a snag????
First of all, do you have an aftermarket deck in the car?
Start off by pulling up the sill plates and kick panels. Run your power wire through the firewall and tuck it under the carpet all the way back to the trunk.
Plug the RCA's into the appropriate jacks on the deck, and connect your remote wire to the blue or blue/white wire coming off the deck. Run these 2 wires back on the other side of the car to the trunk, tucking them under the carpet.
Replace sill plates and kick panels.
Locate a seat bolt or sometthing for your ground wire and clean off the paint and screw down the ground.
Attach the ground wire to the neg (or GND) terminal on your amp. Attach the power wire to the + (or POS) terminal on the amp. The remote wire goes to the REM terminal on the amp. Plug the RCA's into the input jacks on the amp. Run speaker wire(s) to the terminals on the sub box. Connect power to your battery (with fuse less than 12-18 inches from the battery.
Done. Now you have bump and you're at least $40 richer.
First of all, do you have an aftermarket deck in the car?
Start off by pulling up the sill plates and kick panels. Run your power wire through the firewall and tuck it under the carpet all the way back to the trunk.
Plug the RCA's into the appropriate jacks on the deck, and connect your remote wire to the blue or blue/white wire coming off the deck. Run these 2 wires back on the other side of the car to the trunk, tucking them under the carpet.
Replace sill plates and kick panels.
Locate a seat bolt or sometthing for your ground wire and clean off the paint and screw down the ground.
Attach the ground wire to the neg (or GND) terminal on your amp. Attach the power wire to the + (or POS) terminal on the amp. The remote wire goes to the REM terminal on the amp. Plug the RCA's into the input jacks on the amp. Run speaker wire(s) to the terminals on the sub box. Connect power to your battery (with fuse less than 12-18 inches from the battery.
Done. Now you have bump and you're at least $40 richer.
Thread
Thread Starter
Forum
Replies
Last Post
EvenStar
Northern California (Sales)
1
Jan 23, 2007 06:18 PM
OneSickJDMBB6
Honda / Acura
20
Nov 17, 2005 08:27 PM




