Project Chiney K
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Project Chiney K
Names Terrence. Been lurking the forum for a while and decided to post up my FA5 SLOW build aka "Chiney K" as i dumped all the green into school. nothing special just making my version of my ideal ride now that i have no student loans to pay along with two jobs.
Mods
P2R Rear tie bar
Skunk2 Pro-S Coilovers
SPC Rear Camber arms
Ingalls Front Camber Bolts
Progress rear Swaybar
JDM Front and Rear H Badges
8k hids
3k fogs
the day i brought her home(came with the HFP Lip)
first mod plate conversion
then i got pulled over for yellow hids (which came on the car) so i changed them
current setup
also decided to change the badges
did a suspension conversion
also repainted my stockies so i was rocking prelude stockies for a short period
took a trip to 8th fest and noticed that everyone was rocking almost the same intake setup so i embarked on a mission to make my own custom intake. again nothing special.
HKS super megaflow filter for DC5/EP3 application
contents (although half of the stuff was never used)
here it is mounted onto MAF pipe cut from 07 CR-V airbox cover
before
after
then decided to create my very own "signature" after becoming fascinated with the Nurburing decal on the sti
Jam-Spec (Jamaica Spec) FTW
thanks for looking. i know i still have a long way to go.
Mods
P2R Rear tie bar
Skunk2 Pro-S Coilovers
SPC Rear Camber arms
Ingalls Front Camber Bolts
Progress rear Swaybar
JDM Front and Rear H Badges
8k hids
3k fogs
the day i brought her home(came with the HFP Lip)
first mod plate conversion
then i got pulled over for yellow hids (which came on the car) so i changed them
current setup
also decided to change the badges
did a suspension conversion
also repainted my stockies so i was rocking prelude stockies for a short period
took a trip to 8th fest and noticed that everyone was rocking almost the same intake setup so i embarked on a mission to make my own custom intake. again nothing special.
HKS super megaflow filter for DC5/EP3 application
contents (although half of the stuff was never used)
here it is mounted onto MAF pipe cut from 07 CR-V airbox cover
before
after
then decided to create my very own "signature" after becoming fascinated with the Nurburing decal on the sti
Jam-Spec (Jamaica Spec) FTW
thanks for looking. i know i still have a long way to go.
Last edited by Squidette; 02-26-2010 at 08:00 AM.
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
#7
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Re: Project Chiney K
im going bro, not sure if i will be boosted by then though . its all good tho a new coilover and wheel setup coming along flashpro and my bride seat will do
#15
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Re: Project Chiney K
thanks alot man
hmmmmmmm new shoes? this is interesting
hmmmmmmm new shoes? this is interesting
#19
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Re: Project Chiney K
#22
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Re: Project Chiney K
Update
Had the third gear replaced so no more tranny issues.
Just ordered the buddyclub seat bracket for my ZETA ll Seat i had sitting for a while along withe Resistors for mu airbag light. also decided to fix my evo8 wheels as i got lug nuts and hub centric rings from my good friend SHG EasyE. brakes are due so a BBK is the perfect excuse.
Had the third gear replaced so no more tranny issues.
Just ordered the buddyclub seat bracket for my ZETA ll Seat i had sitting for a while along withe Resistors for mu airbag light. also decided to fix my evo8 wheels as i got lug nuts and hub centric rings from my good friend SHG EasyE. brakes are due so a BBK is the perfect excuse.
#25
Honda-Tech Member
Thread Starter
Join Date: Feb 2009
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Re: Project Chiney K
as i stated before im gonna be riding on Evo 8 Rims that are currently being powdercoated. they were pretty beat up but 250 bucks i got 5 rims from 3 junkyards so its worth it
heres one
After
heres one
After