<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Weak!EG &raquo;</TD></TR><TR><TD CLASS="quote">i just picked up super street.. congrats on the cover!!!!!!! </TD></TR></TABLE>

Same here. Loving the article!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by donut. &raquo;</TD></TR><TR><TD CLASS="quote">
btw: if you put a light coat of brake fluid on them and drive around til your brakes get nice n' hot, they'll turn back to that oem bronze
</TD></TR></TABLE>

No ****! Seriously.

I'm about to upgrade to legend brakes up front and gotta clean then up.

 

are you getting a big brake kit?

thanks for picking up the mag

had to drill into the shock tower to mount my fpr. took alot of time to figure out how im gonna run the SS hose without kinking it, getting it too close to the timing belt and mc brace . SS hoses aren't very flexible so this is what i came up with. i might assemble another hose to see if i could run it straight to the rail but the angle is a little off. hmm

 

^^Looks good to me, and congrats on the super street cover

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by donut. &raquo;</TD></TR><TR><TD CLASS="quote">

yeah they look pretty shitty huh lol. im not too worried about them looking like that. i plan on swapping them out for endless or spooms later anyway

!</TD></TR></TABLE>

BRAKE fluid eats paint.. LOL so id rather not! HAHaH

Looking great goober

 

Sickest EGG ever man craftmanship is top notch man keep going

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by donut. &raquo;</TD></TR><TR><TD CLASS="quote"> took alot of time to figure out how im gonna run the SS hose without kinking it, getting it too close to the timing belt and mc brace . SS hoses aren't very flexible so this is what i came up with. i might assemble another hose to see if i could run it straight to the rail but the angle is a little off. hmm
</TD></TR></TABLE>

Have you looked into Pro-Lite hose? It's got a lot more flexibility and give than the ss braided stuff and is much easier to work with (no sharp ends!). It's what I used when I converted my fuel hardlines to that and an inline filter, no problems yet!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16B_coupe &raquo;</TD></TR><TR><TD CLASS="quote">

BRAKE fluid eats paint.. LOL so id rather not! HAHaH

Looking great goober </TD></TR></TABLE>

Yeah I got to thinking about that too.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16B_coupe &raquo;</TD></TR><TR><TD CLASS="quote">

BRAKE fluid eats paint.. LOL so id rather not! HAHaH

Looking great goober </TD></TR></TABLE>

haha, yeah, but if you do a light coat, it wont drip or anything on your wheels. that or you can use a heat gun. just be careful with the piston

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sh!tsWEAK! &raquo;</TD></TR><TR><TD CLASS="quote">

Have you looked into Pro-Lite hose? It's got a lot more flexibility and give than the ss braided stuff and is much easier to work with (no sharp ends!). It's what I used when I converted my fuel hardlines to that and an inline filter, no problems yet! </TD></TR></TABLE>

right now im running perform-o-flex. i waaaaas gonna get the prolite but wasn't feelin the black thats the only thing. i might try something else with this setup. i have an idea

 

did you not have room to mount it on firewall? thats what i did as well as a bunch of turbo cars.

 

i forgot i had a guage hah. my camera is so shitty. one minute it takes nice pix, then shitty pix the next minute cause i dropped it so many times LOL



<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietjdmboi &raquo;</TD></TR><TR><TD CLASS="quote">did you not have room to mount it on firewall? thats what i did as well as a bunch of turbo cars. </TD></TR></TABLE>

i do near where the battery use to be but the way the hoses would have to be run would look like a clutter

 

other then that..aeromotive makes a fpr that mounts on the rail. so you dont have to run the lines. it is an oem replacement piece.

 

you can mount this fpr on the fuel rail as well but neither would work anyway cause of my master cylinder brace on my strut bar

 

i meant like this, it doesnt mount at the end.. but like oem.

 

Nice car!

Congrats on the cover of SS. i picked my copy up yesterday when I seen a hatch on the front. I started reading the article, then was on here and realized it was the same car

Very nice!!! :thumbsup:

 

i like the fpr i have now and the way its mounted though

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JST1CAM &raquo;</TD></TR><TR><TD CLASS="quote">Nice car!

Congrats on the cover of SS. i picked my copy up yesterday when I seen a hatch on the front. I started reading the article, then was on here and realized it was the same car

Very nice!!! :thumbsup:</TD></TR></TABLE>

thanks man

 

what's crazy dude is that I never buy magazine anymore. Considering that I guess most of them for free.

Cause I heard about your car being on the cover, I had no choice but to buy it dude

I have to honestly say it was worth it dude. Hands down one of the best EG's i've seen "Period". If my hatch could look half as good as yours I would be happy.

Your build up thread is just [freak]ing amazing. Keep up the good work.

donut
super street cover

 

thanks again donavan

well i got the ****** started with some jumper cables but good news, after i shut it off, it wont start again

as it turns, the odyssey battery is shot after sitting for a month. good thing it came with a 2 year warranty and summitracing is sending another btw dont mind the line from the fpr to the IM, its temporary

 

You're missing a headlight bolt

 

whoa, you got a cover feature???

congratulations dude!! i've been following this car for a long time. it is well earned, much respect.

 

Congrats on the feature I got it in the mail the other day.

 

Still one of my favorite hatches...so simple

 

buy my old school hks gauges mike....they'll go great w/ your cam gears

 

thanks for getting the mag!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brewer &raquo;</TD></TR><TR><TD CLASS="quote">You're missing a headlight bolt </TD></TR></TABLE>

yeah that thing bugs me so much. the fricken tap broke off in that hole i gotta get a e z out bit or something cause a reg drill bit doesn't work

jarel you still haven't sold those?? i can't see the pix right now cause im at work so ill let you know later

 

How do you like that bdl fpr? I was looking at the aeromotive and then saw they had one.

Congrats on the SS cover too

 

Congrats on the cover, I seen it the other day.

Nice brake setup, I am running the same 11.1/4x100 on my hatch.