How long do you need to pull out the engine of the type-R? I did it several times now and was finished after 1 hour and 50 minutes :D

 

I'm sure it takes longer to remove than those tail lights you're gonna sell me right? Huh, huh, nudge nudge?

 

You sure sound like you have it down to a science!

 

if you have the proper tools, it shouldn't take more tahn 2 hours

first time i did it in my drive way took me 7 hours from 11am to 6pm
***, was i tired taht day

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HypeR1004 &raquo;</TD></TR><TR><TD CLASS="quote">if you have the proper tools, it shouldn't take more tahn 2 hours </TD></TR></TABLE>

took me 45 mins. just unplug the main harness from the ecu, and the drivers side plug..saves you a WHOLE lot of time that way...after oil is drained, coolant, and tranny fluid, its a breaze. ive heard of people doing the WHOLE SWAP in 45 mins before though. but there were 7 people doing it.

ohh, and i didnt use an airgun for the axles either.

good timing though, not bad

 

Never done it before, but as far as i know that is pretty fast.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HypeR1004 &raquo;</TD></TR><TR><TD CLASS="quote">first time i did it in my drive way took me 7 hours</TD></TR></TABLE>

lol, thats about right...

 

I know its not a B18C5 but its the same job...myself and three freinds pulled a B16A from an EK SiR (crashed) and fitted it into another EK VTi (UK) plugged everything back together and had it running in approx 4 hours, taking it out was the quickest part....i'd say slightly less than 1.5 hours.

 

with handtools and a floor jack. gimme an hour and ill have the subframe with motor and susp sitting on the floor.

 

we took my friends civic motor out in less than an hour... but we had all the tools u could ask for
itr's harder tho

 

never done it before so i figure to take me all day. i have been considering pulling my engine while its in storage and doing a small rebuild

beater or build engine? hmmm

 

I have some friends who own a shop and they can pull engines in about 45 mins. But thats what they do for a living....

It would take me all day probably. Or I could HULK up and throw it over my shoulder

 

I pulled a stock ITR engine in an hour, back on the ground with wheels on and no fluids on the ground

 

damn i wanna pull mine out.

 

thats a good time. I need a beater so I can pull my R's heart.

-Andrew