Spoon
Hi, just new here,
I have an Australian delivered ITR,
Need help on Mods...
I have
Apexi Power Fc,. spoon cam gears, cams, valve, valve springs, throttle body, gasket, spark plug, ground wires.
Does anyone have dyno or know of any places as to what power increases I might expect from these ( the car is under surgery)
Also what should be my next step regarding more mods?
I was thinking spoon exhaust? Furthermore, can anyone reccomend a good high flow exhaust with a removable silencer that is not too much louder than stock.
Any info on exhaust brand pros and cons would be greatly appreciated!!!!
Jansen
I have an Australian delivered ITR,
Need help on Mods...
I have
Apexi Power Fc,. spoon cam gears, cams, valve, valve springs, throttle body, gasket, spark plug, ground wires.
Does anyone have dyno or know of any places as to what power increases I might expect from these ( the car is under surgery)
Also what should be my next step regarding more mods?
I was thinking spoon exhaust? Furthermore, can anyone reccomend a good high flow exhaust with a removable silencer that is not too much louder than stock.
Any info on exhaust brand pros and cons would be greatly appreciated!!!!
Jansen
cherry bomb glass pack will get your best results. I mean custom 2.5 with that and your set!
really the spoon is loud as hell. but if you can stand the noise i hear its a pretty good system. I would just go with a custom 2.5 inch with a magnaflow personally. but to each his own.
really the spoon is loud as hell. but if you can stand the noise i hear its a pretty good system. I would just go with a custom 2.5 inch with a magnaflow personally. but to each his own.
There is another n00b with the exact same location https://honda-tech.com/zerouser?cmd=...e&id=999326963
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post







