Just wanted to see if anyone had pics of their roll bars in their tegs that i could check out?
Prefereably with side bars in so i can see how they clear the seats. I was told i might have quite a bit of trouble getting past my sparco's with the door panels in .

Thanks.

 

There's going to be a significant difference between a roadrace rollbar and a dragrace "rollbar" (i.e., with forward legs as opposed to an Autopower with legs going to the rear shock tower area by the rear speakers). Ed

 

I searched and found this link of turbotyper's car. https://honda-tech.com/zerothread?id=553556

 

thanks .
Ed, road racers dont need side bars?Sorry i dont know too much about them , i knoe i have seen some of the hardercore ones do.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itr206 &raquo;</TD></TR><TR><TD CLASS="quote">thanks .
Ed, road racers dont need side bars?Sorry i dont know too much about them , i knoe i have seen some of the hardercore ones do. </TD></TR></TABLE>

They do need them - search for "rollbar" and "cage" and "harness" for RR/AX forum topics (but dont post a thread asking for pics - there's plenty of pictures already up).

A good cage will not have any interference with the seat in an integra though.

 

search n00b

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itr206 &raquo;</TD></TR><TR><TD CLASS="quote">Ed, road racers dont need side bars? </TD></TR></TABLE>

Side bars (or actually "door bars" in a roadrace rollcage) are different as prescribed by the rules of the governing body.

You'll really need to check the rules since a drag "rollbar" usually requires that the forward door bars go forward from a point somewhere near sholder level on the main hoop to the footwell area, whereas in a roadrace cage there are the upper forward tubes that come down along the A-pillar as well as horizontal "door bars" connecting the main hoop to the a-pillar tube.

Just a start ... Ed.

 

i know how the drag race ones need to go , i just thought RR ones would be semi similar.
Ok thanks. you can close the thread i guess.

 

Or ... have it moved to the Drag Race forum.

 

Well road race cars need different side impact protection than drag cars do - there's a much higher chance of getting t-boned

 

dont worry about it close it . no one has tegs with cages or anytihng in the drag racing forum . just figured id try here.
thanks.

 

Sorry We couldn't help you with that particular problem.
And yeah, I can see how there might be some clearance issues. Ed

 

the autopower 6pt will clear a sliding bucket seat with door panels in.