what chip program w/ vafc for setup
Thread Starter
Honda-Tech Member
Joined: Apr 2002
Posts: 649
Likes: 0
From: South, Florida
what chip program w/ vafc for setup
What chip program would be best for a gsr with intake manifold, itr valvesprings, and skunk stage 1 or itr cams. Havn't decided on the cams yet. What would the best crossover point be for both the cams. I've read the skunk program is good, but it runs rich. Does anyone have any experience with this and using the vafc to lean it out. thanks.
Darth ModerVader
Joined: Jan 2001
Posts: 11,539
Likes: 1
From: Mustafar
Re: what chip program w/ vafc for setup (joek84)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by joek84 »</TD></TR><TR><TD CLASS="quote">What would the best crossover point be for both the cams. I've read the skunk program is good, but it runs rich. Does anyone have any experience with this and using the vafc to lean it out. thanks.</TD></TR></TABLE>
You're going to need a dyno for the best solutions to those questions.
You're going to need a dyno for the best solutions to those questions.
Thread Starter
Honda-Tech Member
Joined: Apr 2002
Posts: 649
Likes: 0
From: South, Florida
Re: what chip program w/ vafc for setup (Padawan)
anyone else have input. I'd ideally wanna run just a chip w/o a vafc. Anyone know a place in florida that can burn obd1 for me with a good price on a dyno. Anyone running just a chip and no vafc on a similar setup to the one i mentioned.
Thread
Thread Starter
Forum
Replies
Last Post
