Does Type 1 Racing make a 2.5" exhaust for the 94-97 GSRs? If not what would I have to do to modify the ITR one to fit?

 

bump


[Modified by Jiz101, 8:42 AM 4/4/2003]

 

there are also different length headers..like the jdm is longer than usdm..
and cat lengths...ask ipsracing.com or something...

 

yes they do make one, check out some of the ht sponsors who are selling them

 

i love my blue tipped exhaust

 

I am only finding axle backs, anyone know where I can find a full catback?

 

/\

 

Try this = IPS Racing

It seems you'd have to get the axle back, then the b-pipe... if that's the case then ouch, that's expensive

 

go to randdmotorsports.com for the full catback

 

http://www.aj-racing.com/ has them too

 

www.randdmotorsports.com has the exhausts listed to be '97-'01, Will these not fit a '95 chassis? What modifying would I have to do in order to fit the exhaust to a '95 GSR. As you can tell I really want the T1R exhaust, thanks for your help

I think the full exhaust on randdmotorsports.com is a Type R only...??


[Modified by Jiz101, 6:46 AM 3/31/2003]

 

/\

 

bump

 

i say jus give rand a call. I'm sure they could help ya out... but if all else fails.. this gives u reason to pick up a new jdm 4-1 n cat hehe...

 

The exhaust will not bolt up because your cat is too short. Just get a proper length carsound cat with a jdm header at the same time

 

that was the money answer

 

if he got the 94-99 t1r cat back wouldnt it bolt right up to his cat.

its the jdm header that wont bolt up to the cat, right?

 

He has a '95 GS-R, so it will be about 4" too short.

 

Sorry, I forgot to mention that I was planning on a JDM (or DC) 4-1 header with 2.5" and a testpipe along with the T1R exhaust, but it sounds like I may have to go with a carsound cat or a custom pipe.

 

so the 94-99 gsr t1r cat back wont fit on his 95 gsr?

 

There is no T1R for GS-R's. They are only made to "bolt-on" to ITR's. Of course GS-R owners simply just have to run a JDM header and a proper length 2.5" cat. Which is logical considering the T1R is ~63.5mm=2.5". IMHO, a bit too big for a bolt-on's only GS-R, or one running a USDM header/2.25" cat combo. Running a JDM header and full 2.5" exhaust is more suitable when you upgrade to cams such as ITR cams.


[Modified by 96dc2, 10:46 PM 4/3/2003]


[Modified by 96dc2, 10:47 PM 4/3/2003]

 

http://ipsracing.com/engine/exhaust/..._axleback.html

am i the only one that see's a 94-99 gsr app on that page?

or am i smoking crack?

 

Actually there is. You can get the 94-99 GSR Bpipe and use a dc2 axle back.

 

on me guys. Thanks for the correction.

 

dont worry your not the only 1 in this thread that was wrong