I just recently installed a start button in my integra. I wanted to instal a toggle switch that goes inbetween the 12v source and the relay. I bought a 30a toggle switch with the led and it has three prongs. it has power, load, and ground. I have a few questions:

1. what is the load?
2. does the 12v power go to power and a wire from load go to the relay?

any help is appreciated

 

i would believe that load is like "out" as if power was "in"

 

Yes, thats true the "load" is the power out, and the line "power" is the 12v power to the switch. Compared to a switch in a house the power is the 120v from the breaker, and the "load" is the wire going to the light.