Need help with wireing
Thread Starter
Joined: Mar 2004
Posts: 284
Likes: 0
From: okc, ok
Need help with wireing
I am doing an OBD-0 to OBD-1 conversion and there are a few wires I am having trouble identifying. The engine is an 95 B18C.
There is a plug on the back of the engine with two wires one blue and one black with a yellow stripe.
There is a large rubber boot looking thing with two wires in it yellow with a green stripe and a black wire.
Lastly there are two wires red with a yellow stripe and green with a white stripe right now these are run to an rpm switch for secondary butterflies. But I heard from a reliable source that these wires are not for the secondaries.
There is a plug on the back of the engine with two wires one blue and one black with a yellow stripe.
There is a large rubber boot looking thing with two wires in it yellow with a green stripe and a black wire.
Lastly there are two wires red with a yellow stripe and green with a white stripe right now these are run to an rpm switch for secondary butterflies. But I heard from a reliable source that these wires are not for the secondaries.
Thread
Thread Starter
Forum
Replies
Last Post
hatchinprogress
Honda CRX / EF Civic (1988 - 1991)
5
Jan 15, 2006 07:42 AM