Is it possable for me to install a OEM JDM ITR header on my 92 gsr?

 

yes it will bolt up to the head just fine...the minor detail is will the length & size(2.5in out) bolt up to ur existing cat/exhaust

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LoseRPunKx182 &raquo;</TD></TR><TR><TD CLASS="quote">yes it will bolt up to the head just fine...the minor detail is will the length & size(2.5in out) bolt up to ur existing cat/exhaust</TD></TR></TABLE>
+1. a muffler shop can take care that problem for you for like $50

 

you're also going to have to cut some of your cross member for clearance. and then the collecter is going to have to be modded to fit.

 

actually if u are not worried about emissions an adjustable test pipe for a 2.5 collector would be a simple solution.

 

anybody have pics, what about if i have a traction bar?

 

if you have an after market crossmember it'll be fine, because the aftermarket one is smaller and will clear the header

 

tried this when i swapped my 93 da. i decided to look for another solution bc it hit my crossmember and i dont like the idea of notching it.