Could someone tell me what years interchange with what exterior parts on an Integra?

 

94-97 98-01 on the 3g's i dont know about older tegs

 

Generation years are as follows:
86-89 Gen I
90-93 Gen II
94-01 Gen III


90-91 and 92-93 with the gen 2's
94-97 and 98-01 with the gen 3's

 

so if you were to change the front end to a jdm front, you would need to find a 94-97 if you had a 96 or could you get a 98-01 to fit?

Excuse my stupidity... I have had civic's for 2-3 years and never really paid too much attention to integras.

 

you have to put a new rad support in for the jdm front. all 94-01 tegs can be swapped in and out, the 94-97 comes w/ one front, the 98+ have a differnt front, different tails, and different rear. JDM tegs have had the circle headlights. in 93.5 and 94 they had the si-vtec that had the circles. its my favorite front end for DC tegs (the si-vtec).

as for the other gens: 86-87 had one style front, 88-89 had another, and can be swapped back and forth. but i'm not sure on what else

the 90-91 had 1 style, the 92-93 had the other. those can go back and forth. only the front bumper, taillights, and steering wheel, and wheels were different between the looks of these.

 

Thanks for the complete reply.

So you can put an 01 jdm front on a 96? just the different years = different style of bumper?

 

^yup, correct