Front end conversion
Thread Starter
Joined: Jan 2003
Posts: 2
Likes: 0
From: Burlington, Ont, Canada
Front end conversion
i have a few questions
1. is there a jdm front end conversion you can do on the 90-93 teg (other then 1 pc headlights)?
2. if not how hard is it to do the 90-91 to 92 93 front bumper?(process if possible)
3. and finally is there any nice looking lips you can get for the 92 93 front bumper?
1. is there a jdm front end conversion you can do on the 90-93 teg (other then 1 pc headlights)?
2. if not how hard is it to do the 90-91 to 92 93 front bumper?(process if possible)
3. and finally is there any nice looking lips you can get for the 92 93 front bumper?
Joined: Oct 2002
Posts: 56
Likes: 0
From: Seattle
Re: Front end conversion (BK_teg)
Try poking around at http://www.g2ic.com
That's a site dedicated to gen 2 DA's
Besides getting the 1 pcs. You can also get a JDM front bumper reinforcement. Not cosmetically noticeable but it only weighs approx 3.5 lbs which is a lot less than the USDM reinforcements. The JDM bumpers are basically the same, I have an extra one at my house and you can have it for free if you live in Seattle.
The 92-93 bumper conv. isn't too involved and can be done easily within a few hours.
A popular lip for the 92 bumpers is the Wings West RS lip.
HTH
Kevin
That's a site dedicated to gen 2 DA's
Besides getting the 1 pcs. You can also get a JDM front bumper reinforcement. Not cosmetically noticeable but it only weighs approx 3.5 lbs which is a lot less than the USDM reinforcements. The JDM bumpers are basically the same, I have an extra one at my house and you can have it for free if you live in Seattle.
The 92-93 bumper conv. isn't too involved and can be done easily within a few hours.
A popular lip for the 92 bumpers is the Wings West RS lip.
HTH
Kevin
Thread
Thread Starter
Forum
Replies
Last Post