Okay guys i got a first generation b16a and i bought a b20b. So I put on the head and there is an open hole on left side looking at the motor, which is passenger side. The opening is on the bottom-back of head there isn't anything blocking it so oil just comes out help please.!

 

check the how to ls/vtec thread.

 

when you finally have it all together. don't make anything too hard to get at. if you put a vtec head on a stock b20 bottom end it won't be long before your time bomb is in pieces and you'll be pulling it out again.

 

i did many many times i still havn't found the problem yet.

 

here's the link.

Great information

https://honda-tech.com/forums/all-motor-naturally-aspirated-44/how-build-%22reliable%22-lsvtec-b20vtec-1676914/

Take a picture of what you are talking about, easier to help you with.

 

haha that's a good idea i will do that and i seen that post so many times already its not even funny.