B00sted AWD Wagon lives :)
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
B00sted AWD Wagon lives :)
This lil doo-hicky below is one of the BEST things for a simple setup. LIke $5 from PetSmart, looks half blingin and works ****** AWESOME for T-ing things out. Its similar to a vaccum manifold, except you just flip the lever, and you can open/close a vac. line. Ive used them as boost controllers as well 1 lever open usually = 1psi increase
I said SIMPLE setups, Im not sure I would trust it about 5-6 psi.
OH ya, on the wagon, what else can I say? Its fun as hell! lol
Took around an hour to toss everything on, some sort of exhaust will be made whenever I have time again. I wouldve made a manifold for myself, but this was already done, and $ is tight because of whats in the background of the first few pictures.
Original engine, 220k miles. Barely smokes, but definately hauls ***...lol. 3 psi below 5k rpm, after that, it creeps to 5. Perfect!
Modified by Tinker219 at 9:42 AM 11/17/2003
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: B00sted AWD Wagon lives :) (VTC_CiViC)
I want to find a CLEAN one. Stock block D series, maybe internals. 10-12 psi, sleeper from hell. If it blows, more than likely swap the bare block, use the same internals, rebuild it, and go at it again! Ive got 6 D series blocks in my garage, all in good condition
#5
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: B00sted AWD Wagon lives :) (itr206)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itr206 »</TD></TR><TR><TD CLASS="quote">i like the bunjee strapped boost gauge, pimp </TD></TR></TABLE>
Its the only way to fly on a "homemadeturbo.com"-style setup
Its the only way to fly on a "homemadeturbo.com"-style setup
#6
at the jetties fishin'
Re: B00sted AWD Wagon lives :) (Tinker219)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tinker219 »</TD></TR><TR><TD CLASS="quote">
Its the only way to fly on a "homemadeturbo.com"-style setup </TD></TR></TABLE>
true dat.
you sure the body on thing will hold together?? LoL, looks like the rocker panel is ready to just fall off any time from the rust
isn't the drivetrain able to be swapped over to the 4-doors of the same years??
Its the only way to fly on a "homemadeturbo.com"-style setup </TD></TR></TABLE>
true dat.
you sure the body on thing will hold together?? LoL, looks like the rocker panel is ready to just fall off any time from the rust
isn't the drivetrain able to be swapped over to the 4-doors of the same years??
Trending Topics
#9
Junior Member
Join Date: Oct 2002
Location: The Burbs, IL, USA
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
Re: B00sted AWD Wagon lives :) (Tinker219)
Sweet yO! That boost gauge is mad tite! jp. You must have so much fun with all your projects tho. Lucky bastard!
#12
Honda-Tech Member
Join Date: Aug 2002
Location: ashEVILle, NC, USSR
Posts: 4,417
Likes: 0
Received 0 Likes
on
0 Posts
Re: B00sted AWD Wagon lives :) (Sohc Driver)
I require footage of that thing flinging mud *everywhere*
My boy Dave has the same valve-actuated vacuum tee on his Merkur. It really does look pretty sweet.
My boy Dave has the same valve-actuated vacuum tee on his Merkur. It really does look pretty sweet.
#15
Honda-Tech Member
Join Date: Jun 2001
Location: Northern, VA
Posts: 7,261
Likes: 0
Received 0 Likes
on
0 Posts
Re: B00sted AWD Wagon lives :) (Mase)
Too much time on your hands Cody, no wonder there is a 6-8 week wait on the manifolds
Now get to work on my manifold
Now get to work on my manifold
#17
Honda-Tech Member
Re: B00sted AWD Wagon lives :) (Tinker219)
hahaha...wow dude! that's so cool!
I thought you were going to use a bosch BOV? From the pic it looks like an XS.
I thought you were going to use a bosch BOV? From the pic it looks like an XS.
#19
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: B00sted AWD Wagon lives :) (Bryson)
I dont have any time on my hands, it only took me an hour out of my saturday afternoon. I worked till 10pm that night instead of 9
There will be a video of it soon, I think I want to wait until I see some snow first, THEN the fun starts...lol.
THe BOV was a bosch, but i blew the diaphram out, and it was leaking boost/not working, so I stole the del sols BOV for now. I like it better anyway, just a smooth "Whooooooosh". No whistles, no drama, just a release of air
Somethings messed up in the pass. rear wheel.
If Im on a dirt road, and hit a succession of washer-board bumps, it literally LOCKS up. It sent me into the ditch yesturday at around 45mph on the way back from the post office(yes theres a dirt road going to the post office ). Anybody have any clue what could be causing this? Its easy to duplicate, but Im stumped on what it could be...
There will be a video of it soon, I think I want to wait until I see some snow first, THEN the fun starts...lol.
THe BOV was a bosch, but i blew the diaphram out, and it was leaking boost/not working, so I stole the del sols BOV for now. I like it better anyway, just a smooth "Whooooooosh". No whistles, no drama, just a release of air
Somethings messed up in the pass. rear wheel.
If Im on a dirt road, and hit a succession of washer-board bumps, it literally LOCKS up. It sent me into the ditch yesturday at around 45mph on the way back from the post office(yes theres a dirt road going to the post office ). Anybody have any clue what could be causing this? Its easy to duplicate, but Im stumped on what it could be...
#22
Honda-Tech Member
Join Date: Sep 2002
Location: Beavercreek, OH 45431
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
Re: B00sted AWD Wagon lives :) (eli_vang)
Two questions.... What's the fuel management, and what turbo is that?
Also, actually, is it non-intercooled (it looks like it isn't)??
I wanna see 10 lbs!!!!
Also, actually, is it non-intercooled (it looks like it isn't)??
I wanna see 10 lbs!!!!
#23
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: B00sted AWD Wagon lives :) (Johnyquest)
i wanna see this thing run till march, so 3 psi it is. FMU, KISS setup. Plugs are reading beautifully. I retarded the timing manually, so thatll help longivity too.
yes it was non-ICd in that pic, but I jsut got done tossing a SAAB IC in the midst. That made a HUGE difference, even though its still int he engine bay. It actually puts your *** in the seat! Well, lunch is over, back to welding
yes it was non-ICd in that pic, but I jsut got done tossing a SAAB IC in the midst. That made a HUGE difference, even though its still int he engine bay. It actually puts your *** in the seat! Well, lunch is over, back to welding
#25
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: B00sted AWD Wagon lives :) (liam821)
shitty, I was going to take some pics of the IC, but Imagestation deactivated my account Maybe because I had 26 pages of pictures? All were in "good taste". I guess its time to learn how to host through my website