EK sideskirts fit EF's?????
#1
Thread Starter
Join Date: Aug 2002
Location: Grand Canyon, state
Posts: 1,742
Likes: 0
Received 0 Likes
on
0 Posts
EK sideskirts fit EF's?????
Will Ek sideskirts on EF's?? Has anyone done it, and i'm sure there is a little modification??? Please help. Pics will be greatly apprectiated.
#6
Honda-Tech Member
Join Date: Jul 2002
Location: 9/11/01 WTC Never Forget, United States Of America
Posts: 6,487
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sideskirts fit EF's????? (projecthybrid04)
here you go my ef with ek skirts
and here is how to do it:
Accessories:
1. EK skirts
2. Small rubber hammer
3. Drill
4. Self tap screws
5. Goop automobile glue or (double sided tape if you live in tropical weather not recomended if you live in cold weather)
6. Hand saw/dremel
Step by step:
1. Knock off inside mounts on the skirts (rubber hamer)
2. Lift up car take off front tires.
3. Measure skirts
4. Cut skirts to size.
5.Grind down the upper part of the skirts that goes on the door sill cause they will not let the doors close properly do this until the doors close, it will take sometime
6. Glue or double side tape skirts onto door sill.
7. Drill in self tap screws through bottom of skirts and car frame.
8. Drill screws into rear part of the skirt and wheel well.
9. Put tires back on lower car and you have a new look.................Enjoy
and here is how to do it:
Accessories:
1. EK skirts
2. Small rubber hammer
3. Drill
4. Self tap screws
5. Goop automobile glue or (double sided tape if you live in tropical weather not recomended if you live in cold weather)
6. Hand saw/dremel
Step by step:
1. Knock off inside mounts on the skirts (rubber hamer)
2. Lift up car take off front tires.
3. Measure skirts
4. Cut skirts to size.
5.Grind down the upper part of the skirts that goes on the door sill cause they will not let the doors close properly do this until the doors close, it will take sometime
6. Glue or double side tape skirts onto door sill.
7. Drill in self tap screws through bottom of skirts and car frame.
8. Drill screws into rear part of the skirt and wheel well.
9. Put tires back on lower car and you have a new look.................Enjoy
Trending Topics
#8
Join Date: Oct 2002
Location: mississauga, on, canada
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sideskirts fit EF's????? (MR.RED'89)
do you have any more pics of your car showing the skirts? close ups?
here you go my ef with ek skirts
and here is how to do it:
Accessories:
1. EK skirts
2. Small rubber hammer
3. Drill
4. Self tap screws
5. Goop automobile glue or (double sided tape if you live in tropical weather not recomended if you live in cold weather)
6. Hand saw/dremel
Step by step:
1. Knock off inside mounts on the skirts (rubber hamer)
2. Lift up car take off front tires.
3. Measure skirts
4. Cut skirts to size.
5.Grind down the upper part of the skirts that goes on the door sill cause they will not let the doors close properly do this until the doors close, it will take sometime
6. Glue or double side tape skirts onto door sill.
7. Drill in self tap screws through bottom of skirts and car frame.
8. Drill screws into rear part of the skirt and wheel well.
9. Put tires back on lower car and you have a new look.................Enjoy
and here is how to do it:
Accessories:
1. EK skirts
2. Small rubber hammer
3. Drill
4. Self tap screws
5. Goop automobile glue or (double sided tape if you live in tropical weather not recomended if you live in cold weather)
6. Hand saw/dremel
Step by step:
1. Knock off inside mounts on the skirts (rubber hamer)
2. Lift up car take off front tires.
3. Measure skirts
4. Cut skirts to size.
5.Grind down the upper part of the skirts that goes on the door sill cause they will not let the doors close properly do this until the doors close, it will take sometime
6. Glue or double side tape skirts onto door sill.
7. Drill in self tap screws through bottom of skirts and car frame.
8. Drill screws into rear part of the skirt and wheel well.
9. Put tires back on lower car and you have a new look.................Enjoy
#11
Honda-Tech Member
Re: EK sideskirts fit EF's????? (irtep)
NIIICE!! I'm looking to do this to my EG........
Merv, want my EG sides..hahaha...wel I'm off gotta go find me some ek sides...lol
Merv, want my EG sides..hahaha...wel I'm off gotta go find me some ek sides...lol
#12
Honda-Tech Member
Join Date: Nov 2002
Location: GA
Posts: 6,725
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sideskirts fit EF's????? (irtep)
yeah lets see some close ups w/that at the front of the car, where the skirts meet the front fender wells and where you gotta mod it for the door to open. good mod on the skirts, when its hard to find any (that aren't ricey) for an ef.
#14
Honda-Tech Member
Re: EK sideskirts fit EF's????? (ind3ciso)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ind3ciso »</TD></TR><TR><TD CLASS="quote">sorry to bring this back up but are the skirts off a ek coupe or a hatch?
</TD></TR></TABLE>
EK Coupe/Hatch are the same............sedan are different....
</TD></TR></TABLE>
EK Coupe/Hatch are the same............sedan are different....
#17
Join Date: Oct 2003
Location: San Francisco, CA, The Machine
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sideskirts fit EF's????? (SloCivicHMM)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SloCivicHMM »</TD></TR><TR><TD CLASS="quote">NIIICE[/URL]!! I'm looking to do this to my EG........
Merv, want my EG sides..hahaha...wel I'm off gotta go find me some ek sides...lol</TD></TR></TABLE>
there was a post about this in the EG+ fourm yesterday! lol
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D16z6turbs »</TD></TR><TR><TD CLASS="quote">it doesnt seem right on an EF but it looks good</TD></TR></TABLE>
and no, it doesn't seem right... it looks good on EGs and EKs, but those cars are more round. The EF is very squareish looking so it kind of kills the drill.
Merv, want my EG sides..hahaha...wel I'm off gotta go find me some ek sides...lol</TD></TR></TABLE>
there was a post about this in the EG+ fourm yesterday! lol
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D16z6turbs »</TD></TR><TR><TD CLASS="quote">it doesnt seem right on an EF but it looks good</TD></TR></TABLE>
and no, it doesn't seem right... it looks good on EGs and EKs, but those cars are more round. The EF is very squareish looking so it kind of kills the drill.
Thread
Thread Starter
Forum
Replies
Last Post