Jonyb's RHD ITR swapped Integra for sale again!! HCI and Tunerzine featured!! Paducah, KY
04-03-2005 | 12:45 PM
#1
Thread Starter
Honda-Tech Member
Joined: Dec 2002
Posts: 4,454
Likes: 0
From: Paducah, KY, USA
Jonyb's RHD ITR swapped Integra for sale again!! HCI and Tunerzine featured!!
Lowered Price: $15K
This car is officially for sale. Don't ask why I'm selling, please
Updated with 16" Enkei J-Speed III's, black Bride Brix I seats, and Mugen Edition Takata harnesses. I have it priced at $17K. All of the JDM ITR parts came from a JDM ITR half cut, and I have most of the receipts for the parts on the car, and I do have it for the front clip. The car has been complete for one year, and I built it from start to finish. The interior is stripped, has a 4-point bar, and the entire inside is painted to match the outside. Engine bay is also as slick as the outside.
Featured in September issue of Super Street, April issue in HCI, and tunerzine volume 1. Two magazine features, and one web feature.
The main parts:
JDM ITR complete swap
4.7 ITR LSD tranny
OEM ITR front clip
5-lug ITR front and rear
Apexi WS coilovers
Brembo X-drilled/slotted rotors, PBR pads, stainless lines
Comptech exhaust
10 gallon fuel cell, external fuel pump, Earl's filter, AEM rail and FPR
NGK wires, Bosch plugs, Fal fans, energy sus motor mount inserts
ACT 6 puck clutch, ACT heavy duty pressure plate
Vision mirrors
Momo Tuner, NRG quick release
16" Enkei J-Speed III wheels white/polished lip --> ULTRA RARE!!
Yokohama Parada Spec II tires
Bride Brix I seats
Bride seat brackets
Mugen Edition Takata 4-point harnesses
4-point roll bar
And MUCH MORE
Condition:
Paint is flawless. The bumpers are painted correctly (brake ducts blacked out), unlike they are in teh pics. Window moldings are now installed. No dents, dings, or scratches.
The motor runs awesome!! No running problems at all. Teh clutch is very strong. The motor pulls very hard. It's been driven for almost one year now with only one problem, and that was the fuel pump. No problems since then.
This car is registered and licensed in KY. It's titled as a 99 GSR. The cluster shows 78,000 Kilometers, and its the original cluster that came with the clip. Please don't ask me how I did the conversion, or how to do it yourself. I'll give SERIOUS buyers the details on how I did the conversion. I don't know if it'll pass smog. I will say that it has the factory catalytic converter and header, so maybe. I don't know about registering it in other states, you'll have to find that out on your own.
NO FLAKERS!! I won't consider it sold until I have a deposit, or cash in hand.
Old pics, same paint
Modified by jonyb at 8:53 PM 6/13/2005
Modified by jonyb at 10:49 AM 7/12/2005
Modified by jonyb at 5:45 PM 8/10/2005
This car is officially for sale. Don't ask why I'm selling, please
Updated with 16" Enkei J-Speed III's, black Bride Brix I seats, and Mugen Edition Takata harnesses. I have it priced at $17K. All of the JDM ITR parts came from a JDM ITR half cut, and I have most of the receipts for the parts on the car, and I do have it for the front clip. The car has been complete for one year, and I built it from start to finish. The interior is stripped, has a 4-point bar, and the entire inside is painted to match the outside. Engine bay is also as slick as the outside. Featured in September issue of Super Street, April issue in HCI, and tunerzine volume 1. Two magazine features, and one web feature.
The main parts:
JDM ITR complete swap
4.7 ITR LSD tranny
OEM ITR front clip
5-lug ITR front and rear
Apexi WS coilovers
Brembo X-drilled/slotted rotors, PBR pads, stainless lines
Comptech exhaust
10 gallon fuel cell, external fuel pump, Earl's filter, AEM rail and FPR
NGK wires, Bosch plugs, Fal fans, energy sus motor mount inserts
ACT 6 puck clutch, ACT heavy duty pressure plate
Vision mirrors
Momo Tuner, NRG quick release
16" Enkei J-Speed III wheels white/polished lip --> ULTRA RARE!!
Yokohama Parada Spec II tires
Bride Brix I seats
Bride seat brackets
Mugen Edition Takata 4-point harnesses
4-point roll bar
And MUCH MORE
Condition:
Paint is flawless. The bumpers are painted correctly (brake ducts blacked out), unlike they are in teh pics. Window moldings are now installed. No dents, dings, or scratches.
The motor runs awesome!! No running problems at all. Teh clutch is very strong. The motor pulls very hard. It's been driven for almost one year now with only one problem, and that was the fuel pump. No problems since then.
This car is registered and licensed in KY. It's titled as a 99 GSR. The cluster shows 78,000 Kilometers, and its the original cluster that came with the clip. Please don't ask me how I did the conversion, or how to do it yourself. I'll give SERIOUS buyers the details on how I did the conversion. I don't know if it'll pass smog. I will say that it has the factory catalytic converter and header, so maybe. I don't know about registering it in other states, you'll have to find that out on your own.
NO FLAKERS!! I won't consider it sold until I have a deposit, or cash in hand.
Old pics, same paint
Modified by jonyb at 8:53 PM 6/13/2005
Modified by jonyb at 10:49 AM 7/12/2005
Modified by jonyb at 5:45 PM 8/10/2005
Trending Topics
04-03-2005 | 04:56 PM
#8
Thread Starter
Honda-Tech Member
Joined: Dec 2002
Posts: 4,454
Likes: 0
From: Paducah, KY, USA
Re: Jonyb's RHD ITR swapped Integra for sale again!! HCI and Tunerzine featured!! (knotty_dread)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by knotty_dread »</TD></TR><TR><TD CLASS="quote">Bump, I almost owned this car once. Funny thing is im looking for a teg again.</TD></TR></TABLE>
UH OOOOHHH
UH OOOOHHH
04-04-2005 | 04:31 AM
#11
Thread Starter
Honda-Tech Member
Joined: Dec 2002
Posts: 4,454
Likes: 0
From: Paducah, KY, USA
Re: Jonyb's RHD ITR swapped Integra for sale again!! HCI and Tunerzine featured!! (Swags04)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Swags04 »</TD></TR><TR><TD CLASS="quote">..got a downpayment on my car </TD></TR></TABLE>
Sweet
</TD></TR></TABLE>Sweet
04-04-2005 | 11:45 AM
#15
Thread Starter
Honda-Tech Member
Joined: Dec 2002
Posts: 4,454
Likes: 0
From: Paducah, KY, USA
Re: (nsxmatt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxmatt »</TD></TR><TR><TD CLASS="quote">Give to me.
The end.
</TD></TR></TABLE>
Only if you promise to make it as fast as yours
The end.
</TD></TR></TABLE>Only if you promise to make it as fast as yours
04-04-2005 | 03:59 PM
#17
Thread Starter
Honda-Tech Member
Joined: Dec 2002
Posts: 4,454
Likes: 0
From: Paducah, KY, USA
Re: (nsxmatt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxmatt »</TD></TR><TR><TD CLASS="quote">Deal!</TD></TR></TABLE>
04-05-2005 | 07:56 AM
#24
Honda-Tech Member
Joined: Dec 2004
Posts: 1,040
Likes: 0
From: dearborn, Michigan, USA
Re: Jonyb's RHD ITR swapped Integra for sale again!! HCI and Tunerzine featured!! (Reaction)
your sellin it!!!
that thing is SICK man, I hope the new owner will appreciate it as much as you did... BUMP
that thing is SICK man, I hope the new owner will appreciate it as much as you did...
BUMP