Not your average SSAC thread
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Jacksonville, FL
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
Not your average SSAC thread
So I was searching around a little bit ago and i came across some people wanting SSAutochromes number. Recently I just bought a new manifold from them and when I checked out through paypal it gave me this number: 800-957-0644
I know a lot of people want to call and bitch there people so i figured i would help out. The number is labeled in paypal as Objective Furnishing but it SSAC's the lady that runs SSAC name is Tonya..
I know a lot of people want to call and bitch there people so i figured i would help out. The number is labeled in paypal as Objective Furnishing but it SSAC's the lady that runs SSAC name is Tonya..
#5
Re: Not your average SSAC thread (Ep1dem1c)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ep1dem1c »</TD></TR><TR><TD CLASS="quote">So I was searching around a little bit ago and i came across some people wanting SSAutochromes number. Recently I just bought a new manifold from them and when I checked out through paypal it gave me this number: 800-957-0644
I know a lot of people want to call and bitch there people so i figured i would help out. The number is labeled in paypal as Objective Furnishing but it SSAC's the lady that runs SSAC name is Tonya..
</TD></TR></TABLE>
unless the owner had a sex change (which is possible i guess) tonya does not run SSAC
I know a lot of people want to call and bitch there people so i figured i would help out. The number is labeled in paypal as Objective Furnishing but it SSAC's the lady that runs SSAC name is Tonya..
</TD></TR></TABLE>
unless the owner had a sex change (which is possible i guess) tonya does not run SSAC
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2002
Location: ashEVILle, NC, USSR
Posts: 4,417
Likes: 0
Received 0 Likes
on
0 Posts
Re: Not your average SSAC thread (Boostedb20EH2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostedb20EH2 »</TD></TR><TR><TD CLASS="quote">355whp on a ssac manifold and 0 problems.</TD></TR></TABLE>
Multiple cars I couldn't finish tuning before the manifold had cracked or the turbo was passing oil - all problems.
Don't let one good experience make you think that manifold isn't a complete piece of ****. Some people have good experiences with Cavaliers, you know, and think those are good cars.
Multiple cars I couldn't finish tuning before the manifold had cracked or the turbo was passing oil - all problems.
Don't let one good experience make you think that manifold isn't a complete piece of ****. Some people have good experiences with Cavaliers, you know, and think those are good cars.
#9
Honda-Tech Member
Thread Starter
Join Date: Apr 2007
Location: Jacksonville, FL
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
Re: Not your average SSAC thread (Joseph Davis)
ive had nothing but good experiences with SSAC i was just posting the number because a lot of people couldnt find it or they requested it...
#11
Honda-Tech Member
Join Date: Aug 2002
Location: ashEVILle, NC, USSR
Posts: 4,417
Likes: 0
Received 0 Likes
on
0 Posts
Re: Not your average SSAC thread (Ep1dem1c)
So you've had one or two experiences whereas I am inundated with their crap?
Great cheap BOVs, v-bands, and ICs for the budget minded with low to mid-power builds... beyond that you should just give your money to toothless crackwhores, you'd get more for it.
Great cheap BOVs, v-bands, and ICs for the budget minded with low to mid-power builds... beyond that you should just give your money to toothless crackwhores, you'd get more for it.
#13
Re: Not your average SSAC thread (SinisterStrikesAgain)
I can picture it now.... the manifold cracks, wastegate wont hold boost even before it breaks off just below the flange, fortunately the intercooler has enough pressure drop that the boost spike before the gate fell off is minimized, center section being such a precisely manufactured piece eats those high quality bearings when overspun, balance nut on compressor side backs off/ destroys the wheel just as the housing cracks into 2 pieces... all just moments before your engine decides to commit suicide to save itself from its 2nd dyno pass.
Gives me a warm fuzzy feeling...... wait..... nevermind, that was just some vomit coming up in my mouth a little.
Modified by twkdCD595 at 12:32 PM 7/13/2007
Gives me a warm fuzzy feeling...... wait..... nevermind, that was just some vomit coming up in my mouth a little.
Modified by twkdCD595 at 12:32 PM 7/13/2007
#15
Re: (zex_cool)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zex_cool »</TD></TR><TR><TD CLASS="quote">why bitch ?? SSAC FTW in my book !!!</TD></TR></TABLE>
Hey SCAMMER, why don't you give the guy his money back that you've been holding on to for 8 months?
Hey SCAMMER, why don't you give the guy his money back that you've been holding on to for 8 months?
#17
Honda-Tech Member
Join Date: Aug 2002
Location: ashEVILle, NC, USSR
Posts: 4,417
Likes: 0
Received 0 Likes
on
0 Posts
Re: Not your average SSAC thread (DfwBB6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DfwBB6 »</TD></TR><TR><TD CLASS="quote">turned out to be the subaverage SSAC thread.......after all </TD></TR></TABLE>
+1
+1
#18
Re: Not your average SSAC thread (twkdCD595)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by twkdCD595 »</TD></TR><TR><TD CLASS="quote">I can picture it now.... the manifold cracks, wastegate wont hold boost even before it breaks off just below the flange, fortunately the intercooler has enough pressure drop that the boost spike before the gate fell off is minimized, center section being such a precisely manufactured piece eats those high quality bearings when overspun, balance nut on compressor side backs off/ destroys the wheel just as the housing cracks into 2 pieces... all just moments before your engine decides to commit suicide to save itself from its 2nd dyno pass.
Gives me a warm fuzzy feeling...... wait..... nevermind, that was just some vomit coming up in my mouth a little.
yes because boost uaually spikes when a wastegate falls of manifold
Modified by twkdCD595 at 12:32 PM 7/13/2007</TD></TR></TABLE>
Gives me a warm fuzzy feeling...... wait..... nevermind, that was just some vomit coming up in my mouth a little.
yes because boost uaually spikes when a wastegate falls of manifold
Modified by twkdCD595 at 12:32 PM 7/13/2007</TD></TR></TABLE>
#19
Honda-Tech Member
Re: (zex_cool)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zex_cool »</TD></TR><TR><TD CLASS="quote">why bitch ?? SSAC FTW in my book !!!</TD></TR></TABLE>
Stealing peoples money FTW in your book too scammer.
Stealing peoples money FTW in your book too scammer.
#21
Re: Not your average SSAC thread (CoreyR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CoreyR »</TD></TR><TR><TD CLASS="quote">yes because boost uaually spikes when a wastegate falls of manifold </TD></TR></TABLE>
Your reading comprehension is outstanding... I am truely in awe...
Try reading it through 1 more time though Mr. Einstein.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by twkdCD595 »</TD></TR><TR><TD CLASS="quote">I can picture it now.... the manifold cracks, wastegate wont hold boost even before it breaks off just below the flange, fortunately the intercooler has enough pressure drop that the boost spike before the gate fell off is minimized.......</TD></TR></TABLE>
This thread is definately subaverage and has AIDS... which is completely normal with anything SSAC or even the mere mention of it.
Your reading comprehension is outstanding... I am truely in awe...
Try reading it through 1 more time though Mr. Einstein.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by twkdCD595 »</TD></TR><TR><TD CLASS="quote">I can picture it now.... the manifold cracks, wastegate wont hold boost even before it breaks off just below the flange, fortunately the intercooler has enough pressure drop that the boost spike before the gate fell off is minimized.......</TD></TR></TABLE>
This thread is definately subaverage and has AIDS... which is completely normal with anything SSAC or even the mere mention of it.
#24
Re: Not your average SSAC thread (agrn93ls)
everyone has AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS AIDS........AIDS
man thats a good movie.......and this thread still sucks
man thats a good movie.......and this thread still sucks
#25
Re: Not your average SSAC thread (twkdCD595)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by twkdCD595 »</TD></TR><TR><TD CLASS="quote">
Your reading comprehension is outstanding... I am truely in awe...
Try reading it through 1 more time though Mr. Einstein.
This thread is definately subaverage and has AIDS... which is completely normal with anything SSAC or even the mere mention of it.
</TD></TR></TABLE>
oops.
Your reading comprehension is outstanding... I am truely in awe...
Try reading it through 1 more time though Mr. Einstein.
This thread is definately subaverage and has AIDS... which is completely normal with anything SSAC or even the mere mention of it.
</TD></TR></TABLE>
oops.