Progress Technology

Hey guys and gals, this is Joey over at Progress Technology testing the waters here at Honda-Tech.com! I just wanted to let you know that we are currently running a special on all of our Honda spherical bearing kits. As of right now this special is set to expire at the end of June so you better act quick!

P/N: 18.1000 - $129.50 - Front lower control arm pivots for 88-91 Civic/CRX
P/N: 18.1001 - $150.50 - Front radius rod pivots for 88-91 Civic/CRX
P/N: 18.1002 - $129.50 - Rear lower control arm pivots 89-95 Civic/CRX ***Note: Requires two kits to get all four attachment points! These will work with the 1988 Civic/CRX only if you swap to 89+ rear lower arms.
P/N: 18.1003 - $150.50 - Front lower control arm pivots 92-95 Civic

These zero deflection bearing kits will do wonders for a serious track car as they allow the suspension geometry to remain consistant under load. I would not recommend these parts for a daily driver unless you are comfortable with a substantial increase in NVH.

-Joey

Progress Technology

Bump... no racecars here?

JW racing

Great stuff, I have been using Progress bearings front and rear for a while with no issue.

Dren

I will be all over these once I finish paying for my roll cage.

JDM_CD7

iTrader: (1)

Id be all over it if you carried some for Accord/Prelude

Ekasey

Great stuff from the progress boys!

smokin rubber

X2

do you know if the radius rod bearings for the crx would work on the accords?

Progress Technology

We've never looked at the Accords or Preludes for the radius rod kits. Maybe as the demand increases we can change that in the future.

We can make them work for a DA Integra though.

ExospeedAMcrx

I got a bunch of these to stock on the shelf about 7-8 years ago. Put them on a couple of my race cars and they worked real well. I like em!

Progress Technology

Bump.

Crx Jimmy

just bought a set off your website for my crx ( radius rod pivots)

Progress Technology

Thanks for the order! That should be shipping by the end of the week.

Progress Technology

Bump. Just about to ship the next batch of kits out. Sorry for the delays.

TheSauceSpot

Using the crx front LCA bearings.. You should make some RTA bearings for a CRX , the PCI ones dont fit on a crx w/discs like they say. found out the hard way.

o-man

Don't mean to jack thread. I installed the gen.2 ones on my 90 CRX Si with no issues what so ever.

Back OT. Progress makes good stuff

Progress Technology

Bump. Still have a good amount of these in stock and ready to go!

prkiller

Been using these on the CRX's I run and maintain for the last 3 years.
Awesome stuff!
Anyone going with these will be thoroughly impressed!

rallyeman

So is this price for both front arms or i will need two kits?

Progress Technology

That is the price for both front arms. For the rear (P/N 18.1002) you will need 2 kits if you want to do all 4 mounts.

Progress Technology

Bump.

Progress Technology

Still got em!

Progress Technology

Bump.

jin4g63

do you guys have rear sway bars for 94 accord

Progress Technology

Yep, and they are good in stock.

http://www.progressauto.com/products/productID/442