axelintegra

Hello everyone I just picked up a set of racing hart cybers. So far I cleaned them and put them in my garage but will be putting them on soon. Well I am up at school and do all of my part ordering during the week when im here and need to get some lugnuts but I do not know what style they require.

Does anyone know what it would be?

PreyStayShun

This what the wheel looks like?


I ran across a similar thread via Google search and this guy was using typical "tuner" style lugs with his RH C2's. I would assume Cyber's use the same lug seat:


Not 100% sure on that, but damn close.

GL!!!

legendrida

All you need is 12X1.5MM! that's required for all Civic/integras

PreyStayShun

Incorrect sir, The thread pitch of 12x1.5mm is correct for our cars. However,there are three different types of lug seats. (60 degree tuner style, ball seat...and some other type of lug we never use for our cars.) OEM wheels use ball seats and most after market wheels are using the tuner style lug.

Yes you can use the two different seats on any rim but its unsafe since the lug nut does not make the right contact on the wheel, also people have been known to break studs this way as well.

RH wheels use tuner style lugs as pictured above. I used to have a picture describing the three different types but I was unable to find it.

GL OP

axelintegra

Ok so I will order the tuner style. Thank you preystayshun oh and heres a pic like you were talking about.

alphalanos

buddy club ftw