Velocity Stack Suppliers
03-17-2009, 11:40 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Milwaukee, WI, USA
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Velocity Stack Suppliers
What are a few good suppliers for intake manifold velocity stacks? In specific im looking for something with a 2" OD at the small side of it, then is short height wise so we can weld them inside the intake manifold... i searched around a little bit but honestly nothing to useful came up. Thanks!!
03-17-2009, 11:51 AM
#2
Honda-Tech Member
Join Date: Jul 2006
Location: Kent, England
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
03-17-2009, 08:13 PM
#4
Honda-Tech Member
Join Date: Jan 2008
Location: Bellingham, WA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: Velocity Stack Suppliers
If you have access to a lathe you could make your own. You can pretty easily make a tool out of steel to get whatever contour you want.
03-18-2009, 01:05 AM
#5
Honda-Tech Member
Join Date: Mar 2006
Location: Vancouver, BC, Canada
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Re: Velocity Stack Suppliers
I've made them in the past I just don't normally keep them in stock. Although for what individual stacks are going to cost as well as the way you make your manifolds you might be better off using something like this:
Trending Topics
03-22-2009, 03:23 PM
#9
Honda-Tech Member
Join Date: Mar 2009
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Re: Velocity Stack Suppliers
RossMachineRacing.com
they have them...in fact here is the link
http://rossmachineracing.com/velocitystacks.html
they have them...in fact here is the link
http://rossmachineracing.com/velocitystacks.html
Thread
Thread Starter
Forum
Replies
Last Post
Renegade
Tech / Misc
2
06-16-2004 12:07 PM
DsMWookie
Honda CRX / EF Civic (1988 - 1991)
11
08-24-2003 04:29 PM
