Need some lathe work done....
#1
Honda-Tech Member
Thread Starter
Need some lathe work done....
I realize this is small time for some of you machinists.....but I need some one to turn some hex stock on a lathe and tap/cut threads. I threw together some fast drawings of what I am needing. Prefer stainless but if I have to go MS, I will take it. Need Qty. 4 of the small ones and Qty. 2 of the longer ones. Dims are in mm with the exception to the one hole that is 10-32 thread. Both the short and longer ones are M6x1.0 cut threads on the one end. This is for some fuel rail standoffs for those inquiring minds. I can do better drawings, igs/dxf/dwg, etc. if you need them.
Let me know ASAP price and lead time. Thanks!!!!
PDF of the drawings
http://photos.imageevent.com/jasonk/...il%20bolts.pdf
Let me know ASAP price and lead time. Thanks!!!!
PDF of the drawings
http://photos.imageevent.com/jasonk/...il%20bolts.pdf
#3
Honda-Tech Member
Thread Starter
Re: Need some lathe work done....
As far as? I would prefer the hex as spec'd in the drawing....typical mill draw of 3/8", but I got your PM about the 7/16". I can make that work if I have to.
Trending Topics
#12
Honda-Tech Member
Join Date: Apr 2005
Location: Lincoln, Ne, USA
Posts: 1,895
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need some lathe work done....
I can probably turn them out of stainless round bar and machine some wrench flats on it...I have stainless bar in stock
#13
Honda-Tech Member
Thread Starter
Re: Need some lathe work done....
Yeah man, that will work too. Just want this done....time and price. PM me if you are serious about making them.
#18
Honda-Tech Member
Re: Need some lathe work done....
Thread
Thread Starter
Forum
Replies
Last Post
vaporboy12
Drag Racing
4
05-06-2006 08:42 AM