Need a good machine shop in Atlanta area
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2008
Location: usa
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Need a good machine shop in Atlanta area
Well I got a Sohc ZC motor that I replaced the head gasket with a MLS one. Unfortunately, one of the corners is wet with oil so I'm pretty sure the sealing surface wasn't good enough. I had scraped off the old one carefully hoping the mating surfaces were good.
Anyway, I'm going to take everything apart and have the surfaces machined, the cylinders honed, and the valves reground. What's the best machine shop in the Atlanta area to do all this? I want everything done correctly and to specs (I know...I should have done all this while the motor was apart the first time).
I hope this is the right forum to post this...I didn't know where else to put it.
Anyway, I'm going to take everything apart and have the surfaces machined, the cylinders honed, and the valves reground. What's the best machine shop in the Atlanta area to do all this? I want everything done correctly and to specs (I know...I should have done all this while the motor was apart the first time).
I hope this is the right forum to post this...I didn't know where else to put it.
#3
OG Fabricator
Join Date: Dec 2006
Location: Calgary, Alberta, Canada
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need a good machine shop in Atlanta area
I know these guys through my new Camaro, maybe ask them..?
http://www.atlpf.com/services.html
http://www.atlpf.com/services.html
#6
Honda-Tech Member
Thread Starter
Join Date: Jun 2008
Location: usa
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need a good machine shop in Atlanta area
Keep up the suggestions if anyone else has them. Thanks.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
EG_93Civic
Honda CRX / EF Civic (1988 - 1991)
10
06-17-2003 10:59 PM