My first pipe weld... haha
#3
Honda-Tech Member
Join Date: Jun 2003
Location: NYC bitchessss
Posts: 9,555
Likes: 0
Received 0 Likes
on
0 Posts
Re: My first pipe weld... haha (92hondalude)
what material is that?
it's easier to start on flat...get that down first...work on heat control, penetration, consistency, then move to pipe....
it's easier to start on flat...get that down first...work on heat control, penetration, consistency, then move to pipe....
#5
Re: My first pipe weld... haha (92hondalude)
you can do a couple things to improve...
less wire speed
bit more voltage
if you are getting big welds like that, either speed up on the welding or turn down the wire speed. Looks like you got some penetration through the metal, so heat might be right, just lower the wire speed a bit.
Work on penetration before "pretty" welds.
less wire speed
bit more voltage
if you are getting big welds like that, either speed up on the welding or turn down the wire speed. Looks like you got some penetration through the metal, so heat might be right, just lower the wire speed a bit.
Work on penetration before "pretty" welds.
#6
Honda-Tech Member
Thread Starter
Re: My first pipe weld... haha (solbrothers)
haha must be the welder then.. haha just kidding.
thanks for everyones help, i will slow down the wire
thanks for everyones help, i will slow down the wire
Thread
Thread Starter
Forum
Replies
Last Post
lkailburn
Welding / Fabrication
24
08-14-2007 04:06 PM
BERT-O
Acura RSX DC5 & Honda Civic EP3
13
04-29-2003 08:50 PM
Jsracingintegra
Acura Integra Type-R
4
07-19-2002 05:44 PM