Re: Lincoln Precision Tig 225 VS. Syncrowave 200 (Running925)
My lincoln PT has never had a single issue. EVER. In Three years of work. I'm not a shop, but I typically do a car a week. (exhaust, suspension pieces/parts, braces, little things, no huge race car builds)
Everyone here will say miller, some boards say lincoln. Go try them both, see who is local where you can get service from (in case you ever need it, both machines are very good and reliable).
Edit: you live in ohio, lincoln's world HQ is in cleveland, buy red.
Re: Lincoln Precision Tig 225 VS. Syncrowave 200 (Niles)
lol, no I was referring to their micro-start crap.
Some things I liked about the Syncrowave 200 is that most of my welding is done around 100 amps and the Miller has a higher duty cycle at those amperages than the Lincoln. I also like the auto post flow, and the torch has a really nice braided line that is super maneuverable. (I weld in a lot of tight/unusual places)
Bottom line is that I guarantee you will be happy with either one.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.