HF Adapter to 14b?
01-11-2008, 02:55 PM
#2
Honda-Tech Member
Join Date: Jan 2003
Location: Seattle, WA, USA
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
01-11-2008, 03:12 PM
#3
Thread Starter
Join Date: Dec 2007
Location: Cincinnati, Ohio, USA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Re: HF Adapter to 14b? (aw1234dude)
yeah I have seen that one but would i have to weld around plate to hold up cause it only lets you use 3 bolts on each side?
01-12-2008, 02:37 AM
#4
* B A N N E D *
Join Date: Jan 2008
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Re: HF Adapter to 14b? (Briang3a3)
nah man that **** is machined out of aluminum and the HF mani is cast iron...............cast iron is hard to weld, so is aluminum and they will not weld together expletive THAT ****!!!!!!!!!!!!!!!!!! you can jb weld that ****!
01-12-2008, 01:48 PM
#5
Honda-Tech Member
Re: HF Adapter to 14b? (aw1234dude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aw1234dude »</TD></TR><TR><TD CLASS="quote">http://www.bmcrace.com/product...id=50</TD></TR></TABLE>
Just be careful, bmc takes weeks and there communication is horrible.
Other companies on ebay sell them as well, and I'm sure another flange maker on here could make you something.
Just be careful, bmc takes weeks and there communication is horrible.
Other companies on ebay sell them as well, and I'm sure another flange maker on here could make you something.
01-13-2008, 12:14 AM
#6
Junior Member
Join Date: Aug 2007
Location: Socal
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Re: HF Adapter to 14b? (ninethree-civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ninethree-civic »</TD></TR><TR><TD CLASS="quote">nah man that **** is machined out of aluminum and the HF mani is cast iron...............cast iron is hard to weld, so is aluminum and they will not weld together expletive THAT ****!!!!!!!!!!!!!!!!!! you can jb weld that ****! </TD></TR></TABLE>
No they are not. Aluminum would melt badly. The adapters are cnc machined from mild steel.
No they are not. Aluminum would melt badly. The adapters are cnc machined from mild steel.
Thread
Thread Starter
Forum
Replies
Last Post
