f20c/gm th400 adapter plate
#2
Sexy Cheese Cake
Join Date: Feb 2004
Location: Ill INoise, U.S. of A
Posts: 2,444
Likes: 0
Received 0 Likes
on
0 Posts
Re: f20c/gm th400 adapter plate (PhatS2000Turbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PhatS2000Turbo »</TD></TR><TR><TD CLASS="quote">anyone know of any company of machine shop that makes adapter plates for the s2000 motor and the th400 tranny?</TD></TR></TABLE>
Highly doubt that its been done already. Will need to be custom most likely
Highly doubt that its been done already. Will need to be custom most likely
#3
Honda-Tech Member
Join Date: Dec 2004
Location: gainesville, Va, united states
Posts: 936
Likes: 0
Received 0 Likes
on
0 Posts
Re: f20c/gm th400 adapter plate (duckmanEG)
http://www.billsautofab.com/ he makes good adapter plates. I jsut ordered mine for my 4g63 to a power glide I would love to see a plate for a rwd honda
#6
Honda-Tech Member
Join Date: Aug 2007
Location: Southwest PA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Re: f20c/gm th400 adapter plate (PhatS2000Turbo)
we have a k-series to GM adapter plate here at Mazworx, but i'm assuming the bolt pattern is different. we can make the plate you're looking for no problem though. all we would need is a bell housing or a junk block that we can probe.
Trending Topics
#12
#13
Honda-Tech Member
Join Date: Feb 2004
Location: Cream Ridge, NJ
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Re: f20c/gm th400 adapter plate
Have you taken a look at the amount of tunnel that needs to be removed/relocated? The t400 is a wide transmission and also heavy. Allot of the super stock guys run a t350 depending on the power you make. The other thing you need to consider is DO NOT mess around with some budget rebuild. These will come apart/explode at high rpm. SEEN it and it was ugly at best. Unfortunately the only trans that does fit rather well doesn't seem to like the RPM either and that is the C4 ford trans. Can be made more then strong enough but have some sort of the seal issue that afffect a clutch pack above 8000 from what I have been told from someone that builds some pretty bullet proof ones. That was about a year or so ago so maybe things have changed. I know they have been running them on the modular motors and they spin them.
#16
#17
Junior Member
Join Date: Oct 2007
Location: Houston, TX, USA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: f20c/gm th400 adapter plate
We are in the middle of all the development for the plate then we will be testing it on our S2000, once everything goes well we will have a in stock off the shelf complete kit availible to the public, we will offer it with all mounts, adapter plate, and torque converter/flyplate and as a complete kit with the addition of a built transmission and shifter. Im not a sponser on here so not really going to go into any other details, if any one has any questions please feel free to pm me.
#19
Pirate General...YARRRR
Join Date: Jun 2004
Location: Kills, United States
Posts: 12,355
Likes: 0
Received 2 Likes
on
2 Posts
Re: f20c/gm th400 adapter plate
in for this.
I LOVE the th400 and have built a few... I don't think a stock F20 could spin one
If someone pulled this off the work would be out of control
I LOVE the th400 and have built a few... I don't think a stock F20 could spin one
If someone pulled this off the work would be out of control
#20
Honda-Tech Member
Re: f20c/gm th400 adapter plate
We are in the middle of all the development for the plate then we will be testing it on our S2000, once everything goes well we will have a in stock off the shelf complete kit availible to the public, we will offer it with all mounts, adapter plate, and torque converter/flyplate and as a complete kit with the addition of a built transmission and shifter. Im not a sponser on here so not really going to go into any other details, if any one has any questions please feel free to pm me.
I think I saw it on supraforums
I too am as we speak putting my built chevy trans in my SC300, lots of hammering, shaving, and good use of a port-a-power spreader fits like factory now tho
#24
Honda-Tech Member
Join Date: Jul 2004
Location: CA, USA
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
Re: f20c/gm th400 adapter plate
Any updates on this adapter plate?
I am in need of one for a K20 to Chevy for a Sand Dragster we're building.
Thanks,
Kyle Werks
West-Werks
I am in need of one for a K20 to Chevy for a Sand Dragster we're building.
Thanks,
Kyle Werks
West-Werks