CAD/CNC Machining Projects
#1
CAD/CNC Machining Projects
Evo billet front motor mount:
Miata waterkneck relocation housing (w/ provisions for coolant feed and water temp fitting):
Vacuum blocks:
RB25 head flange:
ATV handle bar clamps:
Genesis head flange:
ATV billet rear shock link:
Miata waterkneck relocation housing (w/ provisions for coolant feed and water temp fitting):
Vacuum blocks:
RB25 head flange:
ATV handle bar clamps:
Genesis head flange:
ATV billet rear shock link:
Trending Topics
#18
OG Fabricator
Join Date: Feb 2005
Location: Burlington, Ont., Canada
Posts: 1,864
Likes: 0
Received 1 Like
on
1 Post
Re: CAD/CNC Machining Projects
hurcos have a smaller footprint... i've never run one, but they seem decent.
phil, why didn't you make the rb flange so that it fits all the rb's? it is just a matter of adding a couple extra bolt holes. you could probably sell a lot more of them that way because then the manifold that is built with the multi pattern flange will fit different engines.
phil, why didn't you make the rb flange so that it fits all the rb's? it is just a matter of adding a couple extra bolt holes. you could probably sell a lot more of them that way because then the manifold that is built with the multi pattern flange will fit different engines.
#19
Re: CAD/CNC Machining Projects
No complaints here. Haven't had a single issue and we've been running it hard for 3 years. Chose this machine for a few reasons, programmer had run recomended them from running them in the past, they hold a good resale value, 20hp/8k rpm spindle, and theres a distributor that has machines in stock so purchashing/servicing is little to no wait.