sacermors

Looking to buy the parts for an mpfi swap. Need 88-91 civic/crx si intake manifold, throttle body, fuel rail, injectors, distributor, plugs for injectors and distributor and resistor box. Ill also take an obd1 intake manifold or parts that could be substituted for any that i need. As of right now i still need every part and have been to Georgia junkyards looking but no luck

h23vtec_dc2

iTrader: (1)

I have everything you need.intake manifold, throttle body, distributor, ecu,wiring converted, intake tube, ecu,fuel rail, injectors, etc. Pm me

sacermors

Pmd. Still for sale?

b18ctrb

iTrader: (72)

I have some parts as well. Harness, resistor box, fuel rail

90civicstdgold

I have a complete running 91 Si that will be used for parts. I can sell the entire MPFI swap if you're interested.

PM me and I'll swap phone numbers.

nihad

iTrader: (2)

Go with the OBD1 intake manifold either a DXLX or a si no big deal on which one you get and dont use the resistor box wire it in with out the resistor box use the obd1 injectors OK i have done it and its possible. Just wire the 4 ground wires from the injectors two to the one injector wire from your old Dual Point and the other two to the other ground wire.. Pretty simple

salbaje

i have obd1 d series manifold if interested

Blake Smith

If any parts left for a mpfi swap care to pm me. I'd greatly appreciate it.
A little info on my setup.....
(I have a d16a6 motor Trans and head but the swap was left as a dpfi. So I'd like to setup the motor like it should this is going to be my daily driver.)