AZ For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
#1
Honda-Tech Member
Thread Starter
For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
Hey All,
I got a job offer in a different state I figured I'd test the waters on my 95 Integra RS 4dr Sedan (DB7) As you know clean RS's are harder and harder to find now a days guys, not to mention JDM front sedans in general. I feel bad to let this project go, and it has come a LONG way, I just hope someone's willing to continue it to be honest. It doesn't make sense to leave a perfectly good daily driver sitting in a garage. I have enough toys, someone's going to get a deal here.
Registration is good until March 2013 and the car has a CLEAN TITLE, motor runs strong and the OEM Exedy clutch is new. I'm asking $5500 FIRM and have receipts for EVERYTHING LISTED BELOW. AC Blows cold, heater blows hot, engine is strong, doesn't burn oil...Last clocked it at 27.8 Hwy MPG. There is 130k miles on the chassis and the engine is a B20 "crate" motor from Tiger supposedly at 50k miles; but they all say that right? Here is what I do know, I've had the car for about 8k miles...and it runs fantastic.
Can't really ask for more, it's been a great DD for me and with my new job offer I just don't have the time to finish it up. For the fullest amount of information on the car feel free to take a look at my build thread in my sig.
I'm going to try to keep this relatively simple, I know I'm missing stuff but here is how she currently sits:
Exterior:
-JDM Front End (Black headlight housings w/HID's)~ Bumper needs to be re-sprayed
-VIS CF Hood~ Fitments not perfect but it looks pretty good as you can see, AZ heat kills CF as you all know.
-JDM OEM Fender Liners
-98+ Rear Bumper
-SIR-G Front Lip
-OEM Mud Flaps
Motor:
-B20 (all stock)
Transmission/Clutch:
-Resurfaced Flywheel
-Exedy OEM Clutch
-3-4-5 Gear Synchros
^^^ Completed w/in the last 3k
Wheels & Tires:
-A-Tec Finalspeed Erasers/MB Weapons 16x7 et 38
-205/45-16 FEDERAL 595 RS-R Racing 83W BSW
-4x100 5mm Akata Spacers 56.1mm Bore
-Blackworks Extended Wheel Studs
-Blackworks Billet Forged Open Ended Lug Nuts
-Muteki SR48 Wheel Locks 4pc. (Blk)
^^^ 95% Tread, Wheels are Mint...Less then 5k miles
Brakes:
-Wilwood Dynalite 4-Piston 12.2" Big Brake Kit
-Wilwood Front SS Brake Lines
-Stoptech SS Rear Brake Lines
-Centric Posi-Quiet Extended Wear Rear Pads
-Centric Premium OE Rear Rotors
-ATE Super Blue Brake Fluid
-Cryo-treated Rotors & Pads
^^^ Completed w/in the last 3k
Suspension:
-Eibach Pro Damper Struts
-Eibach Pro-kit Springs
-OEM ITR 22mm Rear Sway Bar
-OEM ITR Bushings/D Brackets
-Energy Suspension 22mm Sway Bar Bushings/D Brackets
-Beaks DC2 Subframe Reinforcement Kit
-Swift/Neuspeed 4-point Front Shock Tower
-NRG 4 point H-Brace (Not on car, comes with purchase)
-BWR Billet Lower Tie Bar (Not on car, comes with purchase)
-BWR Billet Lower Control Arms
-JDM 98 Spec ITR Front 25mm Sway
-OEM GSR Front Endlinks (Purchased New)
-OEM ITR Rear Endlinks (Purchase New)
^^^ All done w/in the last 5k miles
Cooling:
-Mishimoto Radiator
-Mishimoto Thermostat
Interior:
-Wannabe Suede Recaros
-JDM SIR-G Wheel
-ITR Shift ****
-ITR Shift Boot
-Fake Mugen Pedals
-Grey DB Carpet Died Black
^^^ Installed 12/21
Security:
-Kill Switch
-Scytec Alarm w/Starter kill & Shock Sensor
-Scytec Tilt Sensor
-Scytec Backup Battery System
-Scytec Glass Break Sensor
^^^ First "upgrade" when I bought the car.
Some Pics:
Ways to reach me:
PM Me
Text/Call me (before 10 please Central): 4 8 0 7 8 8 2 5 8 0
E-mail Me: maximillian.master@g m a i l . c o m (no spaces)
Please don't flame, if its not your thing just move on.
As with all requests, please bump if viewed!
I got a job offer in a different state I figured I'd test the waters on my 95 Integra RS 4dr Sedan (DB7) As you know clean RS's are harder and harder to find now a days guys, not to mention JDM front sedans in general. I feel bad to let this project go, and it has come a LONG way, I just hope someone's willing to continue it to be honest. It doesn't make sense to leave a perfectly good daily driver sitting in a garage. I have enough toys, someone's going to get a deal here.
Registration is good until March 2013 and the car has a CLEAN TITLE, motor runs strong and the OEM Exedy clutch is new. I'm asking $5500 FIRM and have receipts for EVERYTHING LISTED BELOW. AC Blows cold, heater blows hot, engine is strong, doesn't burn oil...Last clocked it at 27.8 Hwy MPG. There is 130k miles on the chassis and the engine is a B20 "crate" motor from Tiger supposedly at 50k miles; but they all say that right? Here is what I do know, I've had the car for about 8k miles...and it runs fantastic.
Can't really ask for more, it's been a great DD for me and with my new job offer I just don't have the time to finish it up. For the fullest amount of information on the car feel free to take a look at my build thread in my sig.
I'm going to try to keep this relatively simple, I know I'm missing stuff but here is how she currently sits:
Exterior:
-JDM Front End (Black headlight housings w/HID's)~ Bumper needs to be re-sprayed
-VIS CF Hood~ Fitments not perfect but it looks pretty good as you can see, AZ heat kills CF as you all know.
-JDM OEM Fender Liners
-98+ Rear Bumper
-SIR-G Front Lip
-OEM Mud Flaps
Motor:
-B20 (all stock)
Transmission/Clutch:
-Resurfaced Flywheel
-Exedy OEM Clutch
-3-4-5 Gear Synchros
^^^ Completed w/in the last 3k
Wheels & Tires:
-A-Tec Finalspeed Erasers/MB Weapons 16x7 et 38
-205/45-16 FEDERAL 595 RS-R Racing 83W BSW
-4x100 5mm Akata Spacers 56.1mm Bore
-Blackworks Extended Wheel Studs
-Blackworks Billet Forged Open Ended Lug Nuts
-Muteki SR48 Wheel Locks 4pc. (Blk)
^^^ 95% Tread, Wheels are Mint...Less then 5k miles
Brakes:
-Wilwood Dynalite 4-Piston 12.2" Big Brake Kit
-Wilwood Front SS Brake Lines
-Stoptech SS Rear Brake Lines
-Centric Posi-Quiet Extended Wear Rear Pads
-Centric Premium OE Rear Rotors
-ATE Super Blue Brake Fluid
-Cryo-treated Rotors & Pads
^^^ Completed w/in the last 3k
Suspension:
-Eibach Pro Damper Struts
-Eibach Pro-kit Springs
-OEM ITR 22mm Rear Sway Bar
-OEM ITR Bushings/D Brackets
-Energy Suspension 22mm Sway Bar Bushings/D Brackets
-Beaks DC2 Subframe Reinforcement Kit
-Swift/Neuspeed 4-point Front Shock Tower
-NRG 4 point H-Brace (Not on car, comes with purchase)
-BWR Billet Lower Tie Bar (Not on car, comes with purchase)
-BWR Billet Lower Control Arms
-JDM 98 Spec ITR Front 25mm Sway
-OEM GSR Front Endlinks (Purchased New)
-OEM ITR Rear Endlinks (Purchase New)
^^^ All done w/in the last 5k miles
Cooling:
-Mishimoto Radiator
-Mishimoto Thermostat
Interior:
-Wannabe Suede Recaros
-JDM SIR-G Wheel
-ITR Shift ****
-ITR Shift Boot
-Fake Mugen Pedals
-Grey DB Carpet Died Black
^^^ Installed 12/21
Security:
-Kill Switch
-Scytec Alarm w/Starter kill & Shock Sensor
-Scytec Tilt Sensor
-Scytec Backup Battery System
-Scytec Glass Break Sensor
^^^ First "upgrade" when I bought the car.
Some Pics:
Ways to reach me:
PM Me
Text/Call me (before 10 please Central): 4 8 0 7 8 8 2 5 8 0
E-mail Me: maximillian.master@g m a i l . c o m (no spaces)
Please don't flame, if its not your thing just move on.
As with all requests, please bump if viewed!
Last edited by PreyStayShun; 02-07-2012 at 08:37 AM. Reason: Typo
#2
Honda-Tech Member
Thread Starter
Re: For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
Location would have helped...my bad!!!
Cars located at the 17 & 101 loop in Phoenix, AZ.
Cars located at the 17 & 101 loop in Phoenix, AZ.
Last edited by PreyStayShun; 12-29-2011 at 03:15 PM. Reason: Location add...
#4
Honda-Tech Member
Thread Starter
Re: For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
^^^Thanks DBiNfEcTeD*, I appreciate it....and all the great feedback from start till now.
PS- Guys and girls, please don't email, text, or PM saying "I'll give you 4k w/out the wheels," etc...etc....I'm not trying to part the car and sell pieces separate. As you can tell there is far more then 7k into the car so who ever gets the car basically steals it. I'm not trying to drop numbers but just think about the variances: JDM Front, rebuilt tranny, paint...etc. Of course the car needs a little bit of love but its 90%+ finished and ready to daily drive out of the gate. This is a continued project car, not beginner project car.
Please don't insult me, from one Honda lover to the next.
Bump to keep the offers coming!
Cheers!
PS- Guys and girls, please don't email, text, or PM saying "I'll give you 4k w/out the wheels," etc...etc....I'm not trying to part the car and sell pieces separate. As you can tell there is far more then 7k into the car so who ever gets the car basically steals it. I'm not trying to drop numbers but just think about the variances: JDM Front, rebuilt tranny, paint...etc. Of course the car needs a little bit of love but its 90%+ finished and ready to daily drive out of the gate. This is a continued project car, not beginner project car.
Please don't insult me, from one Honda lover to the next.
Bump to keep the offers coming!
Cheers!
Trending Topics
#8
Re: For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
Bump for a clean sedan... Do you know if 15" wheels will fit over those brakes?
What does the car still need? (I only see a couple interior pieces and windshield trim)
Also mileage on car?
What does the car still need? (I only see a couple interior pieces and windshield trim)
Also mileage on car?
#9
Honda-Tech Member
Thread Starter
Re: For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
Car really doesn't need much, literally like you said....couple interior pieces and winshield trim. Does have a FULL interior and back seat as well of course. I dont imagine it would cost more then a couple hundred bucks to make the car look more or less pristine.
#10
Re: For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
Trying to find a clean Integra sedan in Ohio is a lost cause... it's starting to look like a plane ticket & road trip might be worth it.
Was the entire car painted with the front clip installed? Factory color or is that Championship White? Also are the only exterior flaws on the front bumper? Looks like it could use a respray on drivers front?
Was the entire car painted with the front clip installed? Factory color or is that Championship White? Also are the only exterior flaws on the front bumper? Looks like it could use a respray on drivers front?
#11
Honda-Tech Member
Thread Starter
Re: For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
Trying to find a clean Integra sedan in Ohio is a lost cause... it's starting to look like a plane ticket & road trip might be worth it.
Was the entire car painted with the front clip installed? Factory color or is that Championship White? Also are the only exterior flaws on the front bumper? Looks like it could use a respray on drivers front?
Was the entire car painted with the front clip installed? Factory color or is that Championship White? Also are the only exterior flaws on the front bumper? Looks like it could use a respray on drivers front?
Okay, so I purchased the car from a younger guy here in AZ...basically story goes as so: kids mom was upset the he was putting so much money into the car so she put the kibosh on it and forced him to sell. Thats where I came in, she was in pretty poor shape and I've spent the last year putting her back together.
When I purchased the car the clip was already installed and whole car was resprayed CSW, for the most part they did a great job but there is some slight overspray, not in any true noticable areas...for the rest of the car: not a ding or dent to be seen except for the flaw in the front bumper. He claimed after he sprayed the car he pulled up a bit to far under his brothers truck and the tow hitch got it, which seems feasable. The bumper is completely entact of course and still in alignment w/the car itself so it could just us a good respray, **** I'd probably do the front lip and side skirts at that time too but I'm a weird perfectionist.
#14
Honda-Tech Member
Thread Starter
Re: For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
bump for:
Price drop from $5750 down to $5500
Price drop from $5750 down to $5500
Last edited by PreyStayShun; 02-11-2012 at 10:38 AM.
#15
Honda-Tech Member
Thread Starter
Re: For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
All PM's replied, lots of interest since the price drop.
Too all those who have PM'd me, please don't ask if I will go below 5k...the car is worth quite a bit more, and I'm not struggling to sell.
Cheers All!
Too all those who have PM'd me, please don't ask if I will go below 5k...the car is worth quite a bit more, and I'm not struggling to sell.
Cheers All!
#16
Honda-Tech Member
Thread Starter
Re: For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
Hey Guys
Some people requested some pics so I figured I'd upload them for all to see. Flaws and all, no shame in my game. This car still needs a little bit of love, but everyone who's seen the build thread knows how far this car has come since I picked her up. Additionally I just did plugs/wires/cap etc, running great!!!
Here's what the garage looked like prior to putting her together:
Additional Pics:
^^^Brand New
Some people requested some pics so I figured I'd upload them for all to see. Flaws and all, no shame in my game. This car still needs a little bit of love, but everyone who's seen the build thread knows how far this car has come since I picked her up. Additionally I just did plugs/wires/cap etc, running great!!!
Here's what the garage looked like prior to putting her together:
Additional Pics:
^^^Brand New
Last edited by PreyStayShun; 01-29-2012 at 11:34 AM.
#17
Honda-Tech Member
Join Date: Jul 2008
Location: Cen-Coast 831, CA, U.S.A.
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Re: For Sale: JDM Front 1995 Acura Integra RS SEDAN (DB7/DB8)
whoevers askin below $5k is smokin something, bro.. $5k is already a sweet deal considering the parts installed. Hell, 5k is a stock price. BUMP for another project enthusiast. GLWS man.