FS: FBP '00 Si (EM1 TURBO!!)
06-14-2005, 10:40 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2001
Location: GO LEAFS GO, NY, USA
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
FS: FBP '00 Si (EM1 TURBO!!)
>>>>> NEW PRICE [lowered] $15k w/out seats <<<<<
OR
$14k w/out seats and wheels.
*************** NEW PICS!! ***************
Yup.
Considering selling my car. bought it brand new off the lot in Jan of '00. Im the ONLY owner. never been wrecked. clean title. babied its entire life. Mobil 1 since day 1.
Compression test last week yielded 205-210 across the board. ZERO problems. Paint is flawless, never been in the snow.
Located in NY
Mods inside and out are listed:
pecs are as follows:
'00 B16a2 ODB2 engine (came with the car, EM1 chassis)
T3/T04e trim turbo with .63 AR and .54 cold side
Drag manifold
2.5" Drag downpipe
3" Straight pipe
3" Thermal Full Stainless exhaust
Tial 35mm Wastegate
HKS BOV
Spearco Front mount intercooler
Polished intercoolerpiping
all silicone coupllers
Turbonetics T-bolt clamps
DSM 450 injectors
OBD1 clips
P28 converted to P72 OBD1 ECU with OBD2-1 conversion harness
Tuned ECU with Uberdata and datalogging
ARP headstuds
stock head and block (have parts not installed if interested...ie, Darton 83mm Iron Ductile sleeves)
brand new headgasket change 500 miles ago with copperspray
just did compression last week...205 across the board
OEM Honda CTR red valve cover
OEM Honda CTR front strut bar
Comptech USA Front alluminum strut bar anodized red
Mugen rear strut bar
comptech USA rear sway bar (23mm)/tie bar combo (anodized red)
KYB AGX shox (4way adjustable front, 8-way rear)
Ground Control coilovers with custom Eibach ERS spring rates
Poly motor mounts
poly shifter mounts
DC sports short shifter
OEM honda CTR shift boot
OEM Honda CTR shift ****
Recaro Speed seats with Ek rails (red with alcantara/suede)
Takata MPH340R harness
Pivot adjustable shift lamp with brain
APexi AVCR boost controller
Apexi turbo timer
Autometer boost guage
autometer a/F guage
autometer dual bezel cluster
OEM honda CTR dash inlay (carbon)
Mugen front lip
OEM honda fog lights and bezels and switch painted yellow (JDM)
OEM Honda CTR headlights with city light
Mugen reservioir socks
Mugen licsence plate bolts
Spoon thermostat
Spoon drain and tranny plugs (magnetic)
Tein hood dampers
ODD1 resitor box wired in
Volk/Rays gram light pros (2 piece forged) 17" gold with polished lip
205/40/17 Falken FK451 tires (500 miles)
DVD player in glove box
custom mounted 3" screen in dash
Pioneer Premier head unit
Brembo crossdrilled and slotted rotors front and rear
Hawk HP+ front and rear pads
Motul fluid
stainless lines
exedy organic race clutch
exedy race plate
Blue Book Value in stock form is: $12,000 with 55,000 miles in excellent condition. Im asking $16,000 with every mod wheels + seats extra but negotiatable
Pics will come as soon as i can get a couple shots this weekend.
Modified by Mr. Vapor at 9:04 PM 7/12/2005
Modified by Mr. Vapor at 5:35 PM 7/17/2005
Modified by Mr. Vapor at 2:14 PM 7/19/2005
Modified by Mr. Vapor at 5:05 PM 7/26/2005
OR
$14k w/out seats and wheels.
*************** NEW PICS!! ***************
Yup.
Considering selling my car. bought it brand new off the lot in Jan of '00. Im the ONLY owner. never been wrecked. clean title. babied its entire life. Mobil 1 since day 1.
Compression test last week yielded 205-210 across the board. ZERO problems. Paint is flawless, never been in the snow.
Located in NY
Mods inside and out are listed:
pecs are as follows:
'00 B16a2 ODB2 engine (came with the car, EM1 chassis)
T3/T04e trim turbo with .63 AR and .54 cold side
Drag manifold
2.5" Drag downpipe
3" Straight pipe
3" Thermal Full Stainless exhaust
Tial 35mm Wastegate
HKS BOV
Spearco Front mount intercooler
Polished intercoolerpiping
all silicone coupllers
Turbonetics T-bolt clamps
DSM 450 injectors
OBD1 clips
P28 converted to P72 OBD1 ECU with OBD2-1 conversion harness
Tuned ECU with Uberdata and datalogging
ARP headstuds
stock head and block (have parts not installed if interested...ie, Darton 83mm Iron Ductile sleeves)
brand new headgasket change 500 miles ago with copperspray
just did compression last week...205 across the board
OEM Honda CTR red valve cover
OEM Honda CTR front strut bar
Comptech USA Front alluminum strut bar anodized red
Mugen rear strut bar
comptech USA rear sway bar (23mm)/tie bar combo (anodized red)
KYB AGX shox (4way adjustable front, 8-way rear)
Ground Control coilovers with custom Eibach ERS spring rates
Poly motor mounts
poly shifter mounts
DC sports short shifter
OEM honda CTR shift boot
OEM Honda CTR shift ****
Recaro Speed seats with Ek rails (red with alcantara/suede)
Takata MPH340R harness
Pivot adjustable shift lamp with brain
APexi AVCR boost controller
Apexi turbo timer
Autometer boost guage
autometer a/F guage
autometer dual bezel cluster
OEM honda CTR dash inlay (carbon)
Mugen front lip
OEM honda fog lights and bezels and switch painted yellow (JDM)
OEM Honda CTR headlights with city light
Mugen reservioir socks
Mugen licsence plate bolts
Spoon thermostat
Spoon drain and tranny plugs (magnetic)
Tein hood dampers
ODD1 resitor box wired in
Volk/Rays gram light pros (2 piece forged) 17" gold with polished lip
205/40/17 Falken FK451 tires (500 miles)
DVD player in glove box
custom mounted 3" screen in dash
Pioneer Premier head unit
Brembo crossdrilled and slotted rotors front and rear
Hawk HP+ front and rear pads
Motul fluid
stainless lines
exedy organic race clutch
exedy race plate
Blue Book Value in stock form is: $12,000 with 55,000 miles in excellent condition. Im asking $16,000 with every mod wheels + seats extra but negotiatable
Pics will come as soon as i can get a couple shots this weekend.
Modified by Mr. Vapor at 9:04 PM 7/12/2005
Modified by Mr. Vapor at 5:35 PM 7/17/2005
Modified by Mr. Vapor at 2:14 PM 7/19/2005
Modified by Mr. Vapor at 5:05 PM 7/26/2005
06-16-2005, 01:48 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2001
Location: GO LEAFS GO, NY, USA
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: FBP '00 Si (Mr. Vapor)
some things i forgot to add!!
OEM Honda JDM Thin Side Moldings PAINTED TO MATCH not the gay flat black that people half *** it do!
OEM Honda JDM CTR Folding Mirrors
Tein Hood Dampners
OEM Honda JDM Thin Side Moldings PAINTED TO MATCH not the gay flat black that people half *** it do!
OEM Honda JDM CTR Folding Mirrors
Tein Hood Dampners
06-16-2005, 05:35 PM
#6
Honda-Tech Member
Re: FS: FBP '00 Si (Mr. Vapor)
seen this car in person and its top notch parts and immaculate condition make it a nice find for anyone looking into a civic.. this car is minty mint and has all of the wicked parts people dream about.
and its hella fast, gives ls1rx7's a run for their money....
bump for agent boost!
and its hella fast, gives ls1rx7's a run for their money....
bump for agent boost!
Trending Topics
06-17-2005, 06:08 PM
#8
Honda-Tech Member
Thread Starter
Join Date: Jul 2001
Location: GO LEAFS GO, NY, USA
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: FBP '00 Si (lostsol82)
bump, forgot to add....JDM CTR Folding mirrors...or did i add that? i forgot.
lostsol, who are you? have we met?
lostsol, who are you? have we met?
06-21-2005, 06:31 PM
#17
Honda-Tech Member
Join Date: Aug 2004
Location: rochester, ny, usa
Posts: 332
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: FBP '00 Si (Mr. Vapor)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Vapor »</TD></TR><TR><TD CLASS="quote">bump, forgot to add....JDM CTR Folding mirrors...or did i add that? i forgot.
lostsol, who are you? have we met?</TD></TR></TABLE>
i belive we have met briefly at the meet at rit last year,
if im not mistaken, i kind of knew your girlfriend, i use to go to autocrafting and thats where i know her from, i knew porter,
btw, do you know if autocrafting is still doing there car **** or are they just specailty vehicles??
lostsol, who are you? have we met?</TD></TR></TABLE>
i belive we have met briefly at the meet at rit last year,
if im not mistaken, i kind of knew your girlfriend, i use to go to autocrafting and thats where i know her from, i knew porter,
btw, do you know if autocrafting is still doing there car **** or are they just specailty vehicles??
