93 Civic coupe, fully built 5spd
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Funtown, MA, USA
Posts: 813
Likes: 0
Received 0 Likes
on
0 Posts
93 Civic coupe, fully built 5spd
PLEASE BUMP IF YOU VIEW!!
need to sell by August for paramedic school!
93 civic coupe EX
Frost White
5spd
Tan interior
pw,pl, sunroof
no a/c or p/s
drivers fender has some dents, and drivers door has one dent, back bumper got scratched up (hit and run). literally just got scrathced up no cracks
Vis CF hood
JDM blackhousing Headlights
Amber corners
Bronze hx wheels with new front tires
JDM yellow fogs
HID's
JDM B16 SIR II head
new valve guides
new seals
Crower.5mm oversized valves
Skunk2 Ti retainers
Skunk2 springs
3 angle valve job
GE headgasket
b16 IM
new gaskets
b.crower stage 3 cams
95 LS block
bored .20
wiseco 12.1:1 cr pistons
Eagle rods
GE block guard
ACL bearings
ARP headstuds
ARP rod studs
ITR oil pump
ITR water pump
ITR timing belt
94 GSR tranny 2nd and 3rd gear rebuilt.
Fidanza 8lbs Flywheel
ACT SS clutch
J's fake intake
Chrome tuned
DC 421 header
B&M FPR
CF wire cover
2.5 test pipe
ITR valve cover
APexi World Sport exhasut
Filled mounts
megan coilovers
ITR shift boot
ITR ****
JDM 345cc prelude injectors
resistor box
cd player
ARP Extended wheel studs (waiting installation)
UGR lower control arms (orange)
Innovate LC-1 wideband
7k miles on motor..
this setup has been to the track once. went 13.5 NA with crower stg 2 cams with a 2.2 60'....just purchased b.crower stage 3 cams.
interior is mint with one minor rippage starting on driver seat.
oem wheel bearings in the front are being put in.
not 100% on a final price...i know i need it in the 5k area and depends on what i add or fix until its sold. the throw-out bearing is making some knows occasionally. i will include a new one OEM with the sale. looking for $5000 with the throw-out needing replacing. if i keep the car without it sellin and get to puttin the t-o bearing in, prolly be more like $5400-5500 ish.
this is just an idea and moslty to gauge interest.... if a buyer comes along so be it, shes gone. if not, im in no rush, medic school isnt till next august.
intentions in the future if it doesnt sell: AEBS IM, POWER 68mm TB, Walbro255, HID's
Modified by CivicB18C1 at 10:27 PM 1/15/2007
Modified by CivicB18C1 at 8:19 PM 2/12/2007
Modified by CivicB18C1 at 9:39 PM 2/17/2007
need to sell by August for paramedic school!
93 civic coupe EX
Frost White
5spd
Tan interior
pw,pl, sunroof
no a/c or p/s
drivers fender has some dents, and drivers door has one dent, back bumper got scratched up (hit and run). literally just got scrathced up no cracks
Vis CF hood
JDM blackhousing Headlights
Amber corners
Bronze hx wheels with new front tires
JDM yellow fogs
HID's
JDM B16 SIR II head
new valve guides
new seals
Crower.5mm oversized valves
Skunk2 Ti retainers
Skunk2 springs
3 angle valve job
GE headgasket
b16 IM
new gaskets
b.crower stage 3 cams
95 LS block
bored .20
wiseco 12.1:1 cr pistons
Eagle rods
GE block guard
ACL bearings
ARP headstuds
ARP rod studs
ITR oil pump
ITR water pump
ITR timing belt
94 GSR tranny 2nd and 3rd gear rebuilt.
Fidanza 8lbs Flywheel
ACT SS clutch
J's fake intake
Chrome tuned
DC 421 header
B&M FPR
CF wire cover
2.5 test pipe
ITR valve cover
APexi World Sport exhasut
Filled mounts
megan coilovers
ITR shift boot
ITR ****
JDM 345cc prelude injectors
resistor box
cd player
ARP Extended wheel studs (waiting installation)
UGR lower control arms (orange)
Innovate LC-1 wideband
7k miles on motor..
this setup has been to the track once. went 13.5 NA with crower stg 2 cams with a 2.2 60'....just purchased b.crower stage 3 cams.
interior is mint with one minor rippage starting on driver seat.
oem wheel bearings in the front are being put in.
not 100% on a final price...i know i need it in the 5k area and depends on what i add or fix until its sold. the throw-out bearing is making some knows occasionally. i will include a new one OEM with the sale. looking for $5000 with the throw-out needing replacing. if i keep the car without it sellin and get to puttin the t-o bearing in, prolly be more like $5400-5500 ish.
this is just an idea and moslty to gauge interest.... if a buyer comes along so be it, shes gone. if not, im in no rush, medic school isnt till next august.
intentions in the future if it doesnt sell: AEBS IM, POWER 68mm TB, Walbro255, HID's
Modified by CivicB18C1 at 10:27 PM 1/15/2007
Modified by CivicB18C1 at 8:19 PM 2/12/2007
Modified by CivicB18C1 at 9:39 PM 2/17/2007
Trending Topics
#23
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Funtown, MA, USA
Posts: 813
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93 Civic coupe, fully built 5spd (13s del sol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 13s del sol »</TD></TR><TR><TD CLASS="quote">fully built but no cam gears ? </TD></TR></TABLE>
yea, do u know anything about hondas???? try researching and see what some 10 sec hondas are using for cam gears.....OEM FTW
yea, do u know anything about hondas???? try researching and see what some 10 sec hondas are using for cam gears.....OEM FTW