FS: 1990 Civic SI
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Reno, NV, USA
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
FS: 1990 Civic SI
I just want to see how much I could get for my hatch. Dont know how much this would go for so make me some offers or trades.
Located in Reno, NV
The car is a 1990 SI hatch:
Body: straight only dent on the driver side where the door and the quarter panel meet.
Interior: clean interior almost mint, Delsol seats that are almost mint, GSR center console.
Engine: D16z6 that was pulled from a Delsol with only 100k short ram intake, DC header, fuel gauge and regulator, full exhaust 2 1/4 inch with a high flow cat from catco.
suspension: sits on some GSR fat fives with tokico shocks and neuspeed springs....
Price: dont know how much but make some offers. Dont know how much I can get for it..
DOES NOT COME WITH RIMS OR CENTER CONSOLE
Modified by 1rEnO_EF at 3:39 PM 1/10/2005
Located in Reno, NV
The car is a 1990 SI hatch:
Body: straight only dent on the driver side where the door and the quarter panel meet.
Interior: clean interior almost mint, Delsol seats that are almost mint, GSR center console.
Engine: D16z6 that was pulled from a Delsol with only 100k short ram intake, DC header, fuel gauge and regulator, full exhaust 2 1/4 inch with a high flow cat from catco.
suspension: sits on some GSR fat fives with tokico shocks and neuspeed springs....
Price: dont know how much but make some offers. Dont know how much I can get for it..
DOES NOT COME WITH RIMS OR CENTER CONSOLE
Modified by 1rEnO_EF at 3:39 PM 1/10/2005
#4
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Reno, NV, USA
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: (KFBhonda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KFBhonda »</TD></TR><TR><TD CLASS="quote">$900</TD></TR></TABLE>
HHMMM no
HHMMM no
#5
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Reno, NV, USA
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: (N.O.R.E)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by N.O.R.E »</TD></TR><TR><TD CLASS="quote">$901</TD></TR></TABLE>
Damm i just might have to do this.....
Damm i just might have to do this.....
#6
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Reno, NV, USA
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: (1rEnO_EF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1rEnO_EF »</TD></TR><TR><TD CLASS="quote">
Damm i just might have to do this..... </TD></TR></TABLE>
Damm i just might have to do this..... </TD></TR></TABLE>
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Reno, NV, USA
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: 1990 Civic SI (FOMULA91)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FOMULA91 »</TD></TR><TR><TD CLASS="quote">It looks pretty nice. I’ll probably pay about $1500-$2500. Free bump for a nice looking SI. </TD></TR></TABLE>
Thanks
Thanks
#13
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Reno, NV, USA
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DxTrix)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DxTrix »</TD></TR><TR><TD CLASS="quote">pmed</TD></TR></TABLE>
replied
replied
#15
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Reno, NV, USA
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SmokeU)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SmokeU »</TD></TR><TR><TD CLASS="quote">If only you were in Vegas and it were a month from now.</TD></TR></TABLE>
Hit me up a month from now I might still have it
Hit me up a month from now I might still have it
#17
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Reno, NV, USA
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SmokeU)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SmokeU »</TD></TR><TR><TD CLASS="quote">Yea but you'll still be in Reno.
I'm in Phoenix, I'm sure my friend wouldn't mind a little road trip to Vegas and stay for a night but Reno is crazy far.</TD></TR></TABLE>
its only about 14 hour drive I think
I'm in Phoenix, I'm sure my friend wouldn't mind a little road trip to Vegas and stay for a night but Reno is crazy far.</TD></TR></TABLE>
its only about 14 hour drive I think
#19
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Reno, NV, USA
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: (1rEnO_EF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1rEnO_EF »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
#24
Re: (1rEnO_EF)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1rEnO_EF »</TD></TR><TR><TD CLASS="quote">its only about 14 hour drive I think </TD></TR></TABLE>
Haha, yea I wouldn't mind that drive one way but I would have no way to get there.
Bump for you.
Haha, yea I wouldn't mind that drive one way but I would have no way to get there.
Bump for you.
#25
Honda-Tech Member
Thread Starter
Join Date: Aug 2003
Location: Reno, NV, USA
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SmokeU)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SmokeU »</TD></TR><TR><TD CLASS="quote">
Haha, yea I wouldn't mind that drive one way but I would have no way to get there.
Bump for you.</TD></TR></TABLE>
A plane ticket shouldnt be too much.
Haha, yea I wouldn't mind that drive one way but I would have no way to get there.
Bump for you.</TD></TR></TABLE>
A plane ticket shouldnt be too much.