FL 96 Civic b16A converted SIRII/SI, new paint, tucked and shaved bay
#1
96 Civic b16A converted SIRII/SI, new paint, tucked and shaved bay
$4700
A few short months ago I bought this civic off another user on here in Central Florida. The car is very solid and only needed some finishing touches to clean it up, which I have done for the most part. Unfortunately my wife has moved back to part time work so I can't justify the toy vehicle.
Good:
- several new parts from honda such as window moldings, roof moldings, miscellaneous clips, etc.
- I had the entire car repainted OEM black, and she is BEAUTIFUL!
- Also, one of the axles started to go so I replaced both sides along with fresh Honda MTF in the tranny.
-The whole car is extremely solid. Pulls hard all the way to 8600, sounds great, and SO MANY brand new parts. PO did things the right way on this car. I just took it for a spin yesterday and it's a blast. I wish I could spend more time in it, but it's just not practical enough right now for my circumstances.
Bad:
- Needs an alignment
- Wipers not installed (though everything is there and comes with the wipers and even some new blades!)
Here is his original listing (before repaint):
http://hondamarketplace.com/showthre...&highlight=SiR
Miles:
The car actually has about 200k on it according to Carfax, but it is in fantastic shape. The engine is a fresh swap and is practically new.
I dont know the exact mileage because it has a jdm cluster and the miles on the title are exempt.
SUSPENSION
brand new (less then 400 miles on everything) skunk2 pro c full dampeners
skunk2 pro series front camber kit
skunk2 rear camber kit
omni control arms
brand new oem honda rear trailer arm and drums
brand new oem front calipers
stoptech rotors
russell stainless steal brakelines fr/rr
new oem wheel studs all around
brand new og axis wheels 15x8 +25 brand new federal 595 195 45 15 tires
muteki wheel locks/ and bulldog wheel lock.
ENGINE
b16a4 from H motors 30km
canadian b16 tranny 4.7 final drive.
Edlebroke victor x manifold
hondata intake manifold gasket
skunk2 pro series 64mm throttle body
aem fuel rail
aem FPR
aem fuel filter
B&M fuel gauge
stainless steel russell fuel lines and cooling lines
skunk2 cam gears
oem ITR valve cover
sr racing brake and clutch fluid covers
oem itr oil cap
koyo radiator
FAL fan and shroud
SPOON spark plug wires
SPOON radiator hoses
DC 4-1 header
plm test pipe
full apexi WS2 catback exhaust
act hdss clutch kit
act pro lite flywheel
Greddy timing belt
gates alternator belt
unorthadox crank pulley and alternator pulley
brand new oem bolts every single 10mm bolt
brand new trans bolts every bolt from honda
HASPORT solid motor mounts
ITR shift linkage
russel stainless steal clutch line
brand new iac valve
brand new slave cylinder
brand new battery
brand new harness wire tucked
jdm p30 street tuned. launch control, shift light, 8600rpm redline
walbro 255 fuel pump
js racing intake
bay is shaved and sprayed
brand new oem gas tank
BODY
brand new purchased from honda 00 civic front end
brand new oem si grille painted oem black
brand new oem si lip painted oem black
shaved side moldings
brand new rear deck lid
99-00 tailights
brand new rear bumper
brand new gas lid
pwjdm foglights
sir2 headlights
interior
brand new door panels
pwjdm carbon kelvar airbag delete
radio delete
brand new window regulators
SIR2 gauge cluster
Quickest way to get in touch with me will be through text: 910.835.6263
Someone buy this!
New price: $4700
Trades: I will entertain trades for CRV's, Subaru wagons, Foresters, or mostly stock GTI's.
Engine bay: (Pre-paint)
More Pictures! http://s955.photobucket.com/user/Kwa...ary/96%20Civic
A few short months ago I bought this civic off another user on here in Central Florida. The car is very solid and only needed some finishing touches to clean it up, which I have done for the most part. Unfortunately my wife has moved back to part time work so I can't justify the toy vehicle.
Good:
- several new parts from honda such as window moldings, roof moldings, miscellaneous clips, etc.
- I had the entire car repainted OEM black, and she is BEAUTIFUL!
- Also, one of the axles started to go so I replaced both sides along with fresh Honda MTF in the tranny.
-The whole car is extremely solid. Pulls hard all the way to 8600, sounds great, and SO MANY brand new parts. PO did things the right way on this car. I just took it for a spin yesterday and it's a blast. I wish I could spend more time in it, but it's just not practical enough right now for my circumstances.
Bad:
- Needs an alignment
- Wipers not installed (though everything is there and comes with the wipers and even some new blades!)
Here is his original listing (before repaint):
http://hondamarketplace.com/showthre...&highlight=SiR
Miles:
The car actually has about 200k on it according to Carfax, but it is in fantastic shape. The engine is a fresh swap and is practically new.
I dont know the exact mileage because it has a jdm cluster and the miles on the title are exempt.
SUSPENSION
brand new (less then 400 miles on everything) skunk2 pro c full dampeners
skunk2 pro series front camber kit
skunk2 rear camber kit
omni control arms
brand new oem honda rear trailer arm and drums
brand new oem front calipers
stoptech rotors
russell stainless steal brakelines fr/rr
new oem wheel studs all around
brand new og axis wheels 15x8 +25 brand new federal 595 195 45 15 tires
muteki wheel locks/ and bulldog wheel lock.
ENGINE
b16a4 from H motors 30km
canadian b16 tranny 4.7 final drive.
Edlebroke victor x manifold
hondata intake manifold gasket
skunk2 pro series 64mm throttle body
aem fuel rail
aem FPR
aem fuel filter
B&M fuel gauge
stainless steel russell fuel lines and cooling lines
skunk2 cam gears
oem ITR valve cover
sr racing brake and clutch fluid covers
oem itr oil cap
koyo radiator
FAL fan and shroud
SPOON spark plug wires
SPOON radiator hoses
DC 4-1 header
plm test pipe
full apexi WS2 catback exhaust
act hdss clutch kit
act pro lite flywheel
Greddy timing belt
gates alternator belt
unorthadox crank pulley and alternator pulley
brand new oem bolts every single 10mm bolt
brand new trans bolts every bolt from honda
HASPORT solid motor mounts
ITR shift linkage
russel stainless steal clutch line
brand new iac valve
brand new slave cylinder
brand new battery
brand new harness wire tucked
jdm p30 street tuned. launch control, shift light, 8600rpm redline
walbro 255 fuel pump
js racing intake
bay is shaved and sprayed
brand new oem gas tank
BODY
brand new purchased from honda 00 civic front end
brand new oem si grille painted oem black
brand new oem si lip painted oem black
shaved side moldings
brand new rear deck lid
99-00 tailights
brand new rear bumper
brand new gas lid
pwjdm foglights
sir2 headlights
interior
brand new door panels
pwjdm carbon kelvar airbag delete
radio delete
brand new window regulators
SIR2 gauge cluster
Quickest way to get in touch with me will be through text: 910.835.6263
Someone buy this!
New price: $4700
Trades: I will entertain trades for CRV's, Subaru wagons, Foresters, or mostly stock GTI's.
Engine bay: (Pre-paint)
More Pictures! http://s955.photobucket.com/user/Kwa...ary/96%20Civic
Last edited by kwalitee; 02-15-2014 at 07:52 AM.
#5
Re: 96 Civic b16A converted SIRII/SI, new paint, tucked and shaved bay
#7
Honda-Tech Member
iTrader: (116)
Join Date: Nov 2002
Location: Orange County, CA, USA
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
Re: 96 Civic b16A converted SIRII/SI, new paint, tucked and shaved bay
Yeah thats for US motors. Like i said a jdm gsr and a jdm type R are both stamped b18C, no numbers after the letter. Thats why when you say you have a JDM b16a4 it sounds like a US motor. Not a big deal, i dont know everything just that it is unusual. The civics and integras in japan were b16as or b16bs. Here there are b16a1s and a2s(del sol n em1 i believe)
Trending Topics
#8
Re: 96 Civic b16A converted SIRII/SI, new paint, tucked and shaved bay
I see. I certainly don't know everything either. PO did the swap but I still have his contact info, let me see if I can gather that information from him.
#13
Re: 96 Civic b16A converted SIRII/SI, new paint, tucked and shaved bay
Make me some offers...Keep getting interested people who flake out.
Ready to sell. I need a larger car ASAP.
Ready to sell. I need a larger car ASAP.
#16
Honda-Tech Member
Re: 96 Civic b16A converted SIRII/SI, new paint, tucked and shaved bay
bump for a nice car, but why would u post the old post with a way cheaper price. but car looks really nice and build right!
#17
Re: 96 Civic b16A converted SIRII/SI, new paint, tucked and shaved bay
$5000 takes it...
Thread
Thread Starter
Forum
Replies
Last Post
kwalitee
Florida (Sales)
13
02-15-2014 07:38 AM