1988 Honda CRX Si w/ JDM b16 - CA (Nor Cal)
#1
Thread Starter
Join Date: Dec 2005
Location: Sacramento, ca, US
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
EXTRA CLEAN!! 1988 Honda CRX Si w/ JDM b16 - CA (Nor Cal)
vin# JHMED9361JSO16842
Clean title
Alright well my 06 NBP DC5 should be here next week (on a boat from Japan right now) and im going to be selling my baby its an 88 CRX Si. The pics speak for themselves.
Mods-
JDM B16 (Hmotorsonline.com)install about 2 years ago with no problems what so ever besides replacing the alternator and distributor.
- Motor rebuilt before install (cam/crank seals/ head gasket/ timing belt/ water pump/ speedo cable/ all the good stuff with receipts)
- 2 1/4 piping straight thru with stock muffler
- HAsport mounts and shift linkage
-Ingalls front camber kit
- H&R springs with Tokico blue shocks installed 9 mos ago
- Black Rota Slipstreams with Kuhmo Ecsta tires
- 90-91 Si seats very clean, no rips or tears (extra clean)
-90-91 tailights
-Pioneer 4 way speakers (already wired for sub and amp)
- full Si trunk/rear interior pieces
-sunroof still works great!
Body miles is about 270K miles on the motor is about 55k
cons- No A/C or Heat (hey its an 88 and the heat just went out! lol)
The car runs great and has been well taken care of. Only took it to the track once about 1 year ago. Ran a 15.1 with just an intake before I got the exhaust and suspension. As listed from the mods, I have put a lot of money it this car. DOES NOT PASS CA SMOG///
Asking price $3,000
For any more info and pics feel free to email me at<U> CMBSC12@HOTMAIL.COM</U>
Car should be ready for sell at around the start of the month. NO LOW BALLERS PLEASE! If you want a $1500 CRX then go buy a piece of crap one then. You will not find that many CRX's as clean as this one. PICS OF THE MOTOR WILL BE UP ON WEDNESDAY AFTERNOON><U></U>
<center>
</center>
<center>
</center>
<center>
</center>
Modified by gm3w12 at 8:33 AM 2/24/2006
Clean title
Alright well my 06 NBP DC5 should be here next week (on a boat from Japan right now) and im going to be selling my baby its an 88 CRX Si. The pics speak for themselves.
Mods-
JDM B16 (Hmotorsonline.com)install about 2 years ago with no problems what so ever besides replacing the alternator and distributor.
- Motor rebuilt before install (cam/crank seals/ head gasket/ timing belt/ water pump/ speedo cable/ all the good stuff with receipts)
- 2 1/4 piping straight thru with stock muffler
- HAsport mounts and shift linkage
-Ingalls front camber kit
- H&R springs with Tokico blue shocks installed 9 mos ago
- Black Rota Slipstreams with Kuhmo Ecsta tires
- 90-91 Si seats very clean, no rips or tears (extra clean)
-90-91 tailights
-Pioneer 4 way speakers (already wired for sub and amp)
- full Si trunk/rear interior pieces
-sunroof still works great!
Body miles is about 270K miles on the motor is about 55k
cons- No A/C or Heat (hey its an 88 and the heat just went out! lol)
The car runs great and has been well taken care of. Only took it to the track once about 1 year ago. Ran a 15.1 with just an intake before I got the exhaust and suspension. As listed from the mods, I have put a lot of money it this car. DOES NOT PASS CA SMOG///
Asking price $3,000
For any more info and pics feel free to email me at<U> CMBSC12@HOTMAIL.COM</U>
Car should be ready for sell at around the start of the month. NO LOW BALLERS PLEASE! If you want a $1500 CRX then go buy a piece of crap one then. You will not find that many CRX's as clean as this one. PICS OF THE MOTOR WILL BE UP ON WEDNESDAY AFTERNOON><U></U>
<center>
</center>
<center>
</center>
<center>
</center>
Modified by gm3w12 at 8:33 AM 2/24/2006
#3
Thread Starter
Join Date: Dec 2005
Location: Sacramento, ca, US
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1988 Honda CRX Si w/ JDM b16 - CA (RasmusRic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RasmusRic »</TD></TR><TR><TD CLASS="quote">not a bad way to spend 3k </TD></TR></TABLE>
Thanks man. I wish I could keep her but the money for this is going toward mods for my new baby
Thanks man. I wish I could keep her but the money for this is going toward mods for my new baby
#6
Thread Starter
Join Date: Dec 2005
Location: Sacramento, ca, US
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Speed--Freak)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Speed--Freak »</TD></TR><TR><TD CLASS="quote">Would it make it back to Wisconsin?
Also why doesn't the heat work? Is it the blower?</TD></TR></TABLE>
Well it was working fine and then it just kept getting lower and lower. I believe it the blower. Its the same one from 88 and it just went out a few months ago. Yes it would make it there if you drove it.
Also why doesn't the heat work? Is it the blower?</TD></TR></TABLE>
Well it was working fine and then it just kept getting lower and lower. I believe it the blower. Its the same one from 88 and it just went out a few months ago. Yes it would make it there if you drove it.
#7
Thread Starter
Join Date: Dec 2005
Location: Sacramento, ca, US
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1988 Honda CRX Si w/ JDM b16 - CA (1988c-rex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1988c-rex »</TD></TR><TR><TD CLASS="quote">pm'd
</TD></TR></TABLE>
I didnt get that message from you. Did you send it to my email? cmbsc12@hotmail.com// let me know
</TD></TR></TABLE>
I didnt get that message from you. Did you send it to my email? cmbsc12@hotmail.com// let me know
Trending Topics
#9
Thread Starter
Join Date: Dec 2005
Location: Sacramento, ca, US
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1988 Honda CRX Si w/ JDM b16 - CA (1988c-rex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1988c-rex »</TD></TR><TR><TD CLASS="quote">i just emailed you so let me know if u didn't get it
</TD></TR></TABLE>
Replied
</TD></TR></TABLE>
Replied
#14
Thread Starter
Join Date: Dec 2005
Location: Sacramento, ca, US
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1988 Honda CRX Si w/ JDM b16 - CA (greatbiggiants)
I've had a few request for pics of the motor/// They will be up Wednesday afternoon when I finally get some time off.
#21
Thread Starter
Join Date: Dec 2005
Location: Sacramento, ca, US
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Re: EXTRA CLEAN!! 1988 Honda CRX Si w/ JDM b16 - CA (allaboutdaz)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by allaboutdaz »</TD></TR><TR><TD CLASS="quote">you never returned my PM</TD></TR></TABLE>
where did you send it? I must not have got it because I replied to all the PM's I recieved... Email me at cmbsc12@hotmail.com.
where did you send it? I must not have got it because I replied to all the PM's I recieved... Email me at cmbsc12@hotmail.com.