valve adjustment = cause of misfiring cylinders?
#1
Junior Member
Thread Starter
Join Date: Oct 2002
Location: whoston
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
valve adjustment = cause of misfiring cylinders?
I got my valves adjusted on Friday and I threw a check engline light on sat. Looked at it and it was codes 71-74 - misfiring on all 4 cylinders! Can having your valves adjusted too tight cause this?
#2
Re: valve adjustment = cause of misfiring cylinders? (avex)
No it cannot.
Make sure all the ignition wires are firmly plugged in, and no oil leaks into the spark plug holes. Reset the ECU while you're at it.
Make sure all the ignition wires are firmly plugged in, and no oil leaks into the spark plug holes. Reset the ECU while you're at it.
#3
Honda-Tech Member
iTrader: (5)
Join Date: Jul 2002
Location: PA
Posts: 4,331
Likes: 0
Received 0 Likes
on
0 Posts
Re: valve adjustment = cause of misfiring cylinders? (PupaScoopa)
yes i would definantly take a look at the ignition system and the valvecover seals too. something isn't connected correctly or maybe isn't functioning at all. maybe for some reason something was damaged during the valve adjustment that is causing the misfire. resetting the ECU is always a good idea too.
#4
Honda-Tech Member
Re: valve adjustment = cause of misfiring cylinders? (avex)
I got my valves adjusted on Friday and I threw a check engline light on sat. Looked at it and it was codes 71-74 - misfiring on all 4 cylinders! Can having your valves adjusted too tight cause this?
#5
Honda-Tech Member
Join Date: Feb 2003
Location: Duncannon, PA
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
Re: valve adjustment = cause of misfiring cylinders? (D16Chiovnidca)
Yes, but they would have to be really tight. What year and model is it?
#6
Honda-Tech Member
iTrader: (5)
Join Date: Jul 2002
Location: PA
Posts: 4,331
Likes: 0
Received 0 Likes
on
0 Posts
Re: valve adjustment = cause of misfiring cylinders? (BoostingSnail)
if the valves were adjusted incorrectly, like at the wrong timing point, then yes it could really mess up the combustion process including the misfiring.
#7
Honda-Tech Member
Join Date: Nov 2002
Location: Brookfield il, usa
Posts: 2,436
Likes: 0
Received 0 Likes
on
0 Posts
Re: valve adjustment = cause of misfiring cylinders? (PupaScoopa)
No it cannot.
what the **** are you smoking? it sure can cause a missfire if they are too tight
Trending Topics
#10
Junior Member
Thread Starter
Join Date: Oct 2002
Location: whoston
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Re: valve adjustment = cause of misfiring cylinders? (TurboD16Chiovnidca)
still coding, gonna check it out this weekend. The mechanic adjusted the valves while the car was relatively warm so I dunno if it played a part in the misfiring.
#14
Junior Member
Thread Starter
Join Date: Oct 2002
Location: whoston
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Re: valve adjustment = cause of misfiring cylinders? (ULTRA911)
true, didn't have much of a choice considering that i had to drive the car over to the shop, and I didn't have much time to wait until my engine was completely cool.
#15
Member
Join Date: Jul 2001
Location: Colorado, USA
Posts: 1,245
Likes: 0
Received 0 Likes
on
0 Posts
Re: valve adjustment = cause of misfiring cylinders? (avex)
true, didn't have much of a choice considering that i had to drive the car over to the shop, and I didn't have much time to wait until my engine was completely cool.
#16
Junior Member
Thread Starter
Join Date: Oct 2002
Location: whoston
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Re: valve adjustment = cause of misfiring cylinders? (hybridvteceg)
looks like he did that when I observed him, but the order he adjusted the valves was different than what was stated on c-speedracing.com's how-to. Would that make a difference, also how can you tell TDC using aftermarket cam gears such as AEM?
#17
Honda-Tech Member
Join Date: Feb 2003
Location: Duncannon, PA
Posts: 794
Likes: 0
Received 0 Likes
on
0 Posts
Re: valve adjustment = cause of misfiring cylinders? (avex)
Doesnt matter what order it is in...just so the piston is on TDC of compression stroke....you can set the piston at TDC by watching the cam lobes,line up the crankshaft to 0 degrees, or place a screw driver tip down in the spark plug hole and roll it around till you get to TDC.
Thread
Thread Starter
Forum
Replies
Last Post
Hemix
Honda Civic / Del Sol (1992 - 2000)
12
07-15-2007 01:20 PM
Francois
Honda CRX / EF Civic (1988 - 1991)
4
08-05-2002 07:19 PM