Steering wheel turns by itself???
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: Oklahoma/Texas
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Steering wheel turns by itself???
I have a 92 acura legend and whenever i park on uneven ground the steering wheel turns all by itself... then when i go to pull out i hear a loud pop. Im assuming its the cv joints? But could they really make the wheel turn like that??
#4
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: Oklahoma/Texas
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ckyguy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ckyguy »</TD></TR><TR><TD CLASS="quote">probably not cv joints
more likely tie rod ends and/or bad alignment</TD></TR></TABLE>My instructor at school said it may be the rack... hmmm... anyone agree with that?
more likely tie rod ends and/or bad alignment</TD></TR></TABLE>My instructor at school said it may be the rack... hmmm... anyone agree with that?
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: Oklahoma/Texas
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: Steering wheel turns by itself??? (Qfactor)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Qfactor »</TD></TR><TR><TD CLASS="quote">maybe you got the new system as Lexus, that selfs park. </TD></TR></TABLE>Haha, i was thinkin the exact same thing when i saw it happen. Anyone else have any suggestions? Serious ones?
#11
Re: Steering wheel turns by itself??? (BoltonGSR)
Its either the rack and pinion, or the pump is putting out too much pressure. If its not that, then its alignment. If the caster split is way off, then the steering wheel will turn itself one way depending on the caster angle. The '92 legends have a caster adjustment on the radius rods. I'd say have the alignment checked, and if the cross caster is good (below .5 degrees), I'd say think about replacing the rack, and pinion, and possibly the pump. You might have to have a mechanic check it first to narrow it down to one component.
If the vehicle pulls to one side while you are driving, there is a simple test to try. Put the vehicle in neutral, and turn off the engine (just don't turn the key all the way off, or the wheel will lock, and you could get into an accident), and if it stops pulling, the rack, or the pump is bad. If it keeps pulling, its alignment, or maybe the tires (belt separation, buldges, a different tire on one side compared to the other, etc.)
Hope this helps
If the vehicle pulls to one side while you are driving, there is a simple test to try. Put the vehicle in neutral, and turn off the engine (just don't turn the key all the way off, or the wheel will lock, and you could get into an accident), and if it stops pulling, the rack, or the pump is bad. If it keeps pulling, its alignment, or maybe the tires (belt separation, buldges, a different tire on one side compared to the other, etc.)
Hope this helps
#13
Re: Steering wheel turns by itself??? (BoostedJeff)
some tire also have bad tendacies to go with the ruts in the road...i was driving one day and came to a stop and i had 1st gen parad's on my car at the time and the steering wheel did a complete 180 on me when i came to a stop....i put my stocks back on the next day and came to the same stop sign at it didn't do it again...
#14
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: Oklahoma/Texas
Posts: 1,312
Likes: 0
Received 0 Likes
on
0 Posts
Re: Steering wheel turns by itself??? (loudassVTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by loudassVTEC »</TD></TR><TR><TD CLASS="quote">Its either the rack and pinion, or the pump is putting out too much pressure. If its not that, then its alignment. If the caster split is way off, then the steering wheel will turn itself one way depending on the caster angle. The '92 legends have a caster adjustment on the radius rods. I'd say have the alignment checked, and if the cross caster is good (below .5 degrees), I'd say think about replacing the rack, and pinion, and possibly the pump. You might have to have a mechanic check it first to narrow it down to one component.
If the vehicle pulls to one side while you are driving, there is a simple test to try. Put the vehicle in neutral, and turn off the engine (just don't turn the key all the way off, or the wheel will lock, and you could get into an accident), and if it stops pulling, the rack, or the pump is bad. If it keeps pulling, its alignment, or maybe the tires (belt separation, buldges, a different tire on one side compared to the other, etc.)
Hope this helps</TD></TR></TABLE>Thx for your help. This cooberates with all the advice ive had thusfar...
If the vehicle pulls to one side while you are driving, there is a simple test to try. Put the vehicle in neutral, and turn off the engine (just don't turn the key all the way off, or the wheel will lock, and you could get into an accident), and if it stops pulling, the rack, or the pump is bad. If it keeps pulling, its alignment, or maybe the tires (belt separation, buldges, a different tire on one side compared to the other, etc.)
Hope this helps</TD></TR></TABLE>Thx for your help. This cooberates with all the advice ive had thusfar...
Thread
Thread Starter
Forum
Replies
Last Post