THIS SHOULD BE A STICKY!!!
#1
Honda-Tech Member
Thread Starter
THIS SHOULD BE A STICKY!!!
During my recent turbo project i decided to delete my ABS on my 95 GSR. Once i started driving the car to work out the bugs i noticed my speedometer wasn't working. After trying different sensors and checking plug and wire for faults i couldn't figure it out. Long story short i cut the plug off my ABS harness in the passenger wheel well. The ground wire for the VSS is part of that harness. So if you are having VSS problems and just deleted ABS splice into the black wire on the VSS plug and ground it out. (i attached mine to the ground spot on thermostat.) After that speedometer is working perfectly. I DO NOT KNOW if this is the same for all integras with ABS but it definitely was that way on my 95 Integra GSR. HOPE THIS HELPS SOME PEOPLE!!!! GOOD LUCK OUT THERE
#3
Technical Hero
Join Date: May 2002
Location: Charlotte, NC, 28227
Posts: 9,876
Likes: 0
Received 28 Likes
on
20 Posts
Re: THIS SHOULD BE A STICKY!!!
Kinda like all these wire tuck issue threads lately from diy'rs. You just cut, lengthened, shortened and soldered 100 of wires, I don't even go near those threads.
Thread
Thread Starter
Forum
Replies
Last Post