Repacking Exhaust.
#1
Working
Thread Starter
Repacking Exhaust.
Well I purchased my Tanabe exhaust years ago and it has gotten quite a bit louder so I decided that if I can repack the muffler on a motorcycle then I can do the same on my car. I only documented the process on one of the mufflers but there are two in the system and I figured it would be redundant to show it all twice. Here is the progress thus far.
First I cut out a section in order to get inside the muffler itself. I did not expect to see a lot of packing but I was really suprised on what I found.
All of the packing had deteriorated to the point that it was just like dirt and a few pieces that kind of resembled fiberglass matting.
The stuff in the bottom was kinda stuck there so i had to bust it up a little in order to get it all out.
After that I started cleaning it out.
Now I had to check and make sure that the perforations were still intact and were not blocked.
Then I cleaned out the body and prepped it for the new packing.
Here is the new packing. I picked it up from the local motorcycle shop. They had it for $7.00 a package and it took three to do each muffler. Two might have been ok but I did not want to skimp.
Here is the first piece going in.
Now that it was in I wire tied it to the pipe.
Now that it was securely in there now I started putting in the second piece which will cover the bottom of the muffler and up to the sides.
Here is the second piece in place.
Now the third and last piece goes in and covers the top and fills in the rest of the voids on the sides.
Now all I have to do is weld the top back in and it will all be done and very quiet once again.
26OCT2007
Here is the update after welding up the mufflers. I had to flatten out the piece that I sectioned out to fill the gap left from the cutting wheel but it was not a big deal. Here is two shots of the mufflers.
After installing there was a huge difference in the decibel level all the way from Idle up to WOT. I am very pleased as well.
First I cut out a section in order to get inside the muffler itself. I did not expect to see a lot of packing but I was really suprised on what I found.
All of the packing had deteriorated to the point that it was just like dirt and a few pieces that kind of resembled fiberglass matting.
The stuff in the bottom was kinda stuck there so i had to bust it up a little in order to get it all out.
After that I started cleaning it out.
Now I had to check and make sure that the perforations were still intact and were not blocked.
Then I cleaned out the body and prepped it for the new packing.
Here is the new packing. I picked it up from the local motorcycle shop. They had it for $7.00 a package and it took three to do each muffler. Two might have been ok but I did not want to skimp.
Here is the first piece going in.
Now that it was in I wire tied it to the pipe.
Now that it was securely in there now I started putting in the second piece which will cover the bottom of the muffler and up to the sides.
Here is the second piece in place.
Now the third and last piece goes in and covers the top and fills in the rest of the voids on the sides.
Now all I have to do is weld the top back in and it will all be done and very quiet once again.
26OCT2007
Here is the update after welding up the mufflers. I had to flatten out the piece that I sectioned out to fill the gap left from the cutting wheel but it was not a big deal. Here is two shots of the mufflers.
After installing there was a huge difference in the decibel level all the way from Idle up to WOT. I am very pleased as well.
#4
Honda-Tech Member
Join Date: Aug 2007
Location: Pcola, Florida
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
Re: Repacking Exhaust. (sony224422)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sony224422 »</TD></TR><TR><TD CLASS="quote">isn't that stuff cancerous or no?</TD></TR></TABLE>
see what i mean useless post.
see what i mean useless post.
#5
Working
Thread Starter
Re: Repacking Exhaust. (sony224422)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sony224422 »</TD></TR><TR><TD CLASS="quote">isn't that stuff cancerous or no?</TD></TR></TABLE>
I don't know.
I don't know.
#6
Daisy... Daisy...
Re: Repacking Exhaust. (sony224422)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sony224422 »</TD></TR><TR><TD CLASS="quote">isn't that stuff cancerous or no?</TD></TR></TABLE>
I was requested to keep this on topic. Please do so or the offending posts will be deleted, points docked, etc.
-RedneckDave-, call the manufacturer and ask for the MSDS for the muffler packing. It should list health effects and recommended PPE (personel protective equipment).
BTW: that is a great write-up.
I was requested to keep this on topic. Please do so or the offending posts will be deleted, points docked, etc.
-RedneckDave-, call the manufacturer and ask for the MSDS for the muffler packing. It should list health effects and recommended PPE (personel protective equipment).
BTW: that is a great write-up.
#7
Working
Thread Starter
Re: Repacking Exhaust. (Dogginator)
I did a little research and all I could really find is that most textile grade fibrous glass is a non-carcinogen. I am going to research this matter further, but I have never heard anything bad about this moose brand packing.
Trending Topics
#9
Working
Thread Starter
Re: Repacking Exhaust. (sony224422)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sony224422 »</TD></TR><TR><TD CLASS="quote">thats good to know, i may be doing that too sometime. seems alot cheaper than buying a new muffler.</TD></TR></TABLE>
Yes it is. I should be getting the Mufflers done later on today and the I will be putting them back on the car tonight. I will post some more updates when I get them finished and installed.
Yes it is. I should be getting the Mufflers done later on today and the I will be putting them back on the car tonight. I will post some more updates when I get them finished and installed.
Thread
Thread Starter
Forum
Replies
Last Post